Wraps by car

MINI Aceman wrap

The MINI Aceman wrap page covers the first-generation electric SUV, produced from 2024 to the present. A full vinyl wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the amount rises to about 62 ft (19 m).

1generations16 mof film for a full wrap

MINI Aceman, first generation, factory photo
MINI Aceman, first generation. Factory color shown.

MINI Aceman wrap colors and ideas

  • Aceman black wrap
  • Aceman white wrap
  • Aceman gray wrap
  • Aceman silver wrap
  • Aceman red wrap
  • Aceman blue wrap
  • Aceman green wrap
  • Aceman yellow wrap
  • Aceman orange wrap
  • Aceman purple wrap
  • Aceman pink wrap
  • Aceman teal wrap
  • Aceman brown wrap
  • Aceman gold wrap
  • Aceman chrome wrap
  • Aceman color shift wrap
  • Aceman carbon fiber wrap
  • Aceman camo and patterned wrap

How much vinyl to wrap an MINI Aceman

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)160.6 in (4,079 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Aceman wrap cost factors

An Aceman wrap cost depends on the size of the SUV, the film chosen, and how much of the body is covered. The full wrap uses about 52 ft (16 m) of cast film, or 62 ft (19 m) with chrome or patterned film. Removing roof rails, cutting around sensors, and wrapping the charge port door add labor. The final figure reflects the shop's hourly rate and the condition of the paint.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Aceman wraps by generation

Swipe sideways. Tap a card for the full description.

MINI Aceman, first generation, factory photo
Factory color shown

2024–now Aceman SUV (first generation)

2024–nowSUV (5 doors)160.6 in (4,079 mm)

The first-generation Aceman has a panoramic glass roof on some trims, and that glass is not wrapped. The roof stays dark whatever the color of the film, so the wrapper plans the roof area around the panel. Cars without the glass roof can have the whole roof covered.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Aceman

A partial wrap on the Aceman can cover the hood, mirror caps, and the roof on cars without the glass panel. An Aceman chrome delete uses black film on the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MINI Aceman: body, cut-outs and film

The MINI Aceman vinyl wrap follows the lines of a compact five-door SUV, 160.6 in (4,079 mm) long. The short body keeps material use moderate, but the taller roof and upright tailgate add surface area compared with a lower hatchback. A single body style means the film estimate holds for every Aceman built so far.

Aceman wrap ideas should account for the tailgate, where the film ends at the edge of the rear glass. Roof rails come off for a clean roof wrap, or the film is cut along them. The charge port door is wrapped as its own small piece, and parking sensors and cameras need cut-outs around each lens.

How much vinyl to wrap an Aceman stays the same for the one generation in the catalog. The first-generation body has not changed its external dimensions since 2024. A wrapper counts the same film for any Aceman, because there are no earlier body styles or longer variants.

Questions about wrapping an MINI Aceman

How much vinyl does it take to wrap an MINI Aceman?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl to wrap a MINI Aceman. With chrome or patterned film, the figure rises to about 62 ft (19 m). These amounts cover the full exterior of the first-generation body.

Can the roof of an Aceman be wrapped?

Yes, the roof of an Aceman can be wrapped, but the glass roof is not covered. The film ends at the roof rails, and the panoramic panel stays dark. Cars without the glass panel can have the entire roof wrapped.

Can I wrap only the hood or the roof of an Aceman?

Yes, you can wrap only the hood or the roof of an Aceman. A partial wrap covers the hood, mirror caps, and the roof on cars without the glass panel. The roof wrap does not include the glass roof.

Is an Aceman hard to wrap?

An Aceman is not especially hard to wrap, but it has features that add work. The tailgate glass, roof rails, parking sensors, and cameras need careful cut-outs or removal. The charge port door is wrapped as a separate small piece. The short 160.6 in (4,079 mm) body keeps the job manageable.