Wraps by car

Innocenti Mille wrap

The Innocenti Mille wrap page covers the 1994–1997 first generation. This subcompact hatchback came in 3-door and 5-door styles. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

1generations14.5 mof film for a full wrap

Innocenti Mille, first generation, factory photo
Innocenti Mille, first generation. Factory color shown.

Innocenti Mille wrap colors and ideas

  • Mille black wrap
  • Mille white wrap
  • Mille gray wrap
  • Mille silver wrap
  • Mille red wrap
  • Mille blue wrap
  • Mille green wrap
  • Mille yellow wrap
  • Mille orange wrap
  • Mille purple wrap
  • Mille pink wrap
  • Mille teal wrap
  • Mille brown wrap
  • Mille gold wrap
  • Mille chrome wrap
  • Mille color shift wrap
  • Mille carbon fiber wrap
  • Mille camo and patterned wrap

How much vinyl to wrap an Innocenti Mille

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–1997hatchback (3 or 5 doors)143.5 in (3,644 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Mille wrap cost factors

A Mille wrap cost is set by the film type, the wrap shops labor, and the condition of the 1994–1997 body. Solid cast film covers this subcompact with about 48 ft (14.5 m), while chrome or patterned film needs about 56 ft (17 m). Dents, rust, or failing clear coat add surface preparation time before the film goes on.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mille wraps by generation

Swipe sideways. Tap a card for the full description.

Innocenti Mille, first generation, factory photo
Factory color shown

1994–1997 Mille hatchback (first generation)

1994–1997hatchback (3 or 5 doors)143.5 in (3,644 mm)

The 1994–1997 Innocenti Mille first generation has a simple hatchback shape. Panels of this age may be original or repainted, so the installer does a test spot before the full wrap. A test spot checks that the paint will not lift when the film is repositioned or removed later.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Mille

A partial wrap on the Innocenti Mille covers the roof, the hood, or the mirror caps. A Mille chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) is also offered on the front end of this subcompact.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Innocenti Mille: body, cut-outs and film

An Innocenti Mille vinyl wrap fits a car 143.5 in (3,644 mm) long. The short subcompact body means a color change wrap uses about 48 ft (14.5 m) of cast film. The 3-door and 5-door styles share the same panel layout, so the film estimate stays the same for both.

Mille wrap ideas start with the tailgate: the rear glass sits inside it, so the film ends at the edge of the glass. Installers plan cut-outs around door handles, locks, and mirror bases on every wrap. Emblems and badges come off before the vinyl goes on and go back after the film is trimmed.

How much vinyl to wrap a Mille depends on the film type you choose. A solid color wrap needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film on this first generation car. Chrome or patterned film has a directional pattern, so the installer orders about 56 ft (17 m) to match the design across seams.

Questions about wrapping an Innocenti Mille

How much vinyl does it take to wrap an Innocenti Mille?

About 48 ft (14.5 m) of 60-inch (1.52 m) cast film wraps an Innocenti Mille. That is the figure for a solid color change on this 1994–1997 hatchback. A wrap with chrome or a pattern takes about 56 ft (17 m) to align the design.

Can I wrap only the hood or the roof of a Mille?

Yes, you can wrap only the hood or the roof of a Mille. A partial wrap covers the roof, hood, or mirror caps on this car. You can also do a chrome delete on the window trim and badges, or put clear paint protection film on the front end.

Is a Mille hard to wrap?

A Mille is not very hard to wrap, but the tailgate adds a step. The rear glass is set inside the tailgate, so the installer trims the film at the edge of the glass. The body is only 143.5 in (3,644 mm) long, so a full wrap uses a modest amount of film.

How many generations of the Mille does this page cover?

This page covers one generation of the Mille: the first generation, made from 1994 to 1997. The Innocenti Mille catalog here has only the subcompact hatchback of those years.