Wraps by car

Haval H6 wrap

The Haval H6 wrap page covers both generations of this SUV, the first from 2014 to 2020 and the second from 2020 to now. A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 72 ft (22 m) instead.

2generations19 mof film for a full wrap

Haval H6, second generation, factory photo
Haval H6, second generation. Factory color shown.

Haval H6 wrap colors and ideas

  • Haval H6 black wrap
  • Haval H6 white wrap
  • Haval H6 gray wrap
  • Haval H6 silver wrap
  • Haval H6 red wrap
  • Haval H6 blue wrap
  • Haval H6 green wrap
  • Haval H6 yellow wrap
  • Haval H6 orange wrap
  • Haval H6 purple wrap
  • Haval H6 pink wrap
  • Haval H6 teal wrap
  • Haval H6 brown wrap
  • Haval H6 gold wrap
  • Haval H6 chrome wrap
  • Haval H6 color shift wrap
  • Haval H6 carbon fiber wrap
  • Haval H6 camo and patterned wrap

How much vinyl to wrap a Haval H6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)183.2 in (4,653 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
2014–2020SUV (5 doors)183.0 in (4,649 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Haval H6 wrap cost factors

The Haval H6 wrap cost depends on the amount of film, the number of panels, and the work needed on parts that come off or get cut around. Both generations are about 183 in (4,650 mm) long and need about 62 ft (19 m) of 60-inch (1.52 m) film for a full wrap. The first generation has roof rails and may have a sunroof, which add steps to the roof work. Trims with parking sensors and fog lamps in the bumpers also need extra cut-outs.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Haval H6 wraps by generation

Swipe sideways. Tap a card for the full description.

Haval H6, second generation, factory photo
Factory color shown

2020–now Haval H6 SUV (second generation)

2020–nowSUV (5 doors)183.2 in (4,653 mm)

The second-generation Haval H6 from 2020 to now is a five-door SUV that is 183.2 in (4,653 mm) long, so it takes about 62 ft (19 m) of 60-inch (1.52 m) cast film for a full wrap. Its body style means the main panels are the hood, roof, doors, fenders, and bumpers. The tailgate has the rear glass in it, and the film ends at the edge of that glass. Chrome or patterned film would raise the estimate to about 72 ft (22 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Haval H6, first generation, factory photo
Factory color shown

2014–2020 Haval H6 SUV (first generation)

2014–2020SUV (5 doors)183.0 in (4,649 mm)

The first-generation Haval H6 from 2014 to 2020 has roof rails on every trim, and they come off before the roof is wrapped, or the film is cut along them. Taking the rails off gives a cleaner edge under them and avoids lifting later. If the film is cut along the rails, the installer works around the rail feet and seals the edges with care. This step adds time to the roof panel compared with a smooth roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Haval H6

A partial wrap on the Haval H6 can cover the roof, hood, and mirror caps instead of the whole vehicle. A chrome delete is a separate job that covers the bright window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips and scratches. These smaller jobs use less film than a full wrap and can be done one at a time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Haval H6: body, cut-outs and film

The Haval H6 vinyl wrap covers a five-door SUV body that is close to 183 in (4,650 mm) long in both generations. The second generation measures 183.2 in (4,653 mm) and the first generation is 183.0 in (4,649 mm), so the film estimate stays the same. The roof, hood, doors, fenders, and bumpers make up the main panels an installer works with. A full wrap uses about 62 ft (19 m) of 60-inch (1.52 m) film on either body.

Haval H6 wrap ideas should account for the parts that need cut-outs or come off before the film goes on. Both generations have a tailgate with the rear glass in it, and the film ends at the edge of the glass. The first generation has roof rails that come off before the roof is wrapped, or the film is cut along them. Some trims of the first generation also have a sunroof, so the roof film is cut around its opening.

How much vinyl to wrap a Haval H6 depends on the generation and the details of the car. The film estimate of about 62 ft (19 m) of 60-inch (1.52 m) cast film holds for both the 2014–2020 and 2020–now bodies. The first generation has roof rails and may have a sunroof, which can change how the roof film is handled. Counting film for this car means checking whether the trim has those roof features.

Questions about wrapping a Haval H6

How much vinyl does it take to wrap a Haval H6?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Haval H6, and with chrome or patterned film the estimate is about 72 ft (22 m). This figure is for the newest body, the second generation from 2020 to now. The first generation from 2014 to 2020 is nearly the same length, so the amount of film does not change much.

Can I wrap only the hood or the roof of a Haval H6?

Yes, you can wrap only the hood or the roof of a Haval H6, and the roof, hood, and mirror caps are a common partial wrap job. A hood wrap protects the front edge from stone chips and changes the look quickly. A roof wrap often pairs with a chrome delete on the window trim and badges for a two-tone scheme. Clear paint protection film (PPF) can also be applied just to the front end.

Is a Haval H6 hard to wrap?

The Haval H6 is not hard to wrap, but the first generation adds work with roof rails on every trim and a sunroof on some trims. The roof film is cut around the sunroof opening, and the rails either come off or the film is cut along them. Both generations have a tailgate with the rear glass in it, so the film ends at the edge of the glass. Some trims also have parking sensors and fog lamps that need cut-outs in the bumper film.

How many generations of the Haval H6 does this page cover?

This page covers two generations of the Haval H6: the first generation from 2014 to 2020 and the second generation from 2020 to now. Both are five-door SUVs with nearly the same length, so the wrap film estimate is similar. The newest body is the second generation, and a full wrap takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.