Wraps by car

MINI Coupe wrap

The MINI Coupe wrap page covers the 2011–2015 first generation of this two-door hatchback. This model, known by its R58 code, is the only generation in the catalog. A full wrap of the MINI Coupe body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast vinyl wrap film.

1generations13.5 mof film for a full wrap

MINI Coupe, first generation, factory photo
MINI Coupe, first generation. Factory color shown.

MINI Coupe wrap colors and ideas

  • Coupe black wrap
  • Coupe white wrap
  • Coupe gray wrap
  • Coupe silver wrap
  • Coupe red wrap
  • Coupe blue wrap
  • Coupe green wrap
  • Coupe yellow wrap
  • Coupe orange wrap
  • Coupe purple wrap
  • Coupe pink wrap
  • Coupe teal wrap
  • Coupe brown wrap
  • Coupe gold wrap
  • Coupe chrome wrap
  • Coupe color shift wrap
  • Coupe carbon fiber wrap
  • Coupe camo and patterned wrap

How much vinyl to wrap an MINI Coupe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2015hatchback (2 doors)146.8 in (3,728 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Coupe wrap cost factors

Coupe wrap cost depends on the film choice and the amount of cut-outs on the small 146.8 in (3,728 mm) body. A standard color wrap uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 54 ft (16.5 m). The parking sensors and possible fog lamp cut-outs add labor time to the job.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (2 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Coupe wraps by generation

Swipe sideways. Tap a card for the full description.

MINI Coupe, first generation, factory photo
Factory color shown

2011–2015 Coupe hatchback (first generation)

2011–2015hatchback (2 doors)146.8 in (3,728 mm)

The first generation MINI Coupe, built from 2011 to 2015, may have original or repainted panels due to paint age. A test spot on the paint before a full wrap shows whether the film will bond well. This check matters because the car is from a short production run and panels may have been repaired.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Coupe

A partial wrap on the MINI Coupe can cover the roof, hood, or mirror caps as separate jobs. A chrome delete turns the window trim and badges black with vinyl film. Clear paint protection film (PPF) on the front end guards the leading edges against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MINI Coupe: body, cut-outs and film

A MINI Coupe vinyl wrap is sized to its compact 146.8 in (3,728 mm) length and two-door body. The single hatchback style has two long side doors, and each door is one large piece of film. The short rear end means the tailgate with its glass is one of the last panels to cover.

Coupe wrap ideas start with the bumpers, because every trim has parking sensors that need cut-outs in the film. Some trims also have fog lamps in the front bumper, so the bumper film gets extra cut-outs around those lamps. The tailgate holds the rear glass in it, and the film ends at the edge of the glass.

When you work out how much vinyl to wrap a Coupe, remember that only one generation exists, from 2011–2015. The single body style means the film estimate does not change between trims. The standard estimate is about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping an MINI Coupe

How much vinyl does it take to wrap an MINI Coupe?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film to wrap a MINI Coupe fully. This figure covers the first generation body from 2011–2015 and is based on the single hatchback style.

Can I wrap only the hood or the roof of a Coupe?

Yes, you can wrap only the hood or the roof of a Coupe. A partial wrap can be just the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges.

Is a Coupe hard to wrap?

A MINI Coupe is not the easiest wrap because the bumpers have parking sensors on every trim that need cut-outs. The tailgate with its glass and the possibility of fog lamp cut-outs on some trims add work. Still, the small 146.8 in (3,728 mm) body keeps the overall job compact.

How many generations of the Coupe does this page cover?

This page covers one generation of the MINI Coupe, the first generation from 2011–2015. It is the only generation listed in the catalog for this model.