Wraps by car

Jaguar I-Pace wrap

The Jaguar I-Pace wrap is a full color change with a vinyl wrap, and this page covers the first generation from 2018 to now. The I-Pace is a five-door electric SUV with a length of 184.3 inches (4,682 mm). A full wrap takes about 62 feet (19 meters) of 60-inch (1.52-meter) cast film on the newest body.

1generations19 mof film for a full wrap

Jaguar I-Pace, first generation, factory photo
Jaguar I-Pace, first generation. Factory color shown.

Jaguar I-Pace wrap colors and ideas

  • I-Pace black wrap
  • I-Pace white wrap
  • I-Pace gray wrap
  • I-Pace silver wrap
  • I-Pace red wrap
  • I-Pace blue wrap
  • I-Pace green wrap
  • I-Pace yellow wrap
  • I-Pace orange wrap
  • I-Pace purple wrap
  • I-Pace pink wrap
  • I-Pace teal wrap
  • I-Pace brown wrap
  • I-Pace gold wrap
  • I-Pace chrome wrap
  • I-Pace color shift wrap
  • I-Pace carbon fiber wrap
  • I-Pace camo and patterned wrap

How much vinyl to wrap a Jaguar I-Pace

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowSUV (5 doors)184.3 in (4,682 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

I-Pace wrap cost factors

I-Pace wrap cost depends on the film you choose, the amount of disassembly, and whether you want a full or partial wrap. A full wrap takes about 62 feet (19 meters) of cast film on this car, and chrome or patterned film raises the amount to about 70 feet (21.5 meters). The front and rear bumpers and the mirrors must come off for a clean install, which adds shop time.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2023: bumpers and lights differ between the versions, and so do the film cuts.

I-Pace wraps by generation

Swipe sideways. Tap a card for the full description.

Jaguar I-Pace, first generation, factory photo
Factory color shown

2018–now I-Pace SUV (first generation)

2018–nowSUV (5 doors)184.3 in (4,682 mm)

The first generation Jaguar I-Pace from 2018 to now has a restyling in 2023 that did not change the main body panels. The glass roof is not wrapped, so the roof stays dark whatever the color of the film. Only some trims have the glass roof, while other roofs are metal and can be covered.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an I-Pace

A partial wrap on an I-Pace can cover the hood, mirror caps, or roof on cars without the glass panel. I-Pace chrome delete is a separate job that covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that protects the front end, and it follows the same cut lines as a color change wrap.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Jaguar I-Pace: body, cut-outs and film

The Jaguar I-Pace vinyl wrap follows the SUV's five-door shape, so the tailgate and roof add film area compared with a sedan. The body is 184.3 inches (4,682 mm) long, which means the installer needs long, uncut runs along the sides. Its large rear haunches and deep front bumper also make the wrap a two-person job.

I-Pace wrap ideas start with the cut-outs every trim needs: parking sensors in both bumpers and cameras in the body are cut around each sensor and lens. The tailgate holds the rear glass, so the film ends at the edge of the glass. The charge port door is wrapped as a small piece of its own, and some trims add fog lamps or a styling kit that create more separate pieces.

How much vinyl to wrap an I-Pace stays about 62 feet (19 meters) of 60-inch (1.52-meter) film because the car has one generation from 2018 to now. The 2023 restyling kept the same body panels, so film cuts from 2018 still fit later cars. A trim with chrome or patterned film adds up to about 70 feet (21.5 meters).

Questions about wrapping a Jaguar I-Pace

How much vinyl does it take to wrap a Jaguar I-Pace?

A Jaguar I-Pace takes about 62 feet (19 meters) of 60-inch (1.52-meter) cast film for a full wrap. If you use chrome or patterned film, plan for about 70 feet (21.5 meters). These figures are for the newest body of the first generation.

Can the roof of an I-Pace be wrapped?

Yes, the roof of an I-Pace can be wrapped if it is a metal panel. Some trims have a panoramic glass roof, and glass is not wrapped, so the roof stays its original color. The installer can wrap the metal roof and leave the glass panel exposed.

Which years of the I-Pace take the same film cuts?

All years of the I-Pace take the same film cuts, from 2018 to now. The 2023 restyling did not change the main body panels, so kits from earlier years fit later cars. Trim differences like fog lamps or a styling kit add cut-outs but do not change the base pattern.

Can I wrap only the hood or the roof of an I-Pace?

Yes, you can wrap only the hood or the roof of an I-Pace, and the roof wrap is for cars without the glass panel. You can also wrap the mirror caps or get a chrome delete on the window trim and badges. Paint protection film (PPF) is another partial option for the front end.