Matte, satin and super matte blue films give the Roadster a low-sheen look that softens its curves, with 54 films in this group. KPMF Sky Blue Matt VWS Airelease liner K89063 has a matte finish and a pale blue that suits the Roadster's compact shape. Platinum Wrapping Film Matt Anodized Dark Blue CC 4158 is a matte film with a darker metallic tone, ideal for a more aggressive look. Super matte films in this group take that flat effect further, hiding fingerprints and light reflections better than standard matte.
Gloss and high gloss blue films make the Roadster's panels look like a deeper factory paint, with 148 films in this group. Arlon Gloss Berry Blue 414 is a gloss film with a rich, saturated blue that pops in direct sunlight. ORAFOL King blue 049 G is a gloss film with a classic royal blue tone that works well on the Roadster's small body. High gloss variants add a wet-look shine that emphasizes the car's curves and body lines.
Metallic, glitter and pearl blue films add texture and sparkle to the Roadster's paint, with 156 films in this group. VViViD ULTRA-MATTE® Blue Steel VVULTRGL-STLTBLUESTEEL is a metallic film with a matte finish and a steel blue hue. Avery Dennison Gloss Metallic Dark Blue SW900-653-M is a metallic film with a deep blue glow and glossy shine. Pearl films in this group shift color slightly under different light, giving the Roadster a custom look.
Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.
Years
Body
Length
Film to order
2011–2015
convertible (2 doors)
146.8 in (3,728 mm)
about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m)
Blue Roadster wraps by generation
Swipe sideways. Tap a card for the full description.
Factory color shown
2011–2015 Roadster (first generation): satin blue
2011–2015convertible (2 doors)146.8 in (3,728 mm)
Wrapping a Roadster means leaving the fabric top uncovered, because film will not adhere to it. The film ends where the top begins, usually along the windshield header and the rear deck. On this convertible, the wrap covers the hood, fenders, doors, and rear quarters only.
A satin blue vinyl wrap on this body gives the Roadster a modern, understated look. The fabric top in black or dark gray contrasts well with satin blue panels. Satin finishes on small convertibles hide minor surface imperfections better than gloss.
Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).
Partial blue wrap, chrome delete and PPF on a Roadster
Blue partial wrap for the Roadster
A partial wrap in blue covers the hood, mirror caps, and rear deck, leaving the rest of the factory paint visible. For a typical car of this body type, the hood needs about 3 m (10 ft) of film. This is a practical way to add color without wrapping the whole car.
Roadster chrome delete
Chrome delete turns the Roadster's window trim and badges black, either in gloss or satin finish, next to a blue body. This blackout treatment gives the car a more unified, sporty look. It is often done at the same time as a full color change wrap.
Paint protection film on a Roadster
Paint protection film (PPF) is a clear or matte film applied to the front end to guard against stone chips. It can be installed over the factory paint or over a fresh blue wrap. On the Roadster, PPF is often applied to the hood, bumper, and mirror caps.
Wrapping an MINI Roadster in blue: film, fit and upkeep
A Roadster wrapped in blue begins with a finish choice: matte, satin, or gloss.
Factory paint under the wrap matters less than the surface it will bond to, so panels must be clean and smooth.
The wrap is removable and hand wash is the only safe cleaning method.
How much does it cost to wrap an MINI Roadster in blue?
The cost to wrap an MINI Roadster in blue depends on the amount of film, the film line and finish, labor, paint preparation, and whether door jambs are included. No single figure applies to every job, and a partial wrap costs less than a full color change.
Can a leased Roadster be wrapped?
Yes, a leased Roadster can be wrapped. The wrap is removable and should be taken off before returning the car. The factory paint remains undamaged if the wrap was installed correctly.
Will removing a blue wrap damage the factory paint?
No, removing a blue wrap will not damage the factory paint if the paint was in good condition and the film was removed carefully. Any damage is usually due to poor paintwork or improper removal. Using a professional installer reduces the risk.
How do I choose a wrap shop for the Roadster?
To choose a wrap shop for your Roadster, look for experience with convertibles, a portfolio of previous work, and good online reviews. Ask what films they carry and how they handle the fabric top edges. A shop that wraps this body regularly will know the seams and cut lines that work best.
Does a blue wrap show dirt, heat or fading more than other colors?
A blue wrap shows dirt more visibly than lighter colors, and darker blue absorbs more heat in the sun. Matte finishes hide dust better than gloss, and lighter blues stay cooler than dark navy. The color does not affect how long the film itself lasts.
Is the folding top of the Roadster wrapped too?
No, the folding top of the Roadster is not wrapped because it is a fabric top. The film ends where the top begins, and the top remains its original color.