Choosing a Delica D:3 wrapped in brown starts with selecting a finish, then a film, then a full or partial color change. Full coverage on this van needs about 66 ft (20 m) of cast film, more with chrome or patterns. Partial work like a roof or hood uses 2–6 m (7–20 ft) per panel. Matte and satin finishes hide surface ripples, while gloss shows body curves more strongly.
Factory paint condition on the Delica D:3 decides how much prep a wrap needs before seams are planned. Deep scratches or peeling clear coat must be repaired first so the film lies flat and seams stay tight. The sliding door tracks stay bare, which moves the cut lines to the body around them. A clean, smooth surface lets the installer place seams along natural edges and panel gaps.
A brown wrap on the Delica D:3 is removable when installed on intact factory paint. Removal leaves the paint as it was, so a color change is reversible at the end of a lease or sale. Hand washing with a soft mitt and pH-neutral soap avoids lifting edges on the door cut lines. Pressure washing near the sliding door tracks can push water under the film.


