Wraps by car

Mitsubishi eK Custom wrap

The Mitsubishi eK Custom wrap covers this mini van from 2013 through 2019. Mitsubishi produced one generation of the eK Custom, with a styling update in 2015. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. The page below explains the body details, the film estimate, and the wrap options.

1generations15 mof film for a full wrap

Mitsubishi eK Custom, first generation, factory photo
Mitsubishi eK Custom, first generation. Factory color shown.

Mitsubishi eK Custom wrap colors and ideas

  • eK Custom black wrap
  • eK Custom white wrap
  • eK Custom gray wrap
  • eK Custom silver wrap
  • eK Custom red wrap
  • eK Custom blue wrap
  • eK Custom green wrap
  • eK Custom yellow wrap
  • eK Custom orange wrap
  • eK Custom purple wrap
  • eK Custom pink wrap
  • eK Custom teal wrap
  • eK Custom brown wrap
  • eK Custom gold wrap
  • eK Custom chrome wrap
  • eK Custom color shift wrap
  • eK Custom carbon fiber wrap
  • eK Custom camo and patterned wrap

How much vinyl to wrap a Mitsubishi eK Custom

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2019van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

eK Custom wrap cost factors

The eK Custom wrap cost depends on the size of the job and the film type. A full wrap needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, or about 57 ft (17.5 m) of chrome or patterned film. The sliding doors and the short 133.7 in (3,395 mm) body mean the installer spends extra time on the tracks. The final cost also changes with the wrap finish and how much of the van is covered.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2015: bumpers and lights differ between the versions, and so do the film cuts.

eK Custom wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi eK Custom, first generation, factory photo
Factory color shown

2013–2019 eK Custom van (first generation)

2013–2019van (5 doors)133.7 in (3,395 mm)

The first generation eK Custom (2013–2019) has a five-door van body. The sliding side doors are the main point for the wrap: the tracks stay bare and decide where the film is cut. The film is trimmed along the track edge so the door rollers move freely. A 2015 restyle changed the front and rear lights but not the door design.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an eK Custom

A partial wrap on the eK Custom covers the roof, the hood, or the mirror caps. An eK Custom chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) goes on the front end as a clear layer. These smaller jobs let you change the look without wrapping the whole van.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi eK Custom: body, cut-outs and film

The Mitsubishi eK Custom vinyl wrap works with a compact five-door van body. The vehicle is 133.7 in (3,395 mm) long, so the film is cut to fit short panels and a tall roof. The sliding side doors mean the tracks stay bare and decide where the film is cut. This keeps the wrap secure and lets the doors open normally.

A wrap on this van has several cut-outs and removals. The door handles, mirrors, badges, and the sliding door tracks need precise trimming. The rear wiper and the tailgate trim come off for a clean edge. Leave the door tracks bare so the film does not peel or jam the rollers. Good eK Custom wrap ideas use these cuts as natural break lines.

To work out how much vinyl to wrap an eK Custom, use the B11W body. The base estimate is about 49 ft (15 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, order about 57 ft (17.5 m). The 2015 restyle did not change the body size, so both versions take the same amount.

Questions about wrapping a Mitsubishi eK Custom

How much vinyl does it take to wrap a Mitsubishi eK Custom?

A Mitsubishi eK Custom needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. The estimate is based on the newest body, the 2013–2019 van. Chrome or patterned film raises the amount to about 57 ft (17.5 m).

Are the sliding doors of an eK Custom wrapped?

Yes, the sliding doors of an eK Custom are wrapped, but not the tracks. The film is cut along the track edges so the rollers stay uncovered. This lets the doors slide normally and keeps the film from peeling.

Which years of the eK Custom take the same film cuts?

The eK Custom years 2013 to 2019 take the same film cuts. The body did not change size in the 2015 restyle. The sliding door tracks and the main panels are the same on both versions.

Can I wrap only the hood or the roof of an eK Custom?

Yes, you can wrap only the hood or the roof of an eK Custom. A partial wrap covers those panels or the mirror caps. The front end can also get paint protection film (PPF) instead of a color wrap.