Wraps by car

KGM Torres wrap

The KGM Torres wrap page covers the KGM Torres SUV, which has one generation in the catalog. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 62 ft (19 m).

1generations16.5 mof film for a full wrap

KGM Torres, first generation, factory photo
KGM Torres, first generation. Factory color shown.

KGM Torres wrap colors and ideas

  • Torres black wrap
  • Torres white wrap
  • Torres gray wrap
  • Torres silver wrap
  • Torres red wrap
  • Torres blue wrap
  • Torres green wrap
  • Torres yellow wrap
  • Torres orange wrap
  • Torres purple wrap
  • Torres pink wrap
  • Torres teal wrap
  • Torres brown wrap
  • Torres gold wrap
  • Torres chrome wrap
  • Torres color shift wrap
  • Torres carbon fiber wrap
  • Torres camo and patterned wrap

How much vinyl to wrap a KGM Torres

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowSUV (5 doors)185.2 in (4,705 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Torres wrap cost factors

Torres wrap cost is set by the size of the SUV, the film chosen, and the labor for the fixed parts. At 185.2 in (4,705 mm) long, the vehicle uses about 54 ft (16.5 m) of cast film for a full wrap. Cut-outs for sensors, cameras, and fog lamps, plus work around the roof rails and tailgate glass, add time to the job.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has a rear spoiler: it is wrapped as a piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Torres wraps by generation

Swipe sideways. Tap a card for the full description.

KGM Torres, first generation, factory photo
Factory color shown

2023–now Torres SUV (first generation)

2023–nowSUV (5 doors)185.2 in (4,705 mm)

The first generation KGM Torres, produced from 2023 to now, has a panoramic glass roof on every trim. That roof is not wrapped, so the roof stays dark whatever the color of the film. Installers cut the film along the roof rails or remove the rails before wrapping the roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has a rear spoiler: it is wrapped as a piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Torres

Partial wraps on the KGM Torres can focus on the hood, mirror caps, tailgate, or rear spoiler. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is often a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, tailgate, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a KGM Torres: body, cut-outs and film

A KGM Torres vinyl wrap covers a large five-door SUV that is 185.2 in (4,705 mm) long. The tall sides and long roof add film area compared with a small hatchback. The tailgate has the rear glass set into it, so the film ends at the edge of the glass.

Torres wrap ideas need to account for several fixed parts on the body. Every trim has a panoramic glass roof, roof rails, a rear spoiler, parking sensors, cameras, and fog lamps. The glass is not wrapped, and the roof rails either come off or get the film cut along them. The rear spoiler is wrapped as a piece of its own, while sensors, cameras, and fog lamps need cut-outs in the film.

How much vinyl to wrap a Torres depends on the film type and the body of this single generation. The 2023–now SUV needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a standard color change. Chrome or patterned film requires about 62 ft (19 m) because of extra material for alignment and trimming.

Questions about wrapping a KGM Torres

How much vinyl does it take to wrap a KGM Torres?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap a KGM Torres. Chrome or patterned film needs about 62 ft (19 m). This estimate is for the newest body of the first generation, the 2023–now SUV.

Can the roof of a Torres be wrapped?

Yes, the roof of a Torres can be wrapped, but the panoramic glass roof is not covered by film. The film ends at the edge of the glass and along the roof rails. On every trim, the glass stays dark and the wrap goes around it.

Can I wrap only the hood or the roof of a Torres?

Yes, you can wrap only the hood or the roof of a Torres. The partial wrap options for this model include the hood, mirror caps, tailgate, and rear spoiler. A chrome delete on the window trim and badges is another smaller job.

Is a Torres hard to wrap?

A Torres is moderately hard to wrap because of its size and fixed parts. At 185.2 in (4,705 mm) long, it uses a lot of film and needs careful handling on the tall sides. Cut-outs for parking sensors, cameras, and fog lamps, plus the tailgate glass and roof rails, add work for the installer.