Wraps by car

Mitsubishi Pajero Sport wrap

This page covers the Mitsubishi Pajero Sport wrap in cast vinyl film, with data for three generations of the SUV and the film a full wrap of the newest body takes. The newest body is the third generation, built from 2016 onward and restyled in 2019. A full wrap of that body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Use this guide to plan film cuts, choose a partial wrap, and understand what a wrap involves on this car.

3generations19.5 mof film for a full wrap

Mitsubishi Pajero Sport, third generation, factory photo
Mitsubishi Pajero Sport, third generation. Factory color shown.

Mitsubishi Pajero Sport wrap colors and ideas

  • Pajero Sport black wrap
  • Pajero Sport white wrap
  • Pajero Sport gray wrap
  • Pajero Sport silver wrap
  • Pajero Sport red wrap
  • Pajero Sport blue wrap
  • Pajero Sport green wrap
  • Pajero Sport yellow wrap
  • Pajero Sport orange wrap
  • Pajero Sport purple wrap
  • Pajero Sport pink wrap
  • Pajero Sport teal wrap
  • Pajero Sport brown wrap
  • Pajero Sport gold wrap
  • Pajero Sport chrome wrap
  • Pajero Sport color shift wrap
  • Pajero Sport carbon fiber wrap
  • Pajero Sport camo and patterned wrap

How much vinyl to wrap a Mitsubishi Pajero Sport

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowSUV (5 doors)188.4 in (4,785 mm) to 190.0 in (4,825 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
2008–2017SUV (5 doors)184.8 in (4,695 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
1996–2009SUV (5 doors)181.5 in (4,610 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Pajero Sport wrap cost factors

Pajero Sport wrap cost depends on the generation of the car, the amount of film, and the work of preparing the body. The newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film, while the first generation takes about 61 ft (18.5 m), so a newer car costs more in material. Every trim has roof rails and fog lamps that add labor for removal or cutting, and some trims have parking sensors or cameras that require extra care. The condition of the paint also affects the cost, especially on the oldest generation where panels may be repainted.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

Pajero Sport wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Pajero Sport, third generation, factory photo
Factory color shown

2016–now Pajero Sport SUV (third generation)

2016–nowSUV (5 doors)188.4 in (4,785 mm) to 190.0 in (4,825 mm)

The third generation of the Mitsubishi Pajero Sport was introduced in 2016 and restyled in 2019. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. This body is the longest of the three, measuring 188.4 in (4,785 mm) to 190.0 in (4,825 mm), and takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. The roof rails on every trim come off or the film is cut along them.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Mitsubishi Pajero Sport, second generation, factory photo
Factory color shown

2008–2017 Pajero Sport SUV (second generation)

2008–2017SUV (5 doors)184.8 in (4,695 mm)

The second generation of the Mitsubishi Pajero Sport was produced from 2008 to 2017, with a restyling in 2013. Its years overlap with the newer body from 2016 to 2017, so the owner of a car from those years checks which body it is before ordering film. This body is 184.8 in (4,695 mm) long and takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Some trims have roof rails and bright moldings, so those parts need attention during the wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Mitsubishi Pajero Sport, first generation, factory photo
Factory color shown

1996–2009 Pajero Sport SUV (first generation)

1996–2009SUV (5 doors)181.5 in (4,610 mm)

The first generation of the Mitsubishi Pajero Sport was built from 1996 to 2009, with a restyling in 2004. On a car of these years panels may be original or repainted, so a test spot comes before a full wrap to check paint adhesion. This body is the shortest at 181.5 in (4,610 mm) and takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Some trims have fog lamps in the front bumper, so cut-outs in the bumper film are needed on those cars.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Pajero Sport

A partial wrap on a Pajero Sport includes the roof, hood, or mirror caps, and a chrome delete covers window trim, decorative moldings, and badges. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done in stages. The roof of this SUV is tall, so even a roof wrap needs a platform for safe access.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi Pajero Sport: body, cut-outs and film

The Mitsubishi Pajero Sport vinyl wrap follows the body of a five-door SUV with a large surface area in every generation. The third generation measures 188.4 in (4,785 mm) to 190.0 in (4,825 mm) long, while earlier bodies are slightly shorter but still need full-size film rolls. A tall body of 72.2 in (1,835 mm) means the roof is wrapped from a platform, not from the ground. The tailgate includes the rear glass, so the film ends at the edge of the glass on every version.

Pajero Sport wrap ideas must account for parts that need cut-outs or removal. Every trim has roof rails and fog lamps, so the installer either removes the rails or cuts the film along them, and cuts around each fog lamp in the front bumper. Some trims add parking sensors in the bumpers or cameras in the body, and the film is cut around each sensor or lens. Bright decorative moldings stay bright next to the film unless a chrome delete covers them.

To know how much vinyl to wrap a Pajero Sport, compare the film estimates of the three generations. The newest body needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film, the second generation about 62 ft (19 m), and the first about 61 ft (18.5 m). Chrome or patterned film takes more material on each body: about 80 ft (24.5 m), 79 ft (24 m), and 70 ft (21.5 m) respectively. The difference comes from the body length and the extra film needed for matching patterns.

Questions about wrapping a Mitsubishi Pajero Sport

How much vinyl does it take to wrap a Mitsubishi Pajero Sport?

A full wrap of the newest Mitsubishi Pajero Sport takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. This figure comes from the film estimate for the third generation, built from 2016 onward. Chrome or patterned film takes more material, about 80 ft (24.5 m), because the pattern must be matched across panels. Earlier generations take slightly less film, as noted on this page.

Which years of the Pajero Sport take the same film cuts?

The third generation, from 2016 onward, uses the same film cuts for 2016 through 2018 and then new cuts after the 2019 restyling. The second generation, from 2008 to 2017, was restyled in 2013, so cuts differ before and after that year. The first generation, from 1996 to 2009, was restyled in 2004, and cuts differ between the earlier and later versions. For 2016 and 2017 cars, check which body you have because the second and third generations overlap.

Can I wrap only the hood or the roof of a Pajero Sport?

Yes, you can wrap only the hood or the roof of a Pajero Sport, and mirror caps are another option for a partial wrap. A chrome delete covers window trim, decorative moldings, and badges, and paint protection film can be applied to the front end. The roof is tall, so wrapping it requires a platform on every generation of this SUV. Partial jobs use less film than a full wrap and can be planned separately.

Is a Pajero Sport hard to wrap?

A Pajero Sport is not hard to wrap, but it has some parts that add work. Every trim has roof rails and fog lamps, and on the newest body the roof is 72.2 in (1,835 mm) tall, so a platform is needed. Some trims have parking sensors in the bumpers and cameras in the body, and the film must be cut around each one. The tailgate includes the rear glass, so the film ends at the edge of the glass on every generation.