A Hyundai Kona N wrapped in carbon fiber film starts with the finish: a woven pattern or forged carbon. The weave has a visible grid with a gloss or matte surface, while forged carbon uses an irregular, stone-like layout. You then pick the film line and the shade of black from the group you chose. For a full color change, the 165.9 in (4,215 mm) hatchback needs about 54 ft (16.5 m) of 60-inch film, with extra for the tailgate glass edge.

The factory paint of the Kona N only needs to be clean and smooth for the film to bond well. Seams are normally hidden at panel edges and body lines so the wrap reads as one surface. On this hatchback the tailgate has the rear glass in it, and the film ends at the edge of the glass. A full wrap covers the outside surfaces, but door jambs stay in the original paint unless you ask for them.

A carbon fiber wrap on the Kona N is removable and leaves the factory paint underneath. Hand wash the car with a soft mitt and a mild soap, and avoid automatic brushes. Pressure washing is acceptable at a distance and with a wide fan nozzle. The film needs no wax or sealant, only regular cleaning.