Wraps by car

Mitsubishi Delica D:2 wrap

The Mitsubishi Delica D:2 wrap page covers the minivan in two generations, from 2011 to now. A full vinyl wrap of the newest body needs about 56 ft (17 m) of 60-inch (1.52 m) cast film. The first and second generation share the same 146.1 in (3,710 mm) length.

2generations17 mof film for a full wrap

Mitsubishi Delica D:2, second generation, factory photo
Mitsubishi Delica D:2, second generation. Factory color shown.

Mitsubishi Delica D:2 wrap colors and ideas

  • Delica D:2 black wrap
  • Delica D:2 white wrap
  • Delica D:2 gray wrap
  • Delica D:2 silver wrap
  • Delica D:2 red wrap
  • Delica D:2 blue wrap
  • Delica D:2 green wrap
  • Delica D:2 yellow wrap
  • Delica D:2 orange wrap
  • Delica D:2 purple wrap
  • Delica D:2 pink wrap
  • Delica D:2 teal wrap
  • Delica D:2 brown wrap
  • Delica D:2 gold wrap
  • Delica D:2 chrome wrap
  • Delica D:2 color shift wrap
  • Delica D:2 carbon fiber wrap
  • Delica D:2 camo and patterned wrap

How much vinyl to wrap a Mitsubishi Delica D:2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowvan (5 doors)146.1 in (3,710 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2011–2015van (5 doors)146.1 in (3,710 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Delica D:2 wrap cost factors

Delica D:2 wrap cost depends first on film type and the number of panels, because the two generations share one body size of 146.1 in (3,710 mm). A full wrap calls for about 56 ft (17 m) of standard cast film or 66 ft (20 m) of chrome or patterned film. The sliding door tracks and trim add labor, and the condition of older paint can add preparation steps.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Delica D:2 wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Delica D:2, second generation, factory photo
Factory color shown

2015–now Delica D:2 van (second generation)

2015–nowvan (5 doors)146.1 in (3,710 mm)

The second-generation Mitsubishi Delica D:2 has sliding side doors that shape the wrap work. The door tracks must stay bare, and the film is cut along them so it does not bind when the door opens. This leaves a clean painted line beside the track on every side of the van.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Mitsubishi Delica D:2, first generation, factory photo
Factory color shown

2011–2015 Delica D:2 van (first generation)

2011–2015van (5 doors)146.1 in (3,710 mm)

The first-generation Delica D:2, sold from 2011 to 2015, often arrives with original or repainted panels. A test spot on the paint shows whether the film will lift old clear coat or pull loose paint. This step decides how much surface preparation the full wrap needs before the vinyl goes on.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Delica D:2

A partial wrap on a Delica D:2 can cover the roof, hood, or mirror caps for a smaller color change. Chrome delete wraps the window trim and badges with black film to remove the bright finish. Paint protection film (PPF) is a clear option for the front end only, leaving the rest of the van unwrapped.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi Delica D:2: body, cut-outs and film

A Mitsubishi Delica D:2 vinyl wrap covers one five-door van body style that stays consistent in size across generations. Its compact minivan length of 146.1 in (3,710 mm) keeps the main panels short and manageable. The tall, boxy sides give the installer broad, flat areas without deep curves.

Delica D:2 wrap ideas start with the sliding side doors, where the door tracks stay bare and the film is cut along them. Badges and door handles are removed or cut around for clean edges. The tailgate and front bumper need patience because of their tight corners.

To calculate how much vinyl to wrap a Delica D:2, measure the same 146.1 in (3,710 mm) body for both generations. A full color change uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 66 ft (20 m) to match the pattern across panels.

Questions about wrapping a Mitsubishi Delica D:2

How much vinyl does it take to wrap a Mitsubishi Delica D:2?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast vinyl to wrap a Mitsubishi Delica D:2 in a single color. For chrome or patterned film the estimate rises to about 66 ft (20 m) because of pattern matching across the tall van body.

Are the sliding doors of a Delica D:2 wrapped?

Yes, the sliding doors of a Delica D:2 are wrapped. The film is cut along the door tracks, which stay bare so the door can open and close without rubbing.

Can I wrap only the hood or the roof of a Delica D:2?

Yes, you can wrap only the hood or the roof of a Delica D:2. These partial wrap options cover single panels, and mirror caps are another small area that can be color changed alone.

Is a Delica D:2 hard to wrap?

A Delica D:2 is not hard to wrap, but the sliding door tracks and the tall body add work. The door tracks must be left bare with straight film cuts, and the roof of this 69.5 in (1,765 mm) tall minivan is wrapped from a platform.