Wraps by car

Neta U wrap

The Neta U wrap page covers the first generation of the Neta U, built from 2020 to now, as a five-door SUV. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Choosing a chrome or patterned vinyl raises the total to about 69 ft (21 m).

1generations18.5 mof film for a full wrap

Neta U, first generation, factory photo
Neta U, first generation. Factory color shown.

Neta U wrap colors and ideas

  • Neta U black wrap
  • Neta U white wrap
  • Neta U gray wrap
  • Neta U silver wrap
  • Neta U red wrap
  • Neta U blue wrap
  • Neta U green wrap
  • Neta U yellow wrap
  • Neta U orange wrap
  • Neta U purple wrap
  • Neta U pink wrap
  • Neta U teal wrap
  • Neta U brown wrap
  • Neta U gold wrap
  • Neta U chrome wrap
  • Neta U color shift wrap
  • Neta U carbon fiber wrap
  • Neta U camo and patterned wrap

How much vinyl to wrap a Neta U

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)178.3 in (4,530 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Neta U wrap cost factors

A Neta U wrap cost depends on the size of the body at 178.3 in (4,530 mm) long and the number of panels to cover. The film type changes the amount needed: about 61 ft (18.5 m) for standard cast film or about 69 ft (21 m) for chrome or patterned film. The cost also depends on how many parts come off for a clean finish and how much the shop charges for the extra work on the tailgate and charge port.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Neta U wraps by generation

Swipe sideways. Tap a card for the full description.

Neta U, first generation, factory photo
Factory color shown

2020–now Neta U SUV (first generation)

2020–nowSUV (5 doors)178.3 in (4,530 mm)

The first generation Neta U, built from 2020 to now, is a five-door SUV that wraps like a mid-size body. The single tailgate with the rear glass in it makes the rear a large panel that needs a wide piece of film. The charge port door is a small extra panel, so the installer cuts that piece separately.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Neta U

A partial wrap on a Neta U can cover just the roof, hood, or mirror caps with a smaller amount of film. A Neta U chrome delete changes the window trim and badges from bright metal to black film, which is a small job on this car. Paint protection film (PPF) as a clear film on the front end protects the hood, fenders, and bumper without changing the color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Neta U: body, cut-outs and film

A Neta U vinyl wrap on this SUV means covering a body that is 178.3 in (4,530 mm) long with a tailgate and rear glass as one large panel. The five-door shape creates a tall rear area, so the installer uses the full width of the film there. The roof is long and flat, which is straightforward to wrap in one piece if two people handle the film.

When planning Neta U wrap ideas, remember that the tailgate includes the rear glass, so the film ends at the edge of the glass. The electric charge port door is wrapped as a small piece of its own, separate from the rear quarter panel. Door handles, mirrors, and the front bumper usually come off for a clean edge around each opening.

To work out how much vinyl to wrap a Neta U, measure the body at 178.3 in (4,530 mm) long and allow about 61 ft (18.5 m) of 60-inch (1.52 m) film. The five-door body has four side doors and a tailgate, so there are more door edges to trim than on a two-door car. A first generation model from any production year has the same shape, so the film estimate stays the same.

Questions about wrapping a Neta U

How much vinyl does it take to wrap a Neta U?

A full Neta U wrap takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the amount goes up to about 69 ft (21 m). The estimate is for the first generation body, which is the only generation of the Neta U.

Can I wrap only the hood or the roof of a Neta U?

Yes, you can wrap only the hood or the roof of a Neta U as a partial wrap. A partial wrap on this car can cover the roof, hood, or mirror caps with a smaller amount of film. The installer can also do a chrome delete on the window trim and badges.

Is a Neta U hard to wrap?

A Neta U is not a simple wrap because of two details: the tailgate includes the rear glass, so the film must end at the edge of the glass, and the electric charge port door is a small separate piece. The body is 178.3 in (4,530 mm) long, so large side panels need careful handling. Door handles, mirrors, and the front bumper usually come off for a clean finish.

How many generations of the Neta U does this page cover?

This page covers one generation of the Neta U, the first generation built from 2020 to now. The catalog shows a single body style, a five-door SUV. All production years of that generation have the same body shape.