Wraps by car

KGM Rexton wrap

A KGM Rexton wrap uses a vinyl wrap to change the look of the car. The page covers one generation, the 2019–now body. A full wrap of this newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film.

1generations20 mof film for a full wrap

KGM Rexton, second generation, factory photo
KGM Rexton, second generation. Factory color shown.

KGM Rexton wrap colors and ideas

  • Rexton black wrap
  • Rexton white wrap
  • Rexton gray wrap
  • Rexton silver wrap
  • Rexton red wrap
  • Rexton blue wrap
  • Rexton green wrap
  • Rexton yellow wrap
  • Rexton orange wrap
  • Rexton purple wrap
  • Rexton pink wrap
  • Rexton teal wrap
  • Rexton brown wrap
  • Rexton gold wrap
  • Rexton chrome wrap
  • Rexton color shift wrap
  • Rexton carbon fiber wrap
  • Rexton camo and patterned wrap

How much vinyl to wrap a KGM Rexton

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)190.9 in (4,850 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Rexton wrap cost factors

Rexton wrap cost depends on the size of the vehicle and the film used. A full wrap needs about 66 ft (20 m) of standard film, while chrome or patterned film takes about 82 ft (25 m). The number of cut-outs for sensors and fog lamps adds labor. Removing roof rails before the roof wrap also changes the work.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (71.9 in (1,825 mm)): the roof is wrapped from a platform.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

Rexton wraps by generation

Swipe sideways. Tap a card for the full description.

KGM Rexton, second generation, factory photo
Factory color shown

2019–now Rexton SUV (second generation)

2019–nowSUV (5 doors)190.9 in (4,850 mm)

The second generation Rexton began in 2019 with a restyling that changed the bumpers and lights. Film templates from before 2019 do not match the new shapes. A wrap on this body uses cuts for the current front and rear ends. The roof and doors stayed through the restyling.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (71.9 in (1,825 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Rexton

A partial wrap on a Rexton covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) goes on the front end. These jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a KGM Rexton: body, cut-outs and film

A KGM Rexton vinyl wrap covers a five-door SUV with a length of 190.9 in (4,850 mm). The body is tall at 71.9 in (1,825 mm), so the roof is wrapped from a platform. Film estimates count on one tailgate and four doors. The large panels need a full-size roll of cast film.

Rexton wrap ideas start with the tailgate glass, where film ends at the edge of the glass. Every trim has roof rails, which come off before the roof wrap or the film is cut along them. Some trims have parking sensors in the bumpers, and the film is cut around each sensor. Fog lamps in the front bumper on every trim need cut-outs in the bumper film.

To know how much vinyl to wrap a Rexton, check the production years of the body. The catalog lists only the second generation, from 2019 to now. A restyling in 2019 changed the bumpers and lights, so film cut for one version does not fit the other. Anyone who counts film for this car plans for the current body.

Questions about wrapping a KGM Rexton

How much vinyl does it take to wrap a KGM Rexton?

A KGM Rexton takes about 66 ft (20 m) of 60-inch (1.52 m) cast film for a full wrap. The number covers the whole exterior of the 2019–now body. The figure is for standard film without chrome or pattern.

Which years of the Rexton take the same film cuts?

The Rexton years from 2019 to now take the same film cuts. There was one restyling in 2019 that changed the bumpers and lights, so pre-2019 cuts do not fit. All listed bodies share the same shape after that year.

Can I wrap only the hood or the roof of a Rexton?

Yes, you can wrap only the hood or the roof of a Rexton. A partial wrap includes the roof, hood, or mirror caps. These jobs are smaller than a full wrap and need less film.

Is a Rexton hard to wrap?

A Rexton is hard to wrap because of its tall body at 71.9 in (1,825 mm), which means the roof is wrapped from a platform. Every trim has roof rails that must come off or be cut around. Some trims have parking sensors that require film cut around each sensor. Fog lamps in the front bumper need cut-outs.