Wraps by car

Jaguar X-Type wrap

This page covers the Jaguar X-Type wrap and the vinyl wrap film it takes. The X-Type was built as one generation from 2001 to 2009. A full wrap of the newest body needs about 52 ft (16 m) of 60-inch (1.52 m) cast film for the sedan and about 62 ft (19 m) for the wagon.

1generations16 mof film for a full wrap

Jaguar X-Type, first generation, factory photo
Jaguar X-Type, first generation. Factory color shown.

Jaguar X-Type wrap colors and ideas

  • X-Type black wrap
  • X-Type white wrap
  • X-Type gray wrap
  • X-Type silver wrap
  • X-Type red wrap
  • X-Type blue wrap
  • X-Type green wrap
  • X-Type yellow wrap
  • X-Type orange wrap
  • X-Type purple wrap
  • X-Type pink wrap
  • X-Type teal wrap
  • X-Type brown wrap
  • X-Type gold wrap
  • X-Type chrome wrap
  • X-Type color shift wrap
  • X-Type carbon fiber wrap
  • X-Type camo and patterned wrap

How much vinyl to wrap a Jaguar X-Type

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2009sedan, wagon (4 or 5 doors)183.9 in (4,672 mm) to 185.7 in (4,716 mm)about 52 ft (16 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

X-Type wrap cost factors

X-Type wrap cost depends on the size of the car and the film you choose. The sedan needs about 52 ft (16 m) and the wagon about 62 ft (19 m) of 60-inch (1.52 m) film. A chrome or patterned film can raise that to roughly 72 ft (22 m). The number of cut-outs and the amount of disassembly also change the labor.

  • Film for a full wrap: about 52 ft (16 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2007: bumpers and lights differ between the versions, and so do the film cuts.

X-Type wraps by generation

Swipe sideways. Tap a card for the full description.

Jaguar X-Type, first generation, factory photo
Factory color shown

2001–2009 X-Type sedan, wagon (first generation)

2001–2009sedan, wagon (4 or 5 doors)183.9 in (4,672 mm) to 185.7 in (4,716 mm)

The first generation Jaguar X-Type ran from 2001 to 2009, with a restyling in 2007. That update altered the bumpers and lights, so wrap patterns are not interchangeable between early and late cars. Installers need to check which version they are quoting. The sedan and the wagon share the same restyling change.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an X-Type

You do not have to wrap the whole Jaguar X-Type to change its look. A partial wrap can cover the roof, the hood, or the mirror caps. X-Type chrome delete turns the bright window trim and badges black with vinyl. Paint protection film (PPF), a clear film on the front end, guards against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Jaguar X-Type: body, cut-outs and film

The Jaguar X-Type vinyl wrap has to cover either a sedan or a wagon. The sedan is 183.9 in (4,672 mm) long and the wagon is 185.7 in (4,716 mm). These mid-size dimensions mean a full wrap uses between 52 and 62 ft of film. The extra tailgate area makes the wagon the larger job.

X-Type wrap ideas start with the fact that the tailgate has the rear glass set into it. The film ends at the edge of that glass, so the tailgate needs a cut-out. Door handles, mirrors, and badges also call for careful trimming. Removing the mirrors gives a cleaner edge on those panels.

How much vinyl to wrap an X-Type depends on which version you have. The 2001 to 2009 range is one generation, but the 2007 restyling changed the bumpers and lights. Film cut for a pre-2007 car will not match a later one. The sedan and the wagon also take different amounts of material.

Questions about wrapping a Jaguar X-Type

How much vinyl does it take to wrap a Jaguar X-Type?

A Jaguar X-Type takes about 52 ft (16 m) of vinyl for the sedan and about 62 ft (19 m) for the wagon. This assumes 60-inch (1.52 m) cast film on the newest body. A chrome or patterned film can need up to 72 ft (22 m). The tailgate cut-out on the wagon uses a little extra material.

Which years of the X-Type take the same film cuts?

The same film cuts fit 2001 to 2006 X-Type models, and a different set fits 2007 to 2009. The 2007 restyling changed the bumpers and lights, so patterns do not cross over. Within each period the sedan and the wagon share the front-end cuts. The wagon body also needs its own tailgate pattern.

Which X-Type body takes more film?

The wagon takes more film than the sedan. The wagon needs about 62 ft (19 m) and the sedan about 52 ft (16 m) of 60-inch (1.52 m) film. The wagon is slightly longer at 185.7 in (4,716 mm) and has a larger tailgate area. That tailgate includes a cut-out for the rear glass.

Can I wrap only the hood or the roof of an X-Type?

Yes, you can wrap only the hood or the roof of an X-Type. A partial wrap on those panels is a smaller job than a full wrap. You can also wrap the mirror caps or do a chrome delete on the window trim and badges. Paint protection film on the front end is another partial option.