Wraps by car

Mitsubishi Delica D:3 wrap

A Mitsubishi Delica D:3 wrap covers the whole 2011–2019 minivan, of which the catalog lists one generation. A full vinyl wrap of the newest body uses about 66 ft (20 m) of 60-inch (1.52 m) cast film. With chrome or patterned film the estimate rises to about 74 ft (22.5 m).

1generations20 mof film for a full wrap

Mitsubishi Delica D:3, first generation, factory photo
Mitsubishi Delica D:3, first generation. Factory color shown.

Mitsubishi Delica D:3 wrap colors and ideas

  • Delica D:3 black wrap
  • Delica D:3 white wrap
  • Delica D:3 gray wrap
  • Delica D:3 silver wrap
  • Delica D:3 red wrap
  • Delica D:3 blue wrap
  • Delica D:3 green wrap
  • Delica D:3 yellow wrap
  • Delica D:3 orange wrap
  • Delica D:3 purple wrap
  • Delica D:3 pink wrap
  • Delica D:3 teal wrap
  • Delica D:3 brown wrap
  • Delica D:3 gold wrap
  • Delica D:3 chrome wrap
  • Delica D:3 color shift wrap
  • Delica D:3 carbon fiber wrap
  • Delica D:3 camo and patterned wrap

How much vinyl to wrap a Mitsubishi Delica D:3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2019van (5 doors)173.2 in (4,400 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Delica D:3 wrap cost factors

A Delica D:3 wrap cost rests on the size of the minivan and the film chosen. The 173.2 in (4,400 mm) length and tall body require the full 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the material estimate to about 74 ft (22.5 m).

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (72.8 in (1,850 mm)): the roof is wrapped from a platform.

Delica D:3 wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Delica D:3, first generation, factory photo
Factory color shown

2011–2019 Delica D:3 van (first generation)

2011–2019van (5 doors)173.2 in (4,400 mm)

The first generation of the Mitsubishi Delica D:3 covers 2011–2019 and uses the MB20 body code. Its sliding side doors have tracks that stay bare and decide where the film is cut. Every wrap of this van follows those track lines on both sides.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (72.8 in (1,850 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Delica D:3

Partial wrap on a Delica D:3 can cover the roof, hood, or mirror caps. A chrome delete (bright trim covered with black film) can cover the window trim and badges. Paint protection film (PPF) in clear film can guard the front end without changing the color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi Delica D:3: body, cut-outs and film

A Mitsubishi Delica D:3 vinyl wrap follows the van's 173.2 in (4,400 mm) length and its single five-door body style. The tall 72.8 in (1,850 mm) body means the roof is wrapped from a platform. The sliding side doors stay on the car, but their tracks determine where the film is cut.

Delica D:3 wrap ideas start with the sliding door tracks, which remain bare on every wrap. The door handles, badges, and mirror caps are removed or cut out so the film sits flat. The window trims and roof rails also need careful cutting.

How much vinyl to wrap a Delica D:3 depends on the one generation sold from 2011 to 2019. The single body style, a five-door van, means film estimates stay the same across those years. A full wrap of the 173.2 in (4,400 mm) body needs about 66 ft (20 m) of 60-inch (1.52 m) film.

Questions about wrapping a Mitsubishi Delica D:3

How much vinyl does it take to wrap a Mitsubishi Delica D:3?

A full wrap of a Mitsubishi Delica D:3 takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 74 ft (22.5 m). Those figures cover the 173.2 in (4,400 mm) long van body from 2011–2019.

Are the sliding doors of a Delica D:3 wrapped?

Yes, the sliding doors of a Delica D:3 are wrapped. The door panels get the same film as the rest of the body. Only the tracks stay bare, and the film is cut along them.

Can I wrap only the hood or the roof of a Delica D:3?

Yes, you can wrap only the hood or the roof of a Delica D:3. A partial wrap can also cover just the mirror caps. These smaller jobs follow the same film cut lines as a full wrap.

Is a Delica D:3 hard to wrap?

A Delica D:3 is not the easiest van to wrap because of its tall 72.8 in (1,850 mm) body. The roof needs a platform for safe film application. The sliding door tracks also require careful cutting so the film ends cleanly at the bare track.