Wraps by car

MINI Cabrio wrap

This page covers the MINI Cabrio and its vinyl wrap across four generations. The newest body needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film for a full wrap. For chrome or patterned film, the figure rises to about 54 ft (16.5 m). A full wrap of the newest body therefore demands careful film planning.

4generations12.5 mof film for a full wrap

MINI Cabrio, fourth generation, factory photo
MINI Cabrio, fourth generation. Factory color shown.

MINI Cabrio wrap colors and ideas

  • Cabrio black wrap
  • Cabrio white wrap
  • Cabrio gray wrap
  • Cabrio silver wrap
  • Cabrio red wrap
  • Cabrio blue wrap
  • Cabrio green wrap
  • Cabrio yellow wrap
  • Cabrio orange wrap
  • Cabrio purple wrap
  • Cabrio pink wrap
  • Cabrio teal wrap
  • Cabrio brown wrap
  • Cabrio gold wrap
  • Cabrio chrome wrap
  • Cabrio color shift wrap
  • Cabrio carbon fiber wrap
  • Cabrio camo and patterned wrap

How much vinyl to wrap an MINI Cabrio

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowconvertible (2 doors)152.7 in (3,879 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
2015–nowconvertible (2 doors)150.4 in (3,821 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
2009–2015convertible (2 doors)143.9 in (3,655 mm) to 148.0 in (3,758 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
2004–2008convertible (2 doors)143.1 in (3,635 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Cabrio wrap cost factors

Cabrio wrap cost depends on film footage, body length, and the cut-outs this car requires. Shorter generations like the first at 143.1 in (3,635 mm) use less film than the fourth at 152.7 in (3,879 mm). A chrome or patterned wrap adds about 13 ft (4 m) of material over a standard cast film. The final figure also reflects labor for sensors, cameras, and the convertible top edges.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

Cabrio wraps by generation

Swipe sideways. Tap a card for the full description.

MINI Cabrio, fourth generation, factory photo
Factory color shown

2024–now Cabrio convertible (fourth generation)

2024–nowconvertible (2 doors)152.7 in (3,879 mm)

On the fourth generation MINI Cabrio, the open top is not wrapped. The fabric roof stays bare, and the film ends cleanly where the roof begins. Every trim has parking sensors and cameras, so the bumper and body panels need precise cut-outs. A full wrap of this body uses about 41 ft (12.5 m) of 60-inch cast film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

MINI Cabrio, third generation, factory photo
Factory color shown

2015–now Cabrio convertible (third generation)

2015–nowconvertible (2 doors)150.4 in (3,821 mm)

The glass roof on some third generation MINI Cabrio trims is not wrapped. The film ends at the roof rails, leaving the glass dark regardless of the film color. A sunroof means the roof film is cut around its opening, and a panoramic roof keeps that whole area bare. These details shape the wrap plan for the F57 body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

MINI Cabrio, second generation, factory photo
Factory color shown

2009–2015 Cabrio convertible (second generation)

2009–2015convertible (2 doors)143.9 in (3,655 mm) to 148.0 in (3,758 mm)

The 2010 restyling of the second generation MINI Cabrio changed bumpers and lights. Film cut for a pre-2010 car does not fit the restyled version, especially around the front bumper. Parking sensors are present on every trim, and some trims add fog lamps that need cut-outs. The body length spans 143.9 in (3,655 mm) to 148.0 in (3,758 mm), with about 39 ft (12 m) of film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

MINI Cabrio, first generation, factory photo
Factory color shown

2004–2008 Cabrio convertible (first generation)

2004–2008convertible (2 doors)143.1 in (3,635 mm)

Paint age matters on the first generation MINI Cabrio from 2004–2008. Panels may be original or repainted, so a test spot is done before a full wrap to check adhesion. The body is the shortest at 143.1 in (3,635 mm), taking about 39 ft (12 m) of film. Parking sensors on every trim still require film cut-outs.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Cabrio

A partial wrap on the MINI Cabrio covers the hood, mirror caps, or rear deck. Cabrio chrome delete applies black film to window trim and badges. Paint protection film (PPF) installs clear film on the front end to guard against stone chips. These jobs suit the car's small panels and reduce material compared to a full wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MINI Cabrio: body, cut-outs and film

The MINI Cabrio vinyl wrap follows a compact convertible body with two doors. Length ranges from 143.1 in (3,635 mm) on the first generation to 152.7 in (3,879 mm) on the fourth. Its short panels and curved surfaces call for precise cutting around the open top. The fabric roof itself is not wrapped, so the film area stays close to the figures given for each generation.

Cabrio wrap ideas start with the body lines, because the fabric top sets a clear boundary for the film. Every trim has parking sensors in the bumpers, and the installer cuts around each sensor. Cameras in the body also require cut-outs around each lens. Some trims of the third generation add fog lamps in the front bumper, which need their own openings.

How much vinyl to wrap a Cabrio changes between generations. The fourth and third generations take about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. The second and first generations take about 39 ft (12 m) of the same film. Chrome or patterned film adds roughly a third more material for every generation.

Questions about wrapping an MINI Cabrio

How much vinyl does it take to wrap an MINI Cabrio?

Yes, about 41 ft (12.5 m) of 60-inch (1.52 m) cast film wraps the newest MINI Cabrio. That figure covers the body panels and leaves the fabric top unwrapped. For chrome or patterned film, the estimate rises to about 54 ft (16.5 m).

Is the top of a Cabrio wrapped?

The fabric top of a MINI Cabrio is not wrapped. Film ends where the roof begins, and a folding hard top would be wrapped as separate panels. This keeps the roof's function and finish unchanged.

Can I wrap only the hood or the roof of a Cabrio?

Yes, a partial wrap covers the hood, mirror caps, or rear deck on a MINI Cabrio. A chrome delete covers window trim and badges with black film. These smaller jobs focus on high-wear areas without wrapping the whole car.

Is a Cabrio hard to wrap?

Yes, a MINI Cabrio adds work because of its size and sensors. At 143.1 in (3,635 mm) to 152.7 in (3,879 mm) long, the panels are short but curved, demanding precise film cuts. Every trim has parking sensors and cameras that need cut-outs around each sensor and lens.