Wraps by car

Mitsubishi i-MiEV wrap

This page covers a Mitsubishi i-MiEV wrap, from film amounts to the specific details of this electric hatchback. The i-MiEV has one generation in the catalog, produced from 2009 to now. A full vinyl wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

Mitsubishi i-MiEV, first generation, factory photo
Mitsubishi i-MiEV, first generation. Factory color shown.

Mitsubishi i-MiEV wrap colors and ideas

  • i-MiEV black wrap
  • i-MiEV white wrap
  • i-MiEV gray wrap
  • i-MiEV silver wrap
  • i-MiEV red wrap
  • i-MiEV blue wrap
  • i-MiEV green wrap
  • i-MiEV yellow wrap
  • i-MiEV orange wrap
  • i-MiEV purple wrap
  • i-MiEV pink wrap
  • i-MiEV teal wrap
  • i-MiEV brown wrap
  • i-MiEV gold wrap
  • i-MiEV chrome wrap
  • i-MiEV color shift wrap
  • i-MiEV carbon fiber wrap
  • i-MiEV camo and patterned wrap

How much vinyl to wrap a Mitsubishi i-MiEV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–nowhatchback (5 doors)136.8 in (3,475 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

i-MiEV wrap cost factors

The i-MiEV wrap cost depends on the amount of film, the complexity of the body, and the finish you choose. A full wrap uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film takes about 52 ft (16 m). The small size of the i-MiEV means material use is lower than on larger cars.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2018: bumpers and lights differ between the versions, and so do the film cuts.

i-MiEV wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi i-MiEV, first generation, factory photo
Factory color shown

2009–now i-MiEV hatchback (first generation)

2009–nowhatchback (5 doors)136.8 in (3,475 mm)

The first generation of the Mitsubishi i-MiEV was restyled in 2018, with bumpers and lights changed. This means film cut for one version does not fit the other, so you must specify the production year when ordering a kit. The body length remains 136.8 in (3,475 mm), but the front and rear bumper shapes differ.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on an i-MiEV

For a partial wrap on the Mitsubishi i-MiEV, you can cover the roof, hood, or mirror caps. An i-MiEV chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi i-MiEV: body, cut-outs and film

A Mitsubishi i-MiEV vinyl wrap is straightforward because the car has one body style: a five-door hatchback. At 136.8 in (3,475 mm) long, the small footprint keeps film use low for a full wrap. The simple shape has few deep recesses, so most panels can be wrapped without stretching the film excessively.

When you plan i-MiEV wrap ideas, account for the tailgate with the rear glass in it. The film ends at the edge of the glass, so you need a precise cut around that opening. Every trim has fog lamps in the front bumper, which means cut-outs in the bumper film. The charge port door is wrapped as a small piece of its own.

To know how much vinyl to wrap an i-MiEV, you need to know that all production years share one body generation. The restyling in 2018 changed the bumpers and lights, so film cut for one version does not fit the other. For full wraps, measure your car and confirm which bumper style you have before ordering film.

Questions about wrapping a Mitsubishi i-MiEV

How much vinyl does it take to wrap a Mitsubishi i-MiEV?

About 44 ft (13.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Mitsubishi i-MiEV. This figure is for the newest body style with standard bumpers after the 2018 restyling. Chrome or patterned film takes more, about 52 ft (16 m).

Which years of the i-MiEV take the same film cuts?

For the i-MiEV, all years from 2009 to now take the same film cuts for the main body panels. However, the 2018 restyling changed the bumpers and lights, so film for the front and rear bumpers differs between pre-2018 and post-2018 versions. The taillights and headlights also changed shape.

Can I wrap only the hood or the roof of an i-MiEV?

Yes, you can wrap only the hood or the roof of an i-MiEV. A partial wrap can cover the roof, hood, or mirror caps with a contrasting color. This is a smaller job that uses less film than a full wrap.

Is an i-MiEV hard to wrap?

An i-MiEV is not hard to wrap, but it has a few details that add work. The tailgate has rear glass in it, so the film must end at the edge of the glass. Every trim has fog lamps in the front bumper, requiring cut-outs in the bumper film. The charge port door is wrapped as a small piece of its own.