Every IS F wrapped in purple starts with a decision between matte, satin and gloss. The color change film follows the sedan's creased fender lines best when the film has a low initial tack during repositioning. Gloss purple reads closest to a repaint, while matte purple hides minor surface waviness better. The four-door shape and flat rear deck make the roof and trunk straightforward for a single installer.
A color change hides factory paint only where the film lies completely flat. The IS F's factory paint condition matters most at the hood edge and the trunk lip, where seams can lift if the clear coat is failing. Parking sensors sit in both bumpers on every trim, so the film is cut around each sensor and the edge is sealed. The sedan's doors are tall enough that a single sheet of 60-inch (1.52 m) film covers each door without a splice.
The film is removable by design, but the job needs heat and a slow pull. Hand wash is the safe cleaning method for a wrapped IS F, and it avoids lifting the film at the mirror caps and sensor cut-outs. Soap and a microfiber mitt clean the purple surface without scratching the matte or gloss finish. Any residue from the adhesive wipes off with a dedicated wrap cleaner after the film is removed.


