Wraps by car

Jaguar 420 wrap

This page covers the Jaguar 420 wrap for the single generation produced from 1966 to 1968. A vinyl wrap on this classic sedan typically uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases that estimate to about 64 ft (19.5 m).

1generations16 mof film for a full wrap

Jaguar 420, first generation, factory photo
Jaguar 420, first generation. Factory color shown.

Jaguar 420 wrap colors and ideas

  • Jaguar 420 black wrap
  • Jaguar 420 white wrap
  • Jaguar 420 gray wrap
  • Jaguar 420 silver wrap
  • Jaguar 420 red wrap
  • Jaguar 420 blue wrap
  • Jaguar 420 green wrap
  • Jaguar 420 yellow wrap
  • Jaguar 420 orange wrap
  • Jaguar 420 purple wrap
  • Jaguar 420 pink wrap
  • Jaguar 420 teal wrap
  • Jaguar 420 brown wrap
  • Jaguar 420 gold wrap
  • Jaguar 420 chrome wrap
  • Jaguar 420 color shift wrap
  • Jaguar 420 carbon fiber wrap
  • Jaguar 420 camo and patterned wrap

How much vinyl to wrap a Jaguar 420

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1966–1968sedan (4 doors)187.5 in (4,762 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Jaguar 420 wrap cost factors

The Jaguar 420 wrap cost depends on the full 187.5 in (4,762 mm) length and the condition of the 1960s panels. A car this old may need more prep time for paint repair or rust treatment, which adds to the total. The amount of film also changes the cost: 52 ft (16 m) for solid cast vinyl, or about 64 ft (19.5 m) with chrome or patterned film.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Jaguar 420 wraps by generation

Swipe sideways. Tap a card for the full description.

Jaguar 420, first generation, factory photo
Factory color shown

1966–1968 Jaguar 420 sedan (first generation)

1966–1968sedan (4 doors)187.5 in (4,762 mm)

The first generation Jaguar 420 covered on this page was built from 1966 to 1968 as a four-door sedan. Paint age matters on a car of these years, because panels may be original or repainted. Always do a test spot before a full wrap to check how the adhesive reacts with old paint.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Jaguar 420

A partial wrap on a Jaguar 420 includes the roof, hood, or mirror caps without the full 52 ft (16 m) of film. Chrome delete covers the window trim and badges with black film for a quieter look. Paint protection film (PPF) goes on the front end as a clear layer against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Jaguar 420: body, cut-outs and film

A Jaguar 420 vinyl wrap covers a compact four-door sedan with a body length of 187.5 in (4,762 mm). Fewer body styles and a single generation simplify the wrap compared with cars that come in multiple sizes. The four doors and the long rear deck add panel count but no complex curves like a modern crossover.

Jaguar 420 wrap ideas work around the bright trim, which can stay in place or be covered with black film as a chrome delete. The door handles, side mirrors, and window trim are removed or masked for clean edges. Bumpers with original paint may need extra prep before film goes over them.

To work out how much vinyl to wrap a Jaguar 420, start with the 52 ft (16 m) figure for the standard color change. Ordering 60-inch (1.52 m) material means fewer seams on the roof and hood. If the design uses chrome or patterned film, plan for about 64 ft (19.5 m).

Questions about wrapping a Jaguar 420

How much vinyl does it take to wrap a Jaguar 420?

A Jaguar 420 takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full color change wrap. If you use chrome or patterned film, plan on about 64 ft (19.5 m). The single sedan body of the 1966–1968 generation needs no extra material for other styles.

Can I wrap only the hood or the roof of a Jaguar 420?

Yes, you can wrap only the hood or the roof of a Jaguar 420. Partial wrap jobs on this car also include mirror caps and the front end with clear paint protection film (PPF). A chrome delete on the window trim and badges is another smaller option.

Is a Jaguar 420 hard to wrap?

A Jaguar 420 is moderately hard to wrap because of its age and the amount of bright trim. The 187.5 in (4,762 mm) body has simple lines but old paint may lift when film is removed. A test spot on every panel tells you if repainting is needed before wrapping.

How many generations of the Jaguar 420 does this page cover?

This page covers one generation of the Jaguar 420, which was built from 1966 to 1968. The catalog lists only that first-generation sedan with its four doors and compact body.