Wraps by car

MINI Clubman wrap

The MINI Clubman wrap page covers the two generations of this subcompact wagon and hatchback built since 2007. Owners can compare the first generation 2007–2015 with the second generation 2015–now. A full wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap.

2generations16 mof film for a full wrap

MINI Clubman, second generation, factory photo
MINI Clubman, second generation. Factory color shown.

MINI Clubman wrap colors and ideas

  • Clubman black wrap
  • Clubman white wrap
  • Clubman gray wrap
  • Clubman silver wrap
  • Clubman red wrap
  • Clubman blue wrap
  • Clubman green wrap
  • Clubman yellow wrap
  • Clubman orange wrap
  • Clubman purple wrap
  • Clubman pink wrap
  • Clubman teal wrap
  • Clubman brown wrap
  • Clubman gold wrap
  • Clubman chrome wrap
  • Clubman color shift wrap
  • Clubman carbon fiber wrap
  • Clubman camo and patterned wrap

How much vinyl to wrap an MINI Clubman

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowwagon (5 doors)167.4 in (4,253 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
2007–2015hatchback (3 or 5 doors)155.0 in (3,937 mm) to 155.9 in (3,961 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Clubman wrap cost factors

The Clubman wrap cost depends on the size of the car and the amount of film needed for its generation. A second generation body is longer and takes more material than the first generation. The presence of sensors or fog lamps on some trims adds labor for cutting around them. A chrome or patterned film also requires more film than a standard cast color.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

Clubman wraps by generation

Swipe sideways. Tap a card for the full description.

MINI Clubman, second generation, factory photo
Factory color shown

2015–now Clubman wagon (second generation)

2015–nowwagon (5 doors)167.4 in (4,253 mm)

The second generation MINI Clubman built from 2015 to the present was restyled in 2019. Bumpers and lights changed, so film cut for one version does not fit the other. Installers should verify the production date before cutting panels. This restyling affects how much vinyl to wrap a Clubman for those model years.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

MINI Clubman, first generation, factory photo
Factory color shown

2007–2015 Clubman hatchback (first generation)

2007–2015hatchback (3 or 5 doors)155.0 in (3,937 mm) to 155.9 in (3,961 mm)

For the first generation MINI Clubman built from 2007 to 2015, paint age matters before wrapping. Panels may be original or repainted, and a test spot comes before a full wrap. The wrap film adheres only to sound paint, so inspecting each panel is part of the job. This careful check helps the installer plan the work on these older cars.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Clubman

A partial wrap on a MINI Clubman can cover the roof, hood, or mirror caps without wrapping the whole car. Clubman chrome delete covers the window trim and badges with black film to change the bright finish. Paint protection film (PPF) can be applied as a clear film on the front end to guard against stone chips. These options let owners update the look or protect the paint without a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MINI Clubman: body, cut-outs and film

The MINI Clubman vinyl wrap job depends on the body style and size of each generation. The second generation is a wagon with five doors measuring 167.4 in (4,253 mm) long. The first generation is a hatchback with three or five doors and a length of 155.0 in (3,937 mm) to 155.9 in (3,961 mm). These differences mean the primer edition needs less film and fewer cut-outs.

For Clubman wrap ideas, note the parts that need cut-outs or removal before wrapping. Both generations have a tailgate with the rear glass in it, so the film ends at the edge of the glass. Some trims have fog lamps in the front bumper, and on the second generation some trims also have parking sensors in the bumpers. The installer cuts the film around each lamp or sensor.

If you need to know how much vinyl to wrap a Clubman, the film estimate changes with the generation. A first generation car uses about 46 ft (14 m) of 60-inch (1.52 m) cast film. A second generation car requires about 52 ft (16 m) of the same film. Choosing chrome or patterned film adds roughly a third more material for either body.

Questions about wrapping an MINI Clubman

How much vinyl does it take to wrap an MINI Clubman?

About 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap is needed for a full wrap of the second generation MINI Clubman. This figure applies to the body built from 2015 to the present. A chrome or patterned film requires more material, about 67 ft (20.5 m).

Which years of the Clubman take the same film cuts?

The same film cuts fit the first generation 2007–2015 until its restyling in 2010, and the second generation 2015–now until its restyling in 2019. For each generation, cars built before and after the restyling year have different bumper and light shapes. You must match the film kit to the production year of the car.

Can I wrap only the hood or the roof of a Clubman?

Yes, you can wrap only the hood or the roof of a Clubman as a partial wrap. Mirror caps are also a common choice for a partial wrap. This approach uses much less film than a full car wrap.

Is a Clubman hard to wrap?

A Clubman is not especially hard to wrap, but it adds work from its tailgate design and optional sensors. The tailgate glass means the film ends at the glass edge, which requires careful trimming. Some trims have fog lamps or parking sensors that need individual cut-outs. The compact size keeps the job manageable for an experienced installer.