Wraps by car

Mitsubishi Pajero wrap

The Mitsubishi Pajero wrap page covers four generations of this SUV and the vinyl wrap film that fits each body. The newest body is the fourth generation, produced from 2006 to 2021. A full wrap of that body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 76 ft (23 m).

4generations18 mof film for a full wrap

Mitsubishi Pajero, fourth generation, factory photo
Mitsubishi Pajero, fourth generation. Factory color shown.

Mitsubishi Pajero wrap colors and ideas

  • Pajero black wrap
  • Pajero white wrap
  • Pajero gray wrap
  • Pajero silver wrap
  • Pajero red wrap
  • Pajero blue wrap
  • Pajero green wrap
  • Pajero yellow wrap
  • Pajero orange wrap
  • Pajero purple wrap
  • Pajero pink wrap
  • Pajero teal wrap
  • Pajero brown wrap
  • Pajero gold wrap
  • Pajero chrome wrap
  • Pajero color shift wrap
  • Pajero carbon fiber wrap
  • Pajero camo and patterned wrap

How much vinyl to wrap a Mitsubishi Pajero

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2021SUV (3 or 5 doors)172.6 in (4,385 mm) to 192.9 in (4,900 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)
1999–2007SUV (3 or 5 doors)167.5 in (4,255 mm) to 189.4 in (4,810 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1991–2000SUV, open-top SUV (3 or 5 doors)160.4 in (4,075 mm) to 186.0 in (4,725 mm)about 46 ft (14 m) for the open-top SUV to 62 ft (19 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m)
1981–1991SUV, open-top SUV (3 or 5 doors)157.3 in (3,995 mm) to 183.1 in (4,650 mm)about 44 ft (13.5 m) for the open-top SUV to 61 ft (18.5 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)

Pajero wrap cost factors

Pajero wrap cost depends on the size of the body and the time spent on cut-outs and removed parts. The largest SUV body is 192.9 in (4,900 mm) long and the smallest is 157.3 in (3,995 mm), which changes film use. Chrome delete adds cost on trims with bright decorative moldings, and roof rails take extra labor. The open-top SUV of the early generations has a fabric top, so the cost of wrapping the hard panels is lower than a full SUV.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (74.8 in (1,900 mm)): the roof is wrapped from a platform.
  • Restyled in 2011, 2014: bumpers and lights differ between the versions, and so do the film cuts.

Pajero wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Pajero, fourth generation, factory photo
Factory color shown

2006–2021 Pajero SUV (fourth generation)

2006–2021SUV (3 or 5 doors)172.6 in (4,385 mm) to 192.9 in (4,900 mm)

The restyling in 2011 and 2014 changed the bumpers and lights of the fourth-generation Mitsubishi Pajero. Film cut for one version of this body does not fit the other, because the panel shapes around the lights and lower bumper are different. The body length ranges from 172.6 in (4,385 mm) to 192.9 in (4,900 mm). You also find roof rails or a sunroof on some trims, and the film is cut or the rails come off before the roof is wrapped.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (74.8 in (1,900 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Mitsubishi Pajero, third generation, factory photo
Factory color shown

1999–2007 Pajero SUV (third generation)

1999–2007SUV (3 or 5 doors)167.5 in (4,255 mm) to 189.4 in (4,810 mm)

The third-generation Mitsubishi Pajero covers cars built from 1999 to 2007, and its years overlap with the newer body from 2006 to 2007. The owner of a car from those two years checks which body it is before ordering film. This body is 167.5 in (4,255 mm) to 189.4 in (4,810 mm) long and 73.0 in (1,855 mm) tall. Some trims have a sunroof or roof rails, and the film is cut around them or the rails are removed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

A tall body (73.0 in (1,855 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Mitsubishi Pajero, second generation, factory photo
Factory color shown

1991–2000 Pajero SUV, open-top SUV (second generation)

1991–2000SUV, open-top SUV (3 or 5 doors)160.4 in (4,075 mm) to 186.0 in (4,725 mm)

The open-top SUV of the second-generation Mitsubishi Pajero has a fabric top that is not wrapped, and the film ends where the top begins. A folding hard top on the open-top SUV is wrapped as panels of its own. The SUV body takes about 46 ft (14 m) to 62 ft (19 m) of 60-inch cast film. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.8 in (1,900 mm)): the roof is wrapped from a platform.

Film: about 46 ft (14 m) for the open-top SUV to 62 ft (19 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).

Mitsubishi Pajero, first generation, factory photo
Factory color shown

1981–1991 Pajero SUV, open-top SUV (first generation)

1981–1991SUV, open-top SUV (3 or 5 doors)157.3 in (3,995 mm) to 183.1 in (4,650 mm)

On a first-generation Mitsubishi Pajero, paint age matters because the panels may be original or repainted. A test spot comes before a full wrap on a car of these years, to check how the paint holds the film. The body is 157.3 in (3,995 mm) to 183.1 in (4,650 mm) long and 74.4 in (1,890 mm) tall. The open-top SUV body has a fabric top that is not wrapped, and the film ends where the top begins.

Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.4 in (1,890 mm)): the roof is wrapped from a platform.

Film: about 44 ft (13.5 m) for the open-top SUV to 61 ft (18.5 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Pajero

A partial wrap on a Mitsubishi Pajero covers the roof, hood, or mirror caps, and it uses less film than a full body wrap. Pajero chrome delete covers window trim, decorative moldings, and badges with black film. Paint protection film (PPF) is a clear film that can protect the front end of the Pajero. The roof of a Pajero is wrapped from a platform because the body is tall.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi Pajero: body, cut-outs and film

The Mitsubishi Pajero is a tall SUV, and its vinyl wrap film has to follow body panels from 157.3 in (3,995 mm) to 192.9 in (4,900 mm) long. The body is 74.8 in (1,900 mm) high on some generations, so the roof is wrapped from a platform. Three-door and five-door styles share the same panel shapes on each generation. The open-top SUV of the first and second generations has a fabric top that is not wrapped, and the film ends where the top begins.

Pajero wrap ideas start with a tailgate that has the rear glass in it, so the film ends at the edge of the glass. Some trims have a sunroof, and the roof film is cut around its opening. Roof rails come off before the roof is wrapped, or the film is cut along them on trims that have them. Bright decorative moldings stay bright next to the film unless a chrome delete covers them with black film.

When you count how much vinyl to wrap a Pajero, the estimate changes from 44 ft (13.5 m) on the first-generation open-top SUV to 62 ft (19 m) on the second-generation SUV. The fourth generation takes about 59 ft (18 m) of 60-inch cast film for a standard wrap. The first generation needs up to about 76 ft (23 m) if you choose chrome or patterned film. Each generation has its own body length, so film use is not the same across all years.

Questions about wrapping a Mitsubishi Pajero

How much vinyl does it take to wrap a Mitsubishi Pajero?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap the fourth-generation Mitsubishi Pajero.

Can the roof of a Pajero be wrapped?

Yes, the roof of a Pajero can be wrapped, and the film is cut around the sunroof opening on trims that have a sunroof.

Which years of the Pajero take the same film cuts?

The fourth-generation Pajero from 2006 to 2021 has the same film cuts after the 2011 and 2014 restylings changed the bumpers and lights, so those years are not the same.

Can I wrap only the hood or the roof of a Pajero?

Yes, you can wrap only the hood or the roof of a Pajero as a partial wrap, and film use is less than on a full body wrap.