Wraps by car

Jaguar XFR wrap

This page covers the Jaguar XFR wrap, a vinyl wrap for one generation built from 2009 to 2015. The catalog includes one generation of the XFR, offered as a sedan or wagon. A full wrap of the newest body uses about 61 ft (18.5 m) of film for the wagon. For the sedan, the estimate is 64 ft (19.5 m) of 60-inch cast film.

1generations18.5 mof film for a full wrap

Jaguar XFR, first generation, factory photo
Jaguar XFR, first generation. Factory color shown.

Jaguar XFR wrap colors and ideas

  • Jaguar XFR black wrap
  • Jaguar XFR white wrap
  • Jaguar XFR gray wrap
  • Jaguar XFR silver wrap
  • Jaguar XFR red wrap
  • Jaguar XFR blue wrap
  • Jaguar XFR green wrap
  • Jaguar XFR yellow wrap
  • Jaguar XFR orange wrap
  • Jaguar XFR purple wrap
  • Jaguar XFR pink wrap
  • Jaguar XFR teal wrap
  • Jaguar XFR brown wrap
  • Jaguar XFR gold wrap
  • Jaguar XFR chrome wrap
  • Jaguar XFR color shift wrap
  • Jaguar XFR carbon fiber wrap
  • Jaguar XFR camo and patterned wrap

How much vinyl to wrap a Jaguar XFR

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2015sedan, wagon (4 or 5 doors)195.3 in (4,961 mm)about 61 ft (18.5 m) for the wagon to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)

Jaguar XFR wrap cost factors

The Jaguar XFR wrap cost depends on the film and the labor for this car. A full wrap uses about 61 ft (18.5 m) to 64 ft (19.5 m) of film, so the film quantity affects the price. The installer's time also matters because the bumpers have sensors and the wagon tailgate has glass. A chrome or patterned film can take up to about 76 ft (23 m), which raises the cost.

  • Film for a full wrap: about 61 ft (18.5 m) for the wagon to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Restyled in 2011: bumpers and lights differ between the versions, and so do the film cuts.

Jaguar XFR wraps by generation

Swipe sideways. Tap a card for the full description.

Jaguar XFR, first generation, factory photo
Factory color shown

2009–2015 Jaguar XFR sedan, wagon (first generation)

2009–2015sedan, wagon (4 or 5 doors)195.3 in (4,961 mm)

The first generation Jaguar XFR was built from 2009 to 2015 as a sedan and wagon. In 2011, the car was restyled with new bumpers and lights, so film cut for one version does not fit the other. A wrap shop cuts the film on the car to match the exact bumper shape. The restyling changes the length of film needed for the bumper pieces.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Film: about 61 ft (18.5 m) for the wagon to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Jaguar XFR

A partial wrap on a Jaguar XFR can cover the roof, hood, or mirror caps. A chrome delete is the covering of the bright window trim and badges with black film. Paint protection film (PPF) is a clear film that goes on the front end of the XFR. These smaller jobs use less film than a full 61 ft (18.5 m) to 64 ft (19.5 m) wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Jaguar XFR: body, cut-outs and film

The Jaguar XFR vinyl wrap works with the full-size body styles of this generation. The sedan and wagon share a length of 195.3 in (4,961 mm), so the amount of film is similar. The wagon needs about 61 ft (18.5 m) of film, while the sedan takes about 64 ft (19.5 m). Both use 60-inch cast film, which gives enough width for the large panels.

Jaguar XFR wrap ideas include cutting around the tailgate glass on the wagon. The tailgate has the rear glass in it, and the film ends at the edge of the glass. Some trims have parking sensors in the bumpers, so the installer cuts the film around each sensor. The bumpers and rockers stay on the car during the wrap.

To know how much vinyl to wrap a Jaguar XFR, count film for the generation and its restyling. The first generation ran from 2009 to 2015 and was restyled in 2011 with new bumpers and lights. A wrap shop measures each panel and adds a little extra for the cut edges. The film estimate is about 61 ft (18.5 m) for the wagon and 64 ft (19.5 m) for the sedan.

Questions about wrapping a Jaguar XFR

How much vinyl does it take to wrap a Jaguar XFR?

A Jaguar XFR takes about 61 ft (18.5 m) to 64 ft (19.5 m) of vinyl for a full wrap. The wagon uses the lower figure of 61 ft (18.5 m) and the sedan uses 64 ft (19.5 m) of 60-inch cast film. A chrome or patterned film needs up to about 76 ft (23 m).

Which years of the Jaguar XFR take the same film cuts?

The Jaguar XFR years from 2009 to 2010 take one set of film cuts. After the 2011 restyling, the bumpers and lights changed, so the 2011 to 2015 models take different cuts. A wrap shop patterns the film to the exact year.

Which Jaguar XFR body takes more film?

The Jaguar XFR sedan takes more film than the wagon. The sedan wrap uses about 64 ft (19.5 m) of film. The wagon uses about 61 ft (18.5 m), so the sedan is the body that needs more film.

Can I wrap only the hood or the roof of a Jaguar XFR?

Yes, you can wrap only the hood or the roof of a Jaguar XFR. A partial wrap covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges. Paint protection film is applied to the front end only.