Wraps by car

Mitsubishi Destinator wrap

The Mitsubishi Destinator wrap page covers the first generation of this SUV, produced from 2025 to now. A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. The catalog includes one generation of the Mitsubishi Destinator.

1generations19 mof film for a full wrap

Mitsubishi Destinator, first generation, factory photo
Mitsubishi Destinator, first generation. Factory color shown.

Mitsubishi Destinator wrap colors and ideas

  • Destinator black wrap
  • Destinator white wrap
  • Destinator gray wrap
  • Destinator silver wrap
  • Destinator red wrap
  • Destinator blue wrap
  • Destinator green wrap
  • Destinator yellow wrap
  • Destinator orange wrap
  • Destinator purple wrap
  • Destinator pink wrap
  • Destinator teal wrap
  • Destinator brown wrap
  • Destinator gold wrap
  • Destinator chrome wrap
  • Destinator color shift wrap
  • Destinator carbon fiber wrap
  • Destinator camo and patterned wrap

How much vinyl to wrap a Mitsubishi Destinator

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowSUV (5 doors)184.3 in (4,680 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Destinator wrap cost factors

Destinator wrap cost depends on the size of the body, the film type, and the labor for its tall roof. The SUV is 184.3 in (4,680 mm) long and 70.1 in (1,780 mm) high, so installers work from a platform. A chrome or patterned film uses about 79 ft (24 m) instead of 62 ft (19 m), which raises material cost. No figures of money are given here, but larger film use and extra time increase the price.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (70.1 in (1,780 mm)): the roof is wrapped from a platform.

Destinator wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Destinator, first generation, factory photo
Factory color shown

2025–now Destinator SUV (first generation)

2025–nowSUV (5 doors)184.3 in (4,680 mm)

The first generation Mitsubishi Destinator has a height of 70.1 in (1,780 mm), so the roof is wrapped from a platform and takes more time. This generation is the only one covered, produced from 2025 to now. The tall body adds labor compared with lower SUVs, but the five-door layout is straightforward.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (70.1 in (1,780 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a Destinator

You can wrap just the roof, hood, or mirror caps as a partial wrap on a Destinator. Chrome delete covers window trim and badges. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs give you a change without wrapping the entire vehicle.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi Destinator: body, cut-outs and film

The Mitsubishi Destinator vinyl wrap is shaped by its SUV body style with five doors and a length of 184.3 in (4,680 mm). A tall body at 70.1 in (1,780 mm) means the roof is wrapped from a platform. The five-door layout adds extra panels around each door and the tailgate, using more film than a smaller car.

Destinator wrap ideas must account for a tailgate with the rear glass in it, where the film ends at the edge of the glass. The tall body requires a platform for the roof, and the mirror caps may be removed for cleaner edges. Door handles and badges are taken off or cut around for a precise finish.

To find how much vinyl to wrap a Destinator, you start with about 62 ft (19 m) of 60-inch (1.52 m) cast film for the first generation. A chrome or patterned finish needs more material, around 79 ft (24 m), because pattern matching adds waste. There is only one generation in this catalog, so film estimates stay the same.

Questions about wrapping a Mitsubishi Destinator

How much vinyl does it take to wrap a Mitsubishi Destinator?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Mitsubishi Destinator. The estimate comes from the first generation SUV, which is the only generation in this catalog. A chrome or patterned film would need about 79 ft (24 m).

Can I wrap only the hood or the roof of a Destinator?

Yes, you can wrap only the hood or the roof of a Destinator. The partial wrap option includes the roof, hood, and mirror caps. You might also choose chrome delete or paint protection film for smaller areas.

Is a Destinator hard to wrap?

A Destinator is not especially hard to wrap, but its tall body adds work. The roof is wrapped from a platform because the vehicle is 70.1 in (1,780 mm) high. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

How many generations of the Destinator does this page cover?

This page covers one generation of the Destinator. The catalog includes the first generation, produced from 2025 to now. No earlier generations are listed.