Wraps by car

Mitsubishi Dignity wrap

This page covers the Mitsubishi Dignity wrap across two generations. The second generation ran from 2012 to 2016, and the first from 1999 to 2001. Both are four-door sedans, with the later body at 200.6 in (5,095 mm) and the earlier at 210.0 in (5,335 mm). A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.

2generations19 mof film for a full wrap

Mitsubishi Dignity, second generation, factory photo
Mitsubishi Dignity, second generation. Factory color shown.

Mitsubishi Dignity wrap colors and ideas

  • Dignity black wrap
  • Dignity white wrap
  • Dignity gray wrap
  • Dignity silver wrap
  • Dignity red wrap
  • Dignity blue wrap
  • Dignity green wrap
  • Dignity yellow wrap
  • Dignity orange wrap
  • Dignity purple wrap
  • Dignity pink wrap
  • Dignity teal wrap
  • Dignity brown wrap
  • Dignity gold wrap
  • Dignity chrome wrap
  • Dignity color shift wrap
  • Dignity carbon fiber wrap
  • Dignity camo and patterned wrap

How much vinyl to wrap a Mitsubishi Dignity

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2016sedan (4 doors)200.6 in (5,095 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1999–2001sedan (4 doors)210.0 in (5,335 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Dignity wrap cost factors

Dignity wrap cost depends on the film you choose and the size of the body. A 2012–2016 Dignity needs about 62 ft (19 m) of cast film, and a 1999–2001 car needs about 64 ft (19.5 m). The chrome window trim and the large bumpers add labor time. A partial wrap of just the roof and hood costs less because it uses less material.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: sedan (4 doors).

Dignity wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Dignity, second generation, factory photo
Factory color shown

2012–2016 Dignity sedan (second generation)

2012–2016sedan (4 doors)200.6 in (5,095 mm)

For the second generation Mitsubishi Dignity from 2012 to 2016, paint age is a key factor before a wrap. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The installer checks adhesion on a small area to see how the film sticks. This step is important because old paint can fail when the film is removed.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Mitsubishi Dignity, first generation, factory photo
Factory color shown

1999–2001 Dignity sedan (first generation)

1999–2001sedan (4 doors)210.0 in (5,335 mm)

The first generation Mitsubishi Dignity from 1999 to 2001 has a large sedan body. Its 210.0 in (5,335 mm) length means a full wrap takes about 64 ft (19.5 m) of 60-inch (1.52 m) film. The four doors and the long roof and hood add to the panel count. This older body has fewer complex curves than the newer one, but the size is the main driver of film use.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Dignity

Smaller jobs on a Dignity include a partial wrap, chrome delete, and paint protection film. A partial wrap can cover the roof, hood, or mirror caps. Dignity chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film installed on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi Dignity: body, cut-outs and film

A Mitsubishi Dignity vinyl wrap starts with the sedan body and its size. The second generation is 200.6 in (5,095 mm) long, and the first is 210.0 in (5,335 mm). That length means a full wrap uses between 62 ft (19 m) and 64 ft (19.5 m) of film. The four doors and the large hood and roof panels make the job straightforward but film-hungry.

Dignity wrap ideas often begin with what must come off or be cut around. The door handles, mirrors, badges, and trim pieces need to be removed or carefully cut out. The front and rear bumpers on the Dignity have many curves that require extra time. A chrome delete covers the window trim and badges with black film.

When you count how much vinyl to wrap a Dignity, generation changes matter. The first generation is 210.0 in (5,335 mm) long, and the second is 200.6 in (5,095 mm). The earlier car needs about 64 ft (19.5 m) of standard film, while the later one needs about 62 ft (19 m). For chrome or patterned film, add about 10 ft (3 m) to each figure.

Questions about wrapping a Mitsubishi Dignity

How much vinyl does it take to wrap a Mitsubishi Dignity?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a 2012–2016 Mitsubishi Dignity. For a 1999–2001 Dignity, the estimate is about 64 ft (19.5 m). These figures cover a standard color change wrap with no chrome or pattern. A chrome or patterned film adds about 10 ft (3 m) more.

Can I wrap only the hood or the roof of a Dignity?

Yes, you can wrap only the hood or the roof of a Dignity. A partial wrap often includes the roof, hood, or mirror caps. Many owners choose just the roof for a two-tone look or the hood for extra protection. The small area uses only a fraction of the film needed for a full wrap.

Is a Dignity hard to wrap?

A Mitsubishi Dignity is not the easiest car to wrap, mostly because of its size. The 200.6 in (5,095 mm) or 210.0 in (5,335 mm) body needs large sheets of film and careful handling. The bumpers have deep curves that require stretching and relief cuts. The chrome window trim and the door handles also add time to the job.

How many generations of the Dignity does this page cover?

This page covers two generations of the Mitsubishi Dignity. The first generation was produced from 1999 to 2001, and the second from 2012 to 2016. Both are four-door sedans, but the earlier car is about 9.4 in (240 mm) longer than the later one.