Wraps by car

Jaguar S-Type wrap

The Jaguar S-Type wrap page covers the first generation, sold from 1999 to 2008, and the film a full wrap of the newest body takes. A full vinyl wrap of a Jaguar S-Type sedan uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. The car was restyled in 2003, and wrap patterns must follow the version being covered.

1generations18 mof film for a full wrap

Jaguar S-Type, first generation, factory photo
Jaguar S-Type, first generation. Factory color shown.

Jaguar S-Type wrap colors and ideas

  • S-Type black wrap
  • S-Type white wrap
  • S-Type gray wrap
  • S-Type silver wrap
  • S-Type red wrap
  • S-Type blue wrap
  • S-Type green wrap
  • S-Type yellow wrap
  • S-Type orange wrap
  • S-Type purple wrap
  • S-Type pink wrap
  • S-Type teal wrap
  • S-Type brown wrap
  • S-Type gold wrap
  • S-Type chrome wrap
  • S-Type color shift wrap
  • S-Type carbon fiber wrap
  • S-Type camo and patterned wrap

How much vinyl to wrap a Jaguar S-Type

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2008sedan (4 doors)191.4 in (4,861 mm) to 193.1 in (4,905 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

S-Type wrap cost factors

The S-Type wrap cost depends on the size of the car and how much of the chrome trim has to be removed. A full wrap of a 1999–2008 sedan uses about 59 ft (18 m) of film, and the labor grows with each badge and molding that is taken off. The 2003 restyle does not change the amount of film by much, but the newer bumpers take more time to cut around.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Restyled in 2003: bumpers and lights differ between the versions, and so do the film cuts.

S-Type wraps by generation

Swipe sideways. Tap a card for the full description.

Jaguar S-Type, first generation, factory photo
Factory color shown

1999–2008 S-Type sedan (first generation)

1999–2008sedan (4 doors)191.4 in (4,861 mm) to 193.1 in (4,905 mm)

The first generation Jaguar S-Type ran from 1999 to 2008 and was restyled in 2003. The restyling changed the front and rear bumpers and the lights, so film cut for one version does not fit the other. An installer has to check the production date before cutting a kit for the hood or the fenders.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an S-Type

A partial wrap on a Jaguar S-Type can cover the roof, the hood or the mirror caps, and it leaves the rest of the paint alone. An S-Type chrome delete covers the window trim and the badges with black film, which changes the look of the brightwork. Clear paint protection film (PPF) can be put on the front end to guard the hood, fenders and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Jaguar S-Type: body, cut-outs and film

The Jaguar S-Type vinyl wrap has to follow a luxury sedan with four doors and a long body, from 191.4 in (4,861 mm) to 193.1 in (4,905 mm). One size of film covers the whole car from the factory, but the 2003 restyle changed bumper shapes and light sizes. A wrap installer measures each body panel on the car before cutting, since the sedan has no other body style to confuse the pattern.

S-Type wrap ideas start with the chrome trim around the windows and the grille, which vinyl film cannot cover without removing it. The door handles, badges and side moldings come off for a clean wrap, and the installer cuts around the headlights and taillights. The front bumper of the restyled car has a different lower opening, so the film has to be trimmed on the car.

How much vinyl to wrap an S-Type depends on whether the car was built before or after the 2003 restyle. Earlier cars have a simpler front bumper and smaller rear lights, so they can use a little less film around the nose. The later 193.1 in (4,905 mm) body needs the full 59 ft (18 m) estimate, and the earlier 191.4 in (4,861 mm) body is close behind.

Questions about wrapping a Jaguar S-Type

How much vinyl does it take to wrap a Jaguar S-Type?

A full wrap of a Jaguar S-Type takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. This figure covers the sedan body with no chrome or patterned film. A wrap with chrome or a pattern needs about 69 ft (21 m) because the extra film is used to match the design.

Which years of the S-Type take the same film cuts?

The S-Type years from 1999 to 2008 do not all take the same film cuts. The 2003 restyle changed the bumpers and the lights, so a kit cut for a 1999–2002 car will not fit a 2003–2008 car. Installers split the first generation into two pattern sets at the restyle.

Can I wrap only the hood or the roof of an S-Type?

Yes, an S-Type can be wrapped only on the hood or the roof. A partial wrap on this car often covers the roof, the hood or the mirror caps. These panels are flat enough to wrap with less film and less time than a full body wrap.

Is an S-Type hard to wrap?

An S-Type is not the hardest car to wrap, but its size and chrome trim add work. The sedan is 191.4 in (4,861 mm) to 193.1 in (4,905 mm) long, so the installer has to handle large sheets of film. The window trim and badges must be removed or cut around, which adds time to the job.