Wraps by car

KGM Musso EV wrap

The KGM Musso EV wrap page covers the first generation of this electric pickup, produced since 2025. A full vinyl wrap of this body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 76 ft (23 m).

1generations20.5 mof film for a full wrap

KGM Musso EV, first generation, factory photo
KGM Musso EV, first generation. Factory color shown.

KGM Musso EV wrap colors and ideas

  • Musso EV black wrap
  • Musso EV white wrap
  • Musso EV gray wrap
  • Musso EV silver wrap
  • Musso EV red wrap
  • Musso EV blue wrap
  • Musso EV green wrap
  • Musso EV yellow wrap
  • Musso EV orange wrap
  • Musso EV purple wrap
  • Musso EV pink wrap
  • Musso EV teal wrap
  • Musso EV brown wrap
  • Musso EV gold wrap
  • Musso EV chrome wrap
  • Musso EV color shift wrap
  • Musso EV carbon fiber wrap
  • Musso EV camo and patterned wrap

How much vinyl to wrap a KGM Musso EV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowpickup (4 doors)203.1 in (5,160 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Musso EV wrap cost factors

Musso EV wrap cost depends on the size of the pickup, the film chosen, and the cut-outs required. The body is 203.1 in (5,160 mm) long, so a full wrap uses more film than a smaller car. Every trim has parking sensors and cameras that add cutting time.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Musso EV wraps by generation

Swipe sideways. Tap a card for the full description.

KGM Musso EV, first generation, factory photo
Factory color shown

2025–now Musso EV pickup (first generation)

2025–nowpickup (4 doors)203.1 in (5,160 mm)

The first generation KGM Musso EV has a pickup bed that makes the cab and the bed two bodies for the film. The inside of the bed stays bare, so film is not wasted there. The sides and outside of the bed are wrapped as part of the lower body.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Musso EV

A partial wrap on a KGM Musso EV can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a KGM Musso EV: body, cut-outs and film

A KGM Musso EV vinyl wrap has to handle a pickup body that measures 203.1 in (5,160 mm) long and 68.9 in (1,750 mm) tall. The cab and the bed are wrapped as two separate bodies, and the inside of the bed stays bare. Parking sensors in the bumpers of every trim require cutting the film around each sensor.

Musso EV wrap ideas include cut-outs for the cameras in the body on every trim. The charge port door is wrapped as a small piece of its own. The roof is reached from a platform because of the tall body.

How much vinyl to wrap a Musso EV depends on the film type and the body areas you cover. The full body estimate is about 67 ft (20.5 m) of standard cast film. Buy about 76 ft (23 m) if you choose chrome or patterned film.

Questions about wrapping a KGM Musso EV

How much vinyl does it take to wrap a KGM Musso EV?

A KGM Musso EV takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for a full wrap. For chrome or patterned film, plan for about 76 ft (23 m).

Is the bed of a Musso EV wrapped?

No, the inside of the bed of a KGM Musso EV is not wrapped. The cab and the outside of the bed are wrapped as two bodies.

Can I wrap only the hood or the roof of a Musso EV?

Yes, you can wrap only the hood or the roof of a KGM Musso EV. A partial wrap can cover the roof, hood, or mirror caps.

Is a Musso EV hard to wrap?

A KGM Musso EV adds work because every trim has parking sensors and cameras that need cut-outs. The tall body (68.9 in (1,750 mm)) means the roof is wrapped from a platform. The pickup bed means the cab and bed are wrapped as separate bodies.