Wraps by car

Neta Aya wrap

The Neta Aya wrap page covers the first generation of this electric SUV, produced from 2023 to now. A full vinyl wrap of the current body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, expect to use about 62 ft (19 m). This page explains the wrap process, film quantities, and options for the Aya.

1generations16 mof film for a full wrap

Neta Aya, first generation, factory photo
Neta Aya, first generation. Factory color shown.

Neta Aya wrap colors and ideas

  • Aya black wrap
  • Aya white wrap
  • Aya gray wrap
  • Aya silver wrap
  • Aya red wrap
  • Aya blue wrap
  • Aya green wrap
  • Aya yellow wrap
  • Aya orange wrap
  • Aya purple wrap
  • Aya pink wrap
  • Aya teal wrap
  • Aya brown wrap
  • Aya gold wrap
  • Aya chrome wrap
  • Aya color shift wrap
  • Aya carbon fiber wrap
  • Aya camo and patterned wrap

How much vinyl to wrap a Neta Aya

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowSUV (5 doors)160.2 in (4,070 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Aya wrap cost factors

The cost of an Aya wrap depends on the amount of film and the labor for a 160.2 in (4,070 mm) five-door SUV. A full color change uses about 52 ft (16 m) of cast film, while chrome or patterned film takes about 62 ft (19 m). Installers also charge for panel removal and cut-outs around the tailgate glass and charge port door. Film brand, finish, and shop rates change the final quote.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Aya wraps by generation

Swipe sideways. Tap a card for the full description.

Neta Aya, first generation, factory photo
Factory color shown

2023–now Aya SUV (first generation)

2023–nowSUV (5 doors)160.2 in (4,070 mm)

The first-generation Neta Aya is a compact SUV with a body length of 160.2 in (4,070 mm). Its five-door layout means a wrap covers around 12 to 14 panels. The roof, hood, doors, fenders, and tailgate all take film, but the size keeps total film use near 52 ft (16 m) of 60-inch (1.52 m) material. For a chrome or patterned wrap, the same body needs about 62 ft (19 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Aya

A partial wrap on the Aya can cover just the roof, hood, or mirror caps for a smaller color change. Aya chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These jobs use less film than a full wrap and can be done without wrapping every panel.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Neta Aya: body, cut-outs and film

The Neta Aya is a five-door SUV measuring 160.2 in (4,070 mm) long. Its compact size keeps the number of panels manageable for a full Neta Aya vinyl wrap. The tall body and rear tailgate add surface area, but the straight sides are easy to work with. A wrap installer can plan the panel layout without unusual waste.

Wrap ideas for the Aya start with a full color change, but detail work matters. The tailgate includes the rear glass, so the film ends at the edge of the glass. The charge port door is wrapped as a small piece of its own to keep the lines clean. Badges and window trim can be removed or masked for a neat finish.

To work out how much vinyl to wrap an Aya, start with the full body estimate of about 52 ft (16 m) of 60-inch (1.52 m) cast film. The first generation has no earlier body styles, so the same figure applies to every 2023–now Aya. A chrome or patterned film wrap uses about 62 ft (19 m) because the material must be laid in one direction. Add extra film for mistakes, test pieces, or wrapped edges.

Questions about wrapping a Neta Aya

How much vinyl does it take to wrap a Neta Aya?

A full wrap on a Neta Aya takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the figure rises to about 62 ft (19 m). These numbers cover the first-generation body from 2023 to now.

Can I wrap only the hood or the roof of an Aya?

Yes, you can wrap only the hood or the roof of an Aya. A partial wrap can also include the mirror caps. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) can be applied just to the front end.

Is an Aya hard to wrap?

An Aya is not especially hard to wrap, but a few details add work. The tailgate has the rear glass in it, so the film must be trimmed carefully at the edge of the glass. The charge port door is wrapped as a small separate piece, which needs precise cutting. The SUV's 160.2 in (4,070 mm) length is average, so film handling is straightforward.

How many generations of the Aya does this page cover?

This page covers one generation of the Neta Aya, the first generation. It has been produced from 2023 to now. There are no earlier generations in the catalog.