Wraps by car

Mitsubishi Lancer wrap

The Mitsubishi Lancer wrap page covers ten generations of this compact car, from 1985 to 2017. A full wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl wrap. The tenth generation spans 2007–2017 and includes hatchback and sedan styles.

10generations17.5 mof film for a full wrap

Mitsubishi Lancer, tenth generation, factory photo
Mitsubishi Lancer, tenth generation. Factory color shown.

Mitsubishi Lancer wrap colors and ideas

  • Lancer black wrap
  • Lancer white wrap
  • Lancer gray wrap
  • Lancer silver wrap
  • Lancer red wrap
  • Lancer blue wrap
  • Lancer green wrap
  • Lancer yellow wrap
  • Lancer orange wrap
  • Lancer purple wrap
  • Lancer pink wrap
  • Lancer teal wrap
  • Lancer brown wrap
  • Lancer gold wrap
  • Lancer chrome wrap
  • Lancer color shift wrap
  • Lancer carbon fiber wrap
  • Lancer camo and patterned wrap

How much vinyl to wrap a Mitsubishi Lancer

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2017hatchback, sedan (4 or 5 doors)179.9 in (4,570 mm) to 182.7 in (4,640 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2003–2010sedan, wagon (4 or 5 doors)176.4 in (4,480 mm) to 178.5 in (4,535 mm)about 54 ft (16.5 m) for the wagon to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)
1995–2003sedan (4 doors)168.9 in (4,290 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1991–2000sedan, wagon (4 or 5 doors)169.1 in (4,295 mm)about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
1985–1992sedan, wagon (4 or 5 doors)168.1 in (4,270 mm) to 168.3 in (4,275 mm)about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
1983–1991hatchback, sedan (4 or 5 doors)166.7 in (4,235 mm)about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)
1982–1983sedan, wagon (4 or 5 doors)161.9 in (4,113 mm) to 166.5 in (4,230 mm)about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)
1979–1987sedan (4 doors)153.1 in (3,890 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1976–1979coupe, sedan, wagon (2 or 4 or 5 doors)166.5 in (4,230 mm)about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)
1973–1981coupe, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)156.1 in (3,965 mm) to 163.8 in (4,160 mm)about 43 ft (13 m) for the coupe to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Lancer wrap cost factors

Lancer wrap cost depends on the generation, body style, and film choice. A tenth-generation car needs about 57 ft (17.5 m) of cast film for a full wrap, while an eighth-generation sedan needs about 48 ft (14.5 m). Chrome or patterned films add about 20% more material.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2011, 2016: bumpers and lights differ between the versions, and so do the film cuts.

Lancer wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Lancer, tenth generation, factory photo
Factory color shown

2007–2017 Lancer hatchback, sedan (tenth generation)

2007–2017hatchback, sedan (4 or 5 doors)179.9 in (4,570 mm) to 182.7 in (4,640 mm)

The tenth generation Mitsubishi Lancer was restyled in 2011 and again in 2016, changing bumpers and lights. Film cut for one version does not fit the other, so the production year and trim matter. Owners should check the build date before ordering pre-cut film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Mitsubishi Lancer, ninth generation, factory photo
Factory color shown

2003–2010 Lancer sedan, wagon (ninth generation)

2003–2010sedan, wagon (4 or 5 doors)176.4 in (4,480 mm) to 178.5 in (4,535 mm)

The ninth generation Mitsubishi Lancer covers 2003–2010, overlapping with the tenth generation from 2007 to 2010. A car from those overlapping years could be either body, so the owner checks the shape. The film amount differs slightly between the sedan and wagon.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) for the wagon to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Mitsubishi Lancer, eighth generation, factory photo
Factory color shown

1995–2003 Lancer sedan (eighth generation)

1995–2003sedan (4 doors)168.9 in (4,290 mm)

The eighth generation Mitsubishi Lancer ran from 1995 to 2003 with a restyling in 1997. Paint age on a car of these years may be original or repainted, so a test spot comes before a full wrap. A wrap installer checks adhesion on each panel first.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Mitsubishi Lancer, seventh generation, factory photo
Factory color shown

1991–2000 Lancer sedan, wagon (seventh generation)

1991–2000sedan, wagon (4 or 5 doors)169.1 in (4,295 mm)

The seventh generation Mitsubishi Lancer came as a sedan or wagon from 1991 to 2000. The body style decides the panel plan and film amount. A wagon wrap takes more film than a sedan wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Mitsubishi Lancer, sixth generation, factory photo
Factory color shown

1985–1992 Lancer sedan, wagon (sixth generation)

1985–1992sedan, wagon (4 or 5 doors)168.1 in (4,270 mm) to 168.3 in (4,275 mm)

The sixth generation Mitsubishi Lancer from 1985 to 1992 is smaller than later generations at 168.1 in (4,270 mm) to 168.3 in (4,275 mm). The sedan needs about 48 ft (14.5 m) of film and the wagon about 52 ft (16 m). Fewer panels on the sedan mean a faster layout.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Mitsubishi Lancer, fifth generation, factory photo
Factory color shown

1983–1991 Lancer hatchback, sedan (fifth generation)

1983–1991hatchback, sedan (4 or 5 doors)166.7 in (4,235 mm)

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Mitsubishi Lancer, fourth generation, factory photo
Factory color shown

1982–1983 Lancer sedan, wagon (fourth generation)

1982–1983sedan, wagon (4 or 5 doors)161.9 in (4,113 mm) to 166.5 in (4,230 mm)

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Mitsubishi Lancer, third generation, factory photo
Factory color shown

1979–1987 Lancer sedan (third generation)

1979–1987sedan (4 doors)153.1 in (3,890 mm)

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Mitsubishi Lancer, second generation, factory photo
Factory color shown

1976–1979 Lancer coupe, sedan, wagon (second generation)

1976–1979coupe, sedan, wagon (2 or 4 or 5 doors)166.5 in (4,230 mm)

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Mitsubishi Lancer, first generation, factory photo
Factory color shown

1973–1981 Lancer coupe, hatchback, sedan, wagon (first generation)

1973–1981coupe, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)156.1 in (3,965 mm) to 163.8 in (4,160 mm)

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the coupe to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Lancer

Lancer chrome delete covers the window trim and badges with black film. Partial wrap jobs include the roof, hood, and mirror caps. Paint protection film (PPF) on the front end is a clear option.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi Lancer: body, cut-outs and film

The Mitsubishi Lancer vinyl wrap is shaped by its body styles and sizes. The newest generation ranges from 179.9 in (4,570 mm) to 182.7 in (4,640 mm), so a wrap uses full rolls of film with careful planning. Hatchback and sedan bodies share similar panel counts but differ at the rear.

Lancer wrap ideas start with the parts that need cut-outs or removal. On the newest body, some trims have a sunroof, parking sensors, or fog lamps that require precise cutting. A tailgate with the rear glass in it means the film ends at the glass edge.

How much vinyl to wrap a Lancer changes between generations. The ninth generation takes about 54 ft (16.5 m) for the wagon to 56 ft (17 m) for the sedan, while the eighth generation needs about 48 ft (14.5 m). The seventh and sixth generations run from 48 ft (14.5 m) to 52 ft (16 m) depending on body style.

Questions about wrapping a Mitsubishi Lancer

How much vinyl does it take to wrap a Mitsubishi Lancer?

A Mitsubishi Lancer takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap on the newest body. Chrome or patterned film needs about 69 ft (21 m).

Can the roof of a Lancer be wrapped?

Yes, the roof of a Lancer can be wrapped. Some trims have a sunroof, so the film is cut around its opening.

Which years of the Lancer take the same film cuts?

For the tenth generation, 2007–2017 cars share the same body from 2011 onwards after the restyling. Cars from 2007–2010 match the ninth generation if they are the older shape.

Which Lancer body takes more film?

The wagon body takes more film than the sedan in the same generation. For the ninth generation, the wagon needs about 54 ft (16.5 m) and the sedan 56 ft (17 m).