Wraps by car

Mitsubishi Colt wrap

The Mitsubishi Colt wrap page covers all seven generations of this subcompact car, from the 1988 third generation to the current 2023 model. A full wrap of the newest hatchback body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl film. For chrome or patterned film, plan for about 62 ft (19 m). The data here helps you estimate film, plan partial jobs, and understand what each body style requires.

7generations14.5 mof film for a full wrap

Mitsubishi Colt, seventh generation, factory photo
Mitsubishi Colt, seventh generation. Factory color shown.

Mitsubishi Colt wrap colors and ideas

  • Colt black wrap
  • Colt white wrap
  • Colt gray wrap
  • Colt silver wrap
  • Colt red wrap
  • Colt blue wrap
  • Colt green wrap
  • Colt yellow wrap
  • Colt orange wrap
  • Colt purple wrap
  • Colt pink wrap
  • Colt teal wrap
  • Colt brown wrap
  • Colt gold wrap
  • Colt chrome wrap
  • Colt color shift wrap
  • Colt carbon fiber wrap
  • Colt camo and patterned wrap

How much vinyl to wrap a Mitsubishi Colt

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowhatchback (5 doors)159.6 in (4,053 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
2002–2012convertible, hatchback, wagon (2 or 3 or 5 doors)152.4 in (3,870 mm) to 164.8 in (4,185 mm)about 41 ft (12.5 m) for the convertible to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
1995–2004hatchback (3 doors)152.8 in (3,880 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1992–1996hatchback (3 doors)155.7 in (3,955 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1988–1992hatchback (3 doors)155.5 in (3,950 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1984–1988hatchback (3 doors)157.3 in (3,995 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1978–1984hatchback (3 or 5 doors)149.2 in (3,790 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Colt wrap cost factors

Colt wrap cost depends mainly on the size of the car, the amount of film, and the labor for its body details. A 2023 hatchback uses about 48 ft (14.5 m) of film, while a 2002–2012 wagon uses up to 57 ft (17.5 m). Extra work like cut-outs for fog lamps or handling long doors on three-door models can add time. The condition of the paint and the type of film you choose also affect the final cost.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Colt wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Colt, seventh generation, factory photo
Factory color shown

2023–now Colt hatchback (seventh generation)

2023–nowhatchback (5 doors)159.6 in (4,053 mm)

The seventh-generation Mitsubishi Colt is a five-door hatchback that is 159.6 in (4,053 mm) long and needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full wrap. The body has four doors plus a tailgate, so the film is cut into more panels than on a three-door. The tailgate includes the rear glass, and the film ends at the edge of the glass. This body shape is straightforward for a standard color change wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Mitsubishi Colt, sixth generation, factory photo
Factory color shown

2002–2012 Colt convertible, hatchback, wagon (sixth generation)

2002–2012convertible, hatchback, wagon (2 or 3 or 5 doors)152.4 in (3,870 mm) to 164.8 in (4,185 mm)

The open top of the sixth-generation Mitsubishi Colt is handled differently depending on whether it is a fabric top or a folding hard top. A fabric top is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as separate panels of its own, matching the body color. The rest of the car is wrapped normally, with extra care at the edges of the top.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 41 ft (12.5 m) for the convertible to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Mitsubishi Colt, fifth generation, factory photo
Factory color shown

1995–2004 Colt hatchback (fifth generation)

1995–2004hatchback (3 doors)152.8 in (3,880 mm)

The fifth-generation Mitsubishi Colt was built from 1995 to 2004 as a three-door hatchback, but its years overlap with the next generation from 2002 to 2004. If you own a Colt from those overlapping years, check the body style and shape to determine which generation it is. The fifth generation has a distinctive 1990s look, while the sixth generation introduced more rounded styling. This page covers both, so identify your car before estimating film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Mitsubishi Colt, fourth generation, factory photo
Factory color shown

1992–1996 Colt hatchback (fourth generation)

1992–1996hatchback (3 doors)155.7 in (3,955 mm)

Paint age on a fourth-generation Mitsubishi Colt from 1992 to 1996 can vary widely, with panels that may be original or repainted. Before a full wrap, a test spot on each panel checks whether the film will adhere properly. A repainted surface may not hold vinyl as well as factory paint, so the installer may need to adjust preparation. The wrap itself takes about 46 ft (14 m) of film for this three-door hatchback.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mitsubishi Colt, third generation, factory photo
Factory color shown

1988–1992 Colt hatchback (third generation)

1988–1992hatchback (3 doors)155.5 in (3,950 mm)

The third-generation Mitsubishi Colt is a three-door hatchback from 1988 to 1992 with a length of 155.5 in (3,950 mm). It needs about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap, similar to the next two generations. Two long side doors are each one large piece of film, which requires careful installation. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mitsubishi Colt, second generation, factory photo
Factory color shown

1984–1988 Colt hatchback (second generation)

1984–1988hatchback (3 doors)157.3 in (3,995 mm)

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mitsubishi Colt, first generation, factory photo
Factory color shown

1978–1984 Colt hatchback (first generation)

1978–1984hatchback (3 or 5 doors)149.2 in (3,790 mm)

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Colt

A partial wrap on a Mitsubishi Colt can cover the roof, hood, or mirror caps in a different color or finish. Chrome delete covers window trim and badges with black film for a cleaner look. Paint protection film (PPF) on the front end is a clear layer that guards against stone chips. These smaller jobs use less film than a full wrap and focus on specific areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi Colt: body, cut-outs and film

The Mitsubishi Colt vinyl wrap job changes with body style and length, which range from 152.4 in (3,870 mm) to 164.8 in (4,185 mm) across generations. A five-door hatchback has more door seams and smaller panels than a three-door, which can affect how the film is cut and laid. The 2023 hatchback is 159.6 in (4,053 mm) long and uses a standard amount of film for its class. Longer wagons from the sixth generation need up to 57 ft (17.5 m) of film.

Colt wrap ideas start with the tailgate, where the rear glass sits in the panel and the film ends at the edge of the glass. On three-door models from 1988 to 2004, two long side doors mean each door is one large piece of film that requires careful handling. Some sixth-generation trims have fog lamps in the front bumper, so the bumper film needs cut-outs. The convertible body has a fabric top that is not wrapped, or a folding hard top wrapped as its own panels.

How much vinyl to wrap a Colt depends on which generation you own, because the bodies changed from 1988 to today. The newest 2023 hatchback needs about 48 ft (14.5 m), while the 1995–2004 three-door needs about 46 ft (14 m). For the 2002–2012 generation, the amount goes from about 41 ft (12.5 m) for the convertible to 57 ft (17.5 m) for the wagon. Chrome or patterned film adds roughly 30 percent to those figures.

Questions about wrapping a Mitsubishi Colt

How much vinyl does it take to wrap a Mitsubishi Colt?

It takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap the newest Mitsubishi Colt hatchback. For chrome or patterned film, the amount is about 62 ft (19 m). The estimate covers the full exterior of the 2023 and later five-door body.

Can I wrap only the hood or the roof of a Colt?

Yes, you can wrap only the hood or the roof of a Colt. Partial wraps may cover the roof, hood, or mirror caps, and chrome delete handles window trim and badges. Paint protection film is also available for the front end only.

Is a Colt hard to wrap?

A Colt is not especially hard to wrap, but a few details add work. The tailgate has the rear glass in it, so the film must end cleanly at the glass edge. Three-door models have two long side doors, each wrapped as one large piece. Some trims have fog lamps that require cut-outs in the bumper film.

How many generations of the Colt does this page cover?

This page covers seven generations of the Mitsubishi Colt, from the third generation built in 1988 to the seventh generation starting in 2023. Each generation is listed with its years, body styles, and film estimates.