Wraps by car

Jaguar Mark 2 wrap

The Jaguar Mark 2 wrap page covers the single generation of this full-size sedan built from 1959 to 1967. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 8 ft, bringing the estimate to about 64 ft (19.5 m). The car's 180.0 in (4,572 mm) length and four-door sedan body shape set the base for planning film.

1generations17 mof film for a full wrap

Jaguar Mark 2, first generation, factory photo
Jaguar Mark 2, first generation. Factory color shown.

Jaguar Mark 2 wrap colors and ideas

  • Mark 2 black wrap
  • Mark 2 white wrap
  • Mark 2 gray wrap
  • Mark 2 silver wrap
  • Mark 2 red wrap
  • Mark 2 blue wrap
  • Mark 2 green wrap
  • Mark 2 yellow wrap
  • Mark 2 orange wrap
  • Mark 2 purple wrap
  • Mark 2 pink wrap
  • Mark 2 teal wrap
  • Mark 2 brown wrap
  • Mark 2 gold wrap
  • Mark 2 chrome wrap
  • Mark 2 color shift wrap
  • Mark 2 carbon fiber wrap
  • Mark 2 camo and patterned wrap

How much vinyl to wrap a Jaguar Mark 2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1959–1967sedan (4 doors)180.0 in (4,572 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Mark 2 wrap cost factors

Mark 2 wrap cost depends on the film type, the car's 180.0 in (4,572 mm) length, and the amount of chrome trim. A full wrap uses about 56 ft (17 m) of film, while chrome or patterned film pushes the estimate to 64 ft (19.5 m). Surface preparation on a car from 1959–1967 adds labor when paint is original or uneven. The number of parts removed, like handles and mirrors, also changes the final figure.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Mark 2 wraps by generation

Swipe sideways. Tap a card for the full description.

Jaguar Mark 2, first generation, factory photo
Factory color shown

1959–1967 Mark 2 sedan (first generation)

1959–1967sedan (4 doors)180.0 in (4,572 mm)

The first generation Jaguar Mark 2, built from 1959 to 1967, is the only version of this model. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. Installers check paint adhesion and rust under old paint before committing film. A repainted panel can lift film if the paint was not properly cured or keyed.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Mark 2

Partial wrap options for a Mark 2 include the roof, hood, and mirror caps as separate color changes. Mark 2 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs let an owner change a single area without committing to a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Jaguar Mark 2: body, cut-outs and film

A Jaguar Mark 2 vinyl wrap has one body style to account for: the four-door sedan. The car measures 180.0 in (4,572 mm) long, which places it among full-size classics. Its upright pillars and generous glass area keep most film on the horizontal and vertical panels. Installers count the large roof, hood, and trunk lid as the main film consumers.

Mark 2 wrap ideas must start with the chrome that defines this car. The window surrounds, door handles, bumpers, and grille are bright metal that a wrap can cover or leave exposed. To wrap those parts cleanly, the installer removes handles, mirrors, and some trim before film goes on. The grille and bumpers usually need careful hand trimming and often stay unwrapped.

How much vinyl to wrap a Mark 2 depends on the film choice and the single generation's dimensions. The standard estimate is about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full color change. If you choose chrome or patterned film, plan for about 64 ft (19.5 m) because pattern matching and extra relief cuts consume material. No other generation exists in this catalog, so film quantity stays consistent across all 1959–1967 cars.

Questions about wrapping a Jaguar Mark 2

How much vinyl does it take to wrap a Jaguar Mark 2?

A full Jaguar Mark 2 wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 64 ft (19.5 m) because the pattern repeat and trimming add waste. The single generation's four-door sedan body measures 180.0 in (4,572 mm) long, which sets the base for these figures.

Can I wrap only the hood or the roof of a Mark 2?

Yes, you can wrap only the hood or the roof of a Mark 2. The partial wrap options for this car include the roof, hood, and mirror caps. A roof wrap uses far less film than the full 56 ft (17 m) estimate and lets you test a color before committing to the whole body.

Is a Mark 2 hard to wrap?

The Mark 2 can be hard to wrap because of its chrome trim and 180.0 in (4,572 mm) length. The window surrounds, door handles, bumpers, and grille need removal or careful cutting around. The car's age also means paint condition varies, so a test spot is wise before a full wrap.

How many generations of the Mark 2 does this page cover?

This page covers one generation of the Mark 2. The first generation, built from 1959 to 1967, is the only body style in the catalog. All film estimates and wrap notes refer to that single four-door sedan.