Wraps by car

Haval Monster wrap

The Haval Monster wrap page covers the first generation of the Haval Monster, sold from 2021 to now. A full vinyl wrap of this SUV takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for roughly 72 ft (22 m).

1generations19.5 mof film for a full wrap

Haval Monster, first generation, factory photo
Haval Monster, first generation. Factory color shown.

Haval Monster wrap colors and ideas

  • Monster black wrap
  • Monster white wrap
  • Monster gray wrap
  • Monster silver wrap
  • Monster red wrap
  • Monster blue wrap
  • Monster green wrap
  • Monster yellow wrap
  • Monster orange wrap
  • Monster purple wrap
  • Monster pink wrap
  • Monster teal wrap
  • Monster brown wrap
  • Monster gold wrap
  • Monster chrome wrap
  • Monster color shift wrap
  • Monster carbon fiber wrap
  • Monster camo and patterned wrap

How much vinyl to wrap a Haval Monster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)188.2 in (4,780 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Monster wrap cost factors

Monster wrap cost depends on the film type, the size of the SUV, and the amount of disassembly. A standard color change uses about 64 ft (19.5 m) of cast film, while chrome or patterned film uses about 72 ft (22 m). The tailgate glass and large panels add labor time to the job.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Monster wraps by generation

Swipe sideways. Tap a card for the full description.

Haval Monster, first generation, factory photo
Factory color shown

2021–now Monster SUV (first generation)

2021–nowSUV (5 doors)188.2 in (4,780 mm)

The first generation Haval Monster is a five-door SUV with a length of 188.2 in (4,780 mm). A full wrap uses about 64 ft (19.5 m) of 60-inch cast film, or about 72 ft (22 m) for chrome or patterned film. The number of panels is typical for an SUV, but the tailgate includes the rear glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Monster

A partial wrap on a Haval Monster can cover the roof, hood, or mirror caps. Monster chrome delete usually means covering the window trim and badges with black film. Paint protection film (PPF) is a clear option for the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Haval Monster: body, cut-outs and film

A Haval Monster vinyl wrap covers a five-door SUV body that is 188.2 in (4,780 mm) long. The large panels and tall sides mean you order film in the full 64 ft (19.5 m) estimate. The roof and hood are wide, so a 60-inch roll leaves little waste on those sections.

Monster wrap ideas can include a full color change or a partial accent on the roof and mirrors. The tailgate has the rear glass built into it, so the film must end at the edge of the glass. You may also wrap the door handles and the front grille for a complete look.

To know how much vinyl to wrap a Monster, you start with the only generation in this catalog. The single body style keeps the estimate consistent at about 64 ft of standard film. Chrome or patterned film raises the figure to about 72 ft because matching patterns creates more waste.

Questions about wrapping a Haval Monster

How much vinyl does it take to wrap a Haval Monster?

A full wrap of a Haval Monster takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 72 ft (22 m). These figures are for the first generation body, the only one in this catalog.

Can I wrap only the hood or the roof of a Monster?

Yes, you can wrap only the hood or the roof of a Monster. The partial wrap options include the roof, hood, and mirror caps. You can also do a chrome delete on the window trim and badges.

Is a Monster hard to wrap?

A Haval Monster is not especially hard to wrap, but its size adds work. The tailgate has the rear glass built in, so the film must be cut around the glass edge. The 188.2 in (4,780 mm) length means more material and more time on the large panels.

How many generations of the Monster does this page cover?

This page covers one generation of the Haval Monster, the first generation sold from 2021 to now. The catalog lists only this generation. All film estimates and wrap notes on this page are for that body.