An IM IM6 wrapped in brown starts with choosing the finish, and matte brown changes the look more than a gloss color change. Satin sits between matte and gloss, with a soft sheen that hides dust better than gloss. Your film choice also decides how much texture the color shows on the large side panels. After the finish you pick a film line, because each has its own tone of brown.
Factory paint is the base under the film, so deep scratches or peeling clear coat should be fixed before wrapping. The IM6 has a tailgate with the rear glass in it, and the film ends at the edge of the glass without seams over the panel. Seams are only needed where the film cannot stretch, like deep bumper recesses or the charge port door. A clean paint surface lets the film lay flat and keeps edges tight around the cameras and parking sensors.
A brown wrap on the IM6 is removable, and careful hand washing keeps the film clean without lifting edges. Use a soft mitt and a pH-neutral shampoo, then rinse with low pressure. Avoid automatic brushes and high-pressure jets near the film edges and the sensors. Hand washing also protects the matte and satin finishes from shiny rub marks.


