Wraps by car

MINI Roadster wrap

The MINI Roadster wrap is covered in detail on this page. The MINI Roadster was produced in one generation from 2011 to 2015. A full vinyl wrap of the Roadster body takes about 39 ft (12 m) of 60-inch (1.52 m) cast film.

1generations12 mof film for a full wrap

MINI Roadster, first generation, factory photo
MINI Roadster, first generation. Factory color shown.

MINI Roadster wrap colors and ideas

  • Roadster black wrap
  • Roadster white wrap
  • Roadster gray wrap
  • Roadster silver wrap
  • Roadster red wrap
  • Roadster blue wrap
  • Roadster green wrap
  • Roadster yellow wrap
  • Roadster orange wrap
  • Roadster purple wrap
  • Roadster pink wrap
  • Roadster teal wrap
  • Roadster brown wrap
  • Roadster gold wrap
  • Roadster chrome wrap
  • Roadster color shift wrap
  • Roadster carbon fiber wrap
  • Roadster camo and patterned wrap

How much vinyl to wrap an MINI Roadster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2015convertible (2 doors)146.8 in (3,728 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m)

Roadster wrap cost factors

Roadster wrap cost depends on the film used, the condition of the paint, and the labor needed for this car. The Roadster length is 146.8 in (3,728 mm) and a full wrap takes about 39 ft (12 m) of film. A chrome or patterned film needs about 44 ft (13.5 m) and adds more installation time. The convertible top and the parking sensors also add steps that affect the total.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Roadster wraps by generation

Swipe sideways. Tap a card for the full description.

MINI Roadster, first generation, factory photo
Factory color shown

2011–2015 Roadster convertible (first generation)

2011–2015convertible (2 doors)146.8 in (3,728 mm)

The open top of the Roadster is not wrapped in vinyl. The fabric top is left uncovered and the film ends at the edge where it begins. The installer cuts the film cleanly along that edge to create a neat boundary.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).

Roof, hood, chrome delete and PPF on a Roadster

Partial wrap options for the Roadster include the hood, mirror caps and rear deck. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MINI Roadster: body, cut-outs and film

A MINI Roadster vinyl wrap changes with the body style and the size of the car. The Roadster is a subcompact convertible with two doors and a length of 146.8 in (3,728 mm). The small body and curved panels require careful film stretching and trimming. A two-door convertible has fewer door handles and window frames to work around than a four-door hatch.

Roadster wrap ideas begin with the parts that need cut-outs or come off. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. Some trims have fog lamps in the front bumper that need cut-outs in the bumper film. The fabric top is not wrapped, and the film ends where the top begins.

How much vinyl to wrap a Roadster depends on the film chosen and the generation. The only generation of the Roadster was built from 2011 to 2015 with the same body shape. A full wrap takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, the estimate rises to about 44 ft (13.5 m).

Questions about wrapping an MINI Roadster

How much vinyl does it take to wrap an MINI Roadster?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap a MINI Roadster. If you choose a chrome or patterned film, the estimate is about 44 ft (13.5 m).

Is the top of a Roadster wrapped?

No, the top of a Roadster is not wrapped. The fabric top is left uncovered and the film ends where the top begins.

Can I wrap only the hood or the roof of a Roadster?

Yes, you can wrap only the hood or the rear deck of a Roadster. A partial wrap can also cover the mirror caps.

Is a Roadster hard to wrap?

Yes, a Roadster is a small car with some details that add work. The convertible top must be masked off so the film does not stick to it. Every trim has parking sensors in the bumpers that need cut-outs. The car is 146.8 in (3,728 mm) long, so the panels are manageable but curved.