Wraps by car

Mitsubishi Attrage wrap

A Mitsubishi Attrage wrap covers a compact sedan that has been sold since 2013 in one generation. The current body takes about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap for a full color change. This page covers the film you need, the parts that take extra work, and the smaller wrap jobs owners ask for.

1generations16 mof film for a full wrap

Mitsubishi Attrage, first generation, factory photo
Mitsubishi Attrage, first generation. Factory color shown.

Mitsubishi Attrage wrap colors and ideas

  • Attrage black wrap
  • Attrage white wrap
  • Attrage gray wrap
  • Attrage silver wrap
  • Attrage red wrap
  • Attrage blue wrap
  • Attrage green wrap
  • Attrage yellow wrap
  • Attrage orange wrap
  • Attrage purple wrap
  • Attrage pink wrap
  • Attrage teal wrap
  • Attrage brown wrap
  • Attrage gold wrap
  • Attrage chrome wrap
  • Attrage color shift wrap
  • Attrage carbon fiber wrap
  • Attrage camo and patterned wrap

How much vinyl to wrap a Mitsubishi Attrage

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–nowsedan (4 doors)167.1 in (4,245 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Attrage wrap cost factors

An Attrage wrap cost depends on the size of the job, the film you pick, and how much of the body is covered. A full color change needs about 52 ft (16 m) of 60-inch (1.52 m) cast film, and the cameras and fog lamps add cut-out work. Partial jobs like the roof or hood use less material, and a chrome delete adds the time for the window trim and badges.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

Attrage wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Attrage, first generation, factory photo
Factory color shown

2013–now Attrage sedan (first generation)

2013–nowsedan (4 doors)167.1 in (4,245 mm)

The first generation Mitsubishi Attrage was launched in 2013 and was restyled in 2019. The restyling changed the bumpers and lights, so film cut for the earlier cars does not fit the later ones. If you order a kit, you must say whether your Attrage was built before or after the restyling.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an Attrage

A partial wrap on a Mitsubishi Attrage can cover the roof, the hood, or the mirror caps in a colored vinyl. An Attrage chrome delete covers the window trim and badges with black film for a darker look. Paint protection film (PPF) is a clear film that can be applied to the front end to protect the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi Attrage: body, cut-outs and film

A Mitsubishi Attrage vinyl wrap starts with a four-door sedan body that measures 167.1 in (4,245 mm) long. The car has no long roof or tall sides, so a standard 60-inch (1.52 m) roll is enough for every panel. Film yield improves because the hood, roof, and trunk lid are all flat and easy to lay in one piece.

The Attrage wrap ideas that work best account for the cameras and fog lamps on every trim. The film must be cut around each camera lens in the body, and the front bumper needs cut-outs for the fog lamps. Wrappers also remove the door handles, mirrors, and trim pieces before laying film on the doors and fenders.

When you work out how much vinyl to wrap an Attrage, the body is the same from 2013 to now but the 2019 restyling changed the bumpers and lights. A full wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The earlier cars have different bumper shapes, so film cut for one version does not fit the other.

Questions about wrapping a Mitsubishi Attrage

How much vinyl does it take to wrap a Mitsubishi Attrage?

About 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap is needed to wrap a Mitsubishi Attrage fully. That figure covers the newest body with the restyled bumpers and includes the material for the doors, fenders, roof, and trunk. A wrap with chrome or patterned film takes about 61 ft (18.5 m) because the pattern must be matched.

Which years of the Attrage take the same film cuts?

The same film cuts fit the Mitsubishi Attrage from 2013 to the 2018 restyling, and the same cuts fit the cars from 2019 onward. The bumpers and lights changed in 2019, so film cut for the earlier cars does not fit the later ones. The doors, roof, and fenders stayed the same shape across the whole run.

Can I wrap only the hood or the roof of an Attrage?

Yes, you can wrap only the hood or the roof of a Mitsubishi Attrage as a partial wrap. The hood and roof are flat and take less film than the full car, and mirror caps can also be wrapped on their own. A chrome delete is another small job that covers the window trim and badges with black film.

Is an Attrage hard to wrap?

An Attrage is not hard to wrap, but it adds a few steps that a simple car does not have. Every trim has cameras in the body and fog lamps in the front bumper, so the film must be cut around each lens. The 167.1 in (4,245 mm) length means a standard 60-inch (1.52 m) roll can cover each panel without seams.