Wraps by car

Mitsubishi Space Star wrap

The Mitsubishi Space Star wrap guide covers both generations of this subcompact car. A full vinyl wrap of the newest hatchback body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. The first-generation van body needs about 59 ft (18 m) of the same film width.

2generations15 mof film for a full wrap

Mitsubishi Space Star, second generation, factory photo
Mitsubishi Space Star, second generation. Factory color shown.

Mitsubishi Space Star wrap colors and ideas

  • Space Star black wrap
  • Space Star white wrap
  • Space Star gray wrap
  • Space Star silver wrap
  • Space Star red wrap
  • Space Star blue wrap
  • Space Star green wrap
  • Space Star yellow wrap
  • Space Star orange wrap
  • Space Star purple wrap
  • Space Star pink wrap
  • Space Star teal wrap
  • Space Star brown wrap
  • Space Star gold wrap
  • Space Star chrome wrap
  • Space Star color shift wrap
  • Space Star carbon fiber wrap
  • Space Star camo and patterned wrap

How much vinyl to wrap a Mitsubishi Space Star

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowhatchback (5 doors)146.1 in (3,710 mm) to 151.4 in (3,845 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1998–2005van (5 doors)158.7 in (4,030 mm) to 159.4 in (4,050 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Space Star wrap cost factors

Space Star wrap cost is set by the vehicle size, the film type, and the amount of disassembly. The hatchback body needs about 49 ft (15 m) of cast film, while the van needs about 59 ft (18 m). Chrome or patterned film raises the film amount to about 57 ft (17.5 m) or 67 ft (20.5 m). Extra labor for cut-outs around fog lamps or sliding door tracks can also change the total.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2016, 2019: bumpers and lights differ between the versions, and so do the film cuts.

Space Star wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Space Star, second generation, factory photo
Factory color shown

2012–now Space Star hatchback (second generation)

2012–nowhatchback (5 doors)146.1 in (3,710 mm) to 151.4 in (3,845 mm)

The second-generation Space Star was restyled in 2016 and 2019. Those updates changed the bumpers and lights, so film cut for one version does not fit the other. When you order pre-cut film or a kit, you need to match it to the correct front and rear bumper shape.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mitsubishi Space Star, first generation, factory photo
Factory color shown

1998–2005 Space Star van (first generation)

1998–2005van (5 doors)158.7 in (4,030 mm) to 159.4 in (4,050 mm)

The first-generation Space Star was produced from 1998 to 2005, with a restyling in 2002. On a car of these years, panels may be original or repainted. A test spot on the paint comes before a full wrap to check how the film adheres.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Space Star

A partial wrap on a Space Star can cover the roof, hood, or mirror caps. Space Star chrome delete usually means wrapping the window trim and badges with black film. Paint protection film (PPF) is also an option: clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi Space Star: body, cut-outs and film

The Mitsubishi Space Star vinyl wrap is shaped by two quite different body styles. The second generation from 2012 is a five-door hatchback with a length from 146.1 in (3,710 mm) to 151.4 in (3,845 mm). Its compact shape and short overhangs make the film cuts straightforward around the bumpers. The first generation from 1998 is a five-door van, longer at 158.7 in (4,030 mm) to 159.4 in (4,050 mm), with more flat side area.

Space Star wrap ideas must account for a few factory details. The rear tailgate carries the glass all the way to its edges, so the film ends neatly at the glass line. On some trims the front bumper has fog lamps, which means cut-outs in the bumper film. The first-generation van has sliding side doors, and the film is cut along the door tracks, which stay bare.

How much vinyl to wrap a Space Star depends on which generation you have. The current hatchback uses about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full color change. The older van takes about 59 ft (18 m) of the same film. A chrome or patterned film adds roughly 15 percent to both figures.

Questions about wrapping a Mitsubishi Space Star

How much vinyl does it take to wrap a Mitsubishi Space Star?

A Mitsubishi Space Star takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap of the newest hatchback body. The first-generation van needs about 59 ft (18 m) of the same film width. Chrome or patterned film adds roughly 15 percent more material.

Which years of the Space Star take the same film cuts?

The years that take the same film cuts are 2012–2015, 2016–2018, and 2019–now for the second generation. The first generation is split into 1998–2001 and 2002–2005 because of the 2002 restyling.

Can I wrap only the hood or the roof of a Space Star?

Yes, you can wrap only the hood or the roof of a Space Star. A partial wrap can also cover the mirror caps alone, or you can choose a chrome delete for the window trim and badges. Paint protection film on the front end is another smaller job.

Is a Space Star hard to wrap?

A Space Star is not especially hard to wrap, but a few details add work. On the hatchback, the tailgate glass reaches the edges, so the film must be trimmed exactly along the glass. Some trims have fog lamps in the front bumper that need cut-outs. The van's sliding side doors add labor because the film is cut along the door tracks.