Wraps by car

Innocenti Elba wrap

The Innocenti Elba wrap page covers the single generation produced from 1991 to 1997. A full vinyl wrap of the wagon body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 62 ft (19 m).

1generations15 mof film for a full wrap

Innocenti Elba, first generation, factory photo
Innocenti Elba, first generation. Factory color shown.

Innocenti Elba wrap colors and ideas

  • Elba black wrap
  • Elba white wrap
  • Elba gray wrap
  • Elba silver wrap
  • Elba red wrap
  • Elba blue wrap
  • Elba green wrap
  • Elba yellow wrap
  • Elba orange wrap
  • Elba purple wrap
  • Elba pink wrap
  • Elba teal wrap
  • Elba brown wrap
  • Elba gold wrap
  • Elba chrome wrap
  • Elba color shift wrap
  • Elba carbon fiber wrap
  • Elba camo and patterned wrap

How much vinyl to wrap an Innocenti Elba

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1997wagon (3 or 5 doors)158.9 in (4,037 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Elba wrap cost factors

Elba wrap cost depends on the film type and the work needed on this 158.9 in (4,037 mm) wagon. The full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, or about 62 ft (19 m) for chrome or patterned film. Preparation and the tailgate glass cut-out also add labor.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: wagon (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Elba wraps by generation

Swipe sideways. Tap a card for the full description.

Innocenti Elba, first generation, factory photo
Factory color shown

1991–1997 Elba wagon (first generation)

1991–1997wagon (3 or 5 doors)158.9 in (4,037 mm)

The first generation Innocenti Elba was produced from 1991 to 1997. Paint age varies on these cars, so panels may be original or repainted. A test spot is recommended before a full wrap to check film adhesion.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Elba

Partial wrap jobs on the Innocenti Elba include the roof, hood, and mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF), a clear film, can be applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Innocenti Elba: body, cut-outs and film

The Innocenti Elba vinyl wrap covers a subcompact wagon with three or five doors. Its overall length is 158.9 in (4,037 mm), which keeps the wrap area modest. The tall rear section and door count affect how panels are divided.

Elba wrap ideas start with planning the tailgate, where the rear glass sits in the panel. The film ends at the edge of the glass, so the installer must trim precisely around it. Door handles, mirrors, and badges need cut-outs or removal.

How much vinyl to wrap an Elba depends on the single generation built from 1991 to 1997. A 60-inch (1.52 m) roll covers the full body with about 49 ft (15 m) of film. If you choose chrome or patterned film, allow about 62 ft (19 m).

Questions about wrapping an Innocenti Elba

How much vinyl does it take to wrap an Innocenti Elba?

A full wrap of the Innocenti Elba takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, plan for about 62 ft (19 m).

Can I wrap only the hood or the roof of an Elba?

Yes, you can wrap only the hood or the roof of an Elba. Partial wrap options for this car include the roof, hood, and mirror caps.

Is an Elba hard to wrap?

An Elba is not the hardest car to wrap, but the tailgate with the rear glass in it requires care. The film must end at the edge of the glass, adding time to the installation. The car's moderate size, 158.9 in (4,037 mm), keeps the job manageable.

How many generations of the Elba does this page cover?

This page covers one generation of the Innocenti Elba, produced from 1991 to 1997.