A Jaguar XFR wrapped in gold starts with a finish decision that changes the whole look. Matte film gives the car a flat, non-reflective surface that hides minor body imperfections. Satin sits between matte and gloss with a slight sheen that is easier to wipe clean than matte. Gloss film looks closest to a factory paint color change with deep reflections.

Factory paint condition is the first thing checked on an XFR before a color change wrap. Stone chips, scratches and peeling clear coat must be repaired because the film follows every defect underneath. The sedan has four doors and the wagon five, with seams placed along panel edges and body lines. A restyled 2011 model has different bumper shapes, so the kit is not interchangeable with earlier cars.

Wraps are removable, so the gold film can be taken off the XFR later without leaving adhesive when removed correctly. Hand wash is the safe method: pressure washing at close range can lift edges, and automatic brushes scratch the film. The tailgate includes the rear glass, so the film ends at the glass edge on both body styles.