Wraps by car

Mitsubishi Outlander wrap

The Mitsubishi Outlander wrap page covers the four generations of this SUV from 2002 to now. A vinyl wrap protects the paint and changes the color of the whole body. The newest fourth-generation body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film for a full wrap. That estimate rises to about 74 ft (22.5 m) when the film is chrome or patterned.

4generations19 mof film for a full wrap

Mitsubishi Outlander, fourth generation, factory photo
Mitsubishi Outlander, fourth generation. Factory color shown.

Mitsubishi Outlander wrap colors and ideas

  • Outlander black wrap
  • Outlander white wrap
  • Outlander gray wrap
  • Outlander silver wrap
  • Outlander red wrap
  • Outlander blue wrap
  • Outlander green wrap
  • Outlander yellow wrap
  • Outlander orange wrap
  • Outlander purple wrap
  • Outlander pink wrap
  • Outlander teal wrap
  • Outlander brown wrap
  • Outlander gold wrap
  • Outlander chrome wrap
  • Outlander color shift wrap
  • Outlander carbon fiber wrap
  • Outlander camo and patterned wrap

How much vinyl to wrap a Mitsubishi Outlander

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)185.4 in (4,709 mm) to 185.8 in (4,719 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
2012–2022SUV (5 doors)183.3 in (4,655 mm) to 184.8 in (4,695 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2005–2013SUV (5 doors)182.7 in (4,640 mm) to 183.7 in (4,665 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2002–2009SUV (5 doors)178.9 in (4,545 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Outlander wrap cost factors

Outlander wrap cost depends on the size of the body, the number of cut-outs, and the type of film. The fourth-generation Outlander is up to 185.8 in (4,719 mm) long and has up to 7 cut-outs for sensors and cameras on some trims. A chrome delete covers the bright trim and adds separate pieces to the job. The first-generation car is 178.9 in (4,545 mm) long and has fewer cut-outs, so the labor is lighter.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Outlander wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Outlander, fourth generation, factory photo
Factory color shown

2021–now Outlander SUV (fourth generation)

2021–nowSUV (5 doors)185.4 in (4,709 mm) to 185.8 in (4,719 mm)

The fourth-generation Mitsubishi Outlander has a glass roof on some trims, and that glass is not wrapped. The roof film ends at the edge of the glass roof, leaving the glass dark whatever the color of the film. The roof rails come off before the roof is wrapped, or the film is cut along them. This body was restyled in 2024, so the bumpers differ from the earlier fourth-generation cars.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Mitsubishi Outlander, third generation, factory photo
Factory color shown

2012–2022 Outlander SUV (third generation)

2012–2022SUV (5 doors)183.3 in (4,655 mm) to 184.8 in (4,695 mm)

The third-generation Mitsubishi Outlander covers production years 2012 to 2022. These years overlap with the fourth generation from 2021 to 2022, so the owner of a car from those two years must check which body it is. The third-generation car was restyled in 2014, 2015, and 2018, so the film cuts differ between those versions. The body is 183.3 in (4,655 mm) to 184.8 in (4,695 mm) long.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Mitsubishi Outlander, second generation, factory photo
Factory color shown

2005–2013 Outlander SUV (second generation)

2005–2013SUV (5 doors)182.7 in (4,640 mm) to 183.7 in (4,665 mm)

The second-generation Mitsubishi Outlander covers production years 2005 to 2013. It was restyled in 2010, and the bumpers and lights changed, so film cut for one version does not fit the other. The body is 182.7 in (4,640 mm) to 183.7 in (4,665 mm) long and takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Some trims have parking sensors in the bumpers, and the film is cut around each sensor.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Mitsubishi Outlander, first generation, factory photo
Factory color shown

2002–2009 Outlander SUV (first generation)

2002–2009SUV (5 doors)178.9 in (4,545 mm)

The first-generation Mitsubishi Outlander covers production years 2002 to 2009. On a car of these years the paint may be original or repainted, so a test spot on a panel comes before a full wrap. The body is 178.9 in (4,545 mm) long and takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Every trim has fog lamps in the front bumper, so cut-outs in the bumper film are necessary.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an Outlander

A Mitsubishi Outlander partial wrap can cover the hood, mirror caps, and roof on cars without the glass panel. An Outlander chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less material than a full wrap but still follow the body lines and cut-outs.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi Outlander: body, cut-outs and film

The Mitsubishi Outlander vinyl wrap fits one five-door SUV body in every generation. The newest body is 185.4 in (4,709 mm) to 185.8 in (4,719 mm) long, so the roof and tailgate are large surfaces. The first-generation car is smaller at 178.9 in (4,545 mm) and takes the least film. A full wrap covers every painted panel including the door jambs.

Outlander wrap ideas include color change film on the body and black film on the bright trim. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Every generation has a tailgate with the rear glass in it, so the film ends at the edge of the glass. Some trims have cameras in the body, and the film is cut around each lens.

How much vinyl to wrap an Outlander depends on the generation and the chosen film. The fourth-generation body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film, while the first generation takes about 59 ft (18 m). Chrome or patterned film adds about 8–12 ft (2.5–3.5 m) to each estimate. The restyling years changed the bumpers, so a 2024 fourth-generation car needs slightly different cuts than a 2022 model.

Questions about wrapping a Mitsubishi Outlander

How much vinyl does it take to wrap a Mitsubishi Outlander?

Yes, a Mitsubishi Outlander wrap takes about 62 ft (19 m) of 60-inch (1.52 m) cast film for the newest fourth-generation body. Chrome or patterned film needs about 74 ft (22.5 m) because the pattern must be matched at the seams. The first-generation body takes about 59 ft (18 m) because it is smaller. These figures cover a full wrap of all painted surfaces.

Can the roof of an Outlander be wrapped?

Yes, the roof of an Outlander can be wrapped if it is a painted steel or aluminum panel. On some trims the roof has a panoramic glass roof, and that glass is not wrapped, so the film ends at the roof rails. Some trims have a sunroof, and the roof film is cut around its opening. The roof rails must come off before the roof is wrapped, or the film is cut along them.

Which years of the Outlander take the same film cuts?

The same film cuts fit an Outlander within one generation, but not across generations. The fourth-generation Outlander covers 2021 to now, and it was restyled in 2024, so the 2024 and later body has different bumper cuts. The third-generation Outlander covers 2012 to 2022, with restyles in 2014, 2015, and 2018, so each restyle changes the cuts. The second-generation Outlander covers 2005 to 2013, and the 2010 restyle changed the bumpers and lights.

Can I wrap only the hood or the roof of an Outlander?

Yes, you can wrap only the hood or the roof of an Outlander as a partial wrap. The hood, mirror caps, and roof on cars without the glass panel are typical partial wrap areas. A chrome delete covers the window trim and badges, and paint protection film (PPF) is a clear film on the front end. These jobs are smaller than a full wrap and use less material.