A Lafesta wrapped in silver starts with a finish choice, because matte, satin and gloss silver read differently on the boxy panels of a minivan. Matte silver hides ripples and looks calm, while gloss silver shows the body lines of the 181.7 in (4,615 mm) van more sharply. After the finish, the film line decides the exact silver tone and how the installer handles the long roof and tall sides. A full wrap is a full color change, but the door jambs can stay in the factory color unless you pay for the extra work.

Factory paint on a Lafesta matters for wrap preparation, because any chips or peeling clear coat will show through the silver film. The installer must degrease the body and remove tar or tree sap before the film goes on, especially around the sliding door tracks. Seams are placed along panel edges and body lines, such as the roof rails and the tailgate opening, to make them less visible. On a minivan with a 177.0 in (4,495 mm) length, fewer seams are possible on the tall side panels, but the film width still decides where they fall.

The silver film is removable, so a wrapped Lafesta can return to factory paint when the lease or the color change ends. Removal is easier when the wrap was professionally installed and the car was hand washed with mild soap. Do not use automatic car washes with brushes, because they can lift the film edges near the sliding door tracks. For daily care, rinse the car first and use a soft mitt to wash the large flat surfaces of the van.