Wraps by car

Mitsubishi eK Wagon wrap

A Mitsubishi eK Wagon wrap covers the whole body of this small van, from the first generation of 2004 to the current third generation. The newest body is 133.7 in (3,395 mm) long, and a full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the figure to about 57 ft (17.5 m).

3generations15 mof film for a full wrap

Mitsubishi eK Wagon, third generation, factory photo
Mitsubishi eK Wagon, third generation. Factory color shown.

Mitsubishi eK Wagon wrap colors and ideas

  • eK Wagon black wrap
  • eK Wagon white wrap
  • eK Wagon gray wrap
  • eK Wagon silver wrap
  • eK Wagon red wrap
  • eK Wagon blue wrap
  • eK Wagon green wrap
  • eK Wagon yellow wrap
  • eK Wagon orange wrap
  • eK Wagon purple wrap
  • eK Wagon pink wrap
  • eK Wagon teal wrap
  • eK Wagon brown wrap
  • eK Wagon gold wrap
  • eK Wagon chrome wrap
  • eK Wagon color shift wrap
  • eK Wagon carbon fiber wrap
  • eK Wagon camo and patterned wrap

How much vinyl to wrap a Mitsubishi eK Wagon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2019van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2006–2013van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2004–2006van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

eK Wagon wrap cost factors

An eK Wagon wrap cost depends on the size of the car, the film finish, and the number of pieces that must come off. The body is compact at 133.7 in (3,395 mm) long, so a solid color wrap uses about 49 ft (15 m) of 60-inch (1.52 m) film. Chrome or patterned film needs about 57 ft (17.5 m), and extra time for the sliding door tracks and badge removal also affects the final cost. No two installers quote the same job, so compare what is included rather than only the number.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2015: bumpers and lights differ between the versions, and so do the film cuts.

eK Wagon wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi eK Wagon, third generation, factory photo
Factory color shown

2013–2019 eK Wagon van (third generation)

2013–2019van (5 doors)133.7 in (3,395 mm)

The sliding side doors of the third generation eK Wagon decide where the film is cut, because the door tracks stay bare. This leaves the recessed channels exposed against the wrapped panels, so the edge of the film follows the track line. That detail makes a clean look and avoids peeling from the constant movement of the doors.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mitsubishi eK Wagon, second generation, factory photo
Factory color shown

2006–2013 eK Wagon van (second generation)

2006–2013van (5 doors)133.7 in (3,395 mm)

Paint age on a second generation eK Wagon from 2006–2013 can vary from panel to panel, because some cars may still have original paint while others have been repainted. A test spot on each panel comes before a full wrap to check that the paint can hold the film. Older paint that is flaking or weak must be corrected first, or the film will lift when it is removed.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mitsubishi eK Wagon, first generation, factory photo
Factory color shown

2004–2006 eK Wagon van (first generation)

2004–2006van (5 doors)133.7 in (3,395 mm)

The first generation eK Wagon of 2004–2006 is a small five-door van with a length of 133.7 in (3,395 mm), which keeps the film count low. A full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, or about 57 ft (17.5 m) with chrome or patterned film. The number of panels is the same as later generations, including the sliding doors with their bare tracks.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an eK Wagon

A partial wrap on an eK Wagon can cover the roof, the hood, or the mirror caps without wrapping the full body. An eK Wagon chrome delete covers the window trim and badges in black film to change the brightwork. Clear paint protection film (PPF) on the front end is another option for owners who want to guard the paint from stone chips. Each of these jobs uses less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsubishi eK Wagon: body, cut-outs and film

A Mitsubishi eK Wagon vinyl wrap follows the boxy five-door body and its sliding side doors. This is a mini-class van, so the body is compact but has tall panels from the beltline up. The sliding doors mean the wrap is cut along the door tracks and the film does not cover those recessed channels. Because all generations share the same length and body style, the same wrap plan fits every catalog year.

eK Wagon wrap ideas start with the side door tracks, which stay bare when the rest of the car is covered. The sliding doors have long recessed channels, and the installer cuts the film along those tracks for a clean look. Badges and door handles are removed for a smooth finish, and window trim can be wrapped in black film as a chrome delete. Mirror caps and the rear spoiler are wrapped separately from the main body.

How much vinyl to wrap an eK Wagon depends on the generation, but all three bodies in this catalog take the same film coverage. The third generation of 2013–2019, the second of 2006–2013, and the first of 2004–2006 are each 133.7 in (3,395 mm) long with five doors. That means one full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, or about 57 ft (17.5 m) if you choose chrome or patterned film. The only change between these generations for film count is the 2015 restyling of the third generation, which changed some trim but not the amount of film needed.

Questions about wrapping a Mitsubishi eK Wagon

How much vinyl does it take to wrap a Mitsubishi eK Wagon?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to fully wrap a Mitsubishi eK Wagon of the newest body. If you choose chrome or patterned film, the figure is about 57 ft (17.5 m) because the pattern must be matched. This estimate is for the whole exterior including the roof and the five doors.

Are the sliding doors of an eK Wagon wrapped?

Yes, the sliding doors of an eK Wagon are wrapped, but the door tracks are left bare and the film is cut along them. The film covers the door panel up to the track line, and the recessed channel stays exposed for the door mechanism. That keeps the film from being pinched or torn when the door slides open and closed.

Which years of the eK Wagon take the same film cuts?

The years 2013–2019 for the third generation eK Wagon take the same film cuts, with the 2015 restyling not changing the sliding door layout. The second generation of 2006–2013 and the first of 2004–2006 also share the same body length and door design, so the film cuts are the same across all three generations in this catalog.

Can I wrap only the hood or the roof of an eK Wagon?

Yes, you can wrap only the hood or the roof of an eK Wagon, and a partial wrap like that is a common smaller job. A chrome delete on the window trim and badges and clear paint protection film on the front end are other partial options. These jobs use less film than a full wrap and can be done without removing the sliding door panels.