Wraps by car

MINI Paceman wrap

This page covers the MINI Paceman wrap, a vinyl wrap project for the single generation produced from 2012 to 2017. A full wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 62 ft (19 m).

1generations16 mof film for a full wrap

MINI Paceman, first generation, factory photo
MINI Paceman, first generation. Factory color shown.

MINI Paceman wrap colors and ideas

  • Paceman black wrap
  • Paceman white wrap
  • Paceman gray wrap
  • Paceman silver wrap
  • Paceman red wrap
  • Paceman blue wrap
  • Paceman green wrap
  • Paceman yellow wrap
  • Paceman orange wrap
  • Paceman purple wrap
  • Paceman pink wrap
  • Paceman teal wrap
  • Paceman brown wrap
  • Paceman gold wrap
  • Paceman chrome wrap
  • Paceman color shift wrap
  • Paceman carbon fiber wrap
  • Paceman camo and patterned wrap

How much vinyl to wrap an MINI Paceman

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2017hatchback (3 doors)162.4 in (4,124 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Paceman wrap cost factors

Paceman wrap cost depends on the size of the car, the film type, and the condition of the paint. This Paceman is 162.4 in (4,124 mm) long and a full wrap uses about 52 ft (16 m) of film. The tailgate with glass and fog lamp cut-outs add a little labor to the job.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Paceman wraps by generation

Swipe sideways. Tap a card for the full description.

MINI Paceman, first generation, factory photo
Factory color shown

2012–2017 Paceman hatchback (first generation)

2012–2017hatchback (3 doors)162.4 in (4,124 mm)

The first generation MINI Paceman was built from 2012 to 2017, and paint age matters for a wrap. Panels on a car of these years may be original or repainted. A test spot before a full wrap shows whether the film will adhere safely.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Paceman

A partial wrap on a MINI Paceman can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MINI Paceman: body, cut-outs and film

A MINI Paceman vinyl wrap fits a three-door hatchback body that is 162.4 in (4,124 mm) long. The compact size keeps material use moderate, with the tailgate glass and long doors shaping the layout. Each side is made up of large, simple panels.

Paceman wrap ideas must account for the tailgate with integrated rear glass, where film ends at the edge of the glass. The two long side doors are each wrapped as one large piece. Every trim has fog lamps in the front bumper, so the bumper film needs cut-outs.

To know how much vinyl to wrap a Paceman, use the estimate for the first generation body. Count on about 52 ft (16 m) of 60-inch (1.52 m) cast film for a standard color change. Chrome or patterned film requires about 62 ft (19 m), because matching patterns adds waste.

Questions about wrapping an MINI Paceman

How much vinyl does it take to wrap an MINI Paceman?

About 52 ft (16 m) of 60-inch (1.52 m) cast film is needed to wrap a MINI Paceman. If you use chrome or patterned film, allow about 62 ft (19 m). The estimate is for the newest body of the single generation.

Can I wrap only the hood or the roof of a Paceman?

Yes, you can wrap only the hood or the roof of a Paceman. A partial wrap on this car also includes the mirror caps as an option. These smaller jobs use less film than a full wrap.

Is a Paceman hard to wrap?

A Paceman is not the easiest car to wrap, because the tailgate has the rear glass in it. The film must end at the edge of the glass, and every trim has fog lamps in the front bumper that need cut-outs. Its length of 162.4 in (4,124 mm) is moderate, but the details add work.

How many generations of the Paceman does this page cover?

One generation of the Paceman is covered on this page. It was produced from 2012 to 2017. There are no other generations in the catalog.