Wraps by car

Neta L wrap

The Neta L wrap page covers the first generation of this SUV, produced from 2024 onward. A full wrap of the newest body takes about 18.5 square meters (199 square feet) of vinyl wrap. This figure includes the main exterior panels and a small margin for trimming. The Neta L is a five-door SUV with a tailgate that has the rear glass in it.

1generations

Neta L, first generation, factory photo
Neta L, first generation. Factory color shown.

Neta L wrap colors and ideas

  • Neta L black wrap
  • Neta L white wrap
  • Neta L gray wrap
  • Neta L silver wrap
  • Neta L red wrap
  • Neta L blue wrap
  • Neta L green wrap
  • Neta L yellow wrap
  • Neta L orange wrap
  • Neta L purple wrap
  • Neta L pink wrap
  • Neta L teal wrap
  • Neta L brown wrap
  • Neta L gold wrap
  • Neta L chrome wrap
  • Neta L color shift wrap
  • Neta L carbon fiber wrap
  • Neta L camo and patterned wrap

How much vinyl to wrap a Neta L

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)——

Neta L wrap cost factors

Neta L wrap cost depends on the amount of film, the number of panels, and the labor to install it. This car needs about 18.5 square meters (199 square feet) of vinyl, which sets the material volume. The tall roof and the tailgate with glass add time to the installation. A color change wrap with door jambs costs more than a same-color protective film.

  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Neta L wraps by generation

Swipe sideways. Tap a card for the full description.

Neta L, first generation, factory photo
Factory color shown

2024–now Neta L SUV (first generation)

2024–nowSUV (5 doors)

The first generation Neta L is an SUV with five doors, and its size means a lot of film. The side panels are tall, and the tailgate is a single large piece with glass. Installers count the roof, hood, four doors, front fenders, rear quarter panels, bumpers, and the tailgate. The panel count for this generation is fixed, which helps when estimating film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Roof, hood, chrome delete and PPF on a Neta L

A partial wrap on a Neta L covers the roof, the hood, or the mirror caps instead of the whole body. Neta L chrome delete means covering the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end of this car. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Neta L: body, cut-outs and film

A Neta L vinyl wrap is a large job because the SUV body has tall sides and a full tailgate. The five-door layout means separate film pieces for the hood, each door, and the rear hatch. Film is measured in square meters and square feet, and the total for this car is 18.5 square meters (199 square feet). Planning the panel layout before cutting saves material on a vehicle this size.

Neta L wrap ideas often start with the tailgate because the rear glass is set into it, so the film ends at the edge of the glass. The roof rails, door handles, and badges are removed or worked around during installation. Cut-outs are needed for the parking sensors, the rear wiper, and the license plate area. The front bumper has grille openings that are wrapped as separate sections.

When you count how much vinyl to wrap a Neta L, the first generation has one body style with no changes between years. The SUV shape has stayed the same from 2024 onward, so film measurements do not vary. A shop can use the same cutting templates and panel count for every Neta L made so far. This makes ordering film for a repair or a partial job straightforward.

Questions about wrapping a Neta L

How much vinyl does it take to wrap a Neta L?

A Neta L takes about 18.5 square meters (199 square feet) of vinyl for a full wrap. This figure comes from the film estimate for the newest body and includes a small margin for trimming. The amount is the same for every first-generation Neta L because the body has not changed since 2024.

Can I wrap only the hood or the roof of a Neta L?

Yes, you can wrap only the hood or the roof of a Neta L. A partial wrap on this car often covers the roof, the hood, or the mirror caps. These jobs use less film than a full wrap and can be matched to the original color or done in a contrast color.

Is a Neta L hard to wrap?

A Neta L is not hard to wrap, but the tailgate adds work because the rear glass is in it, so the film must end at the edge of the glass. The SUV size means tall panels and a large roof area. Installers also work around the door handles, badges, and parking sensors.

How many generations of the Neta L does this page cover?

This page covers one generation of the Neta L, the first generation produced from 2024 onward. There are no earlier or later generations in the catalog. The body style and dimensions are the same for all cars in this generation.