Wraps by car

Nissan Lafesta wrap

This page covers the Nissan Lafesta wrap, a minivan produced across two generations. A vinyl wrap on the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. The first generation runs from 2004 to 2012, and the second from 2011 to 2018.

2generations20 mof film for a full wrap

Nissan Lafesta, second generation, factory photo
Nissan Lafesta, second generation. Factory color shown.

Nissan Lafesta wrap colors and ideas

  • Lafesta black wrap
  • Lafesta white wrap
  • Lafesta gray wrap
  • Lafesta silver wrap
  • Lafesta red wrap
  • Lafesta blue wrap
  • Lafesta green wrap
  • Lafesta yellow wrap
  • Lafesta orange wrap
  • Lafesta purple wrap
  • Lafesta pink wrap
  • Lafesta teal wrap
  • Lafesta brown wrap
  • Lafesta gold wrap
  • Lafesta chrome wrap
  • Lafesta color shift wrap
  • Lafesta carbon fiber wrap
  • Lafesta camo and patterned wrap

How much vinyl to wrap a Nissan Lafesta

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2018van (5 doors)181.7 in (4,615 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
2004–2012van (5 doors)177.0 in (4,495 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Lafesta wrap cost factors

Lafesta wrap cost depends on the film choice, the size of the van, and the extra work on the sliding doors. A solid color on a second-generation Lafesta needs about 66 ft (20 m) of 60-inch film, while chrome or patterned film takes about 79 ft (24 m). The first generation uses about 64 ft (19.5 m) for solid film and 74 ft (22.5 m) for chrome or patterned. Removing the door handles, mirror caps, and badges, plus cutting around the door tracks, adds labor time.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Lafesta wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Lafesta, second generation, factory photo
Factory color shown

2011–2018 Lafesta van (second generation)

2011–2018van (5 doors)181.7 in (4,615 mm)

The second-generation Lafesta from 2011 to 2018 has sliding side doors where the tracks stay bare, and the film is cut along them. This body is 181.7 in (4,615 mm) long and uses about 66 ft (20 m) of solid 60-inch film. The tall roofline and the flat door surfaces make the wrap layout straightforward. You can leave the tracks unpainted or cover them with a separate narrow strip.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Nissan Lafesta, first generation, factory photo
Factory color shown

2004–2012 Lafesta van (first generation)

2004–2012van (5 doors)177.0 in (4,495 mm)

The first-generation Lafesta from 2004 to 2012 calls for a paint check before the wrap, because panels may be original or repainted and a test spot comes before a full wrap. This body is 177.0 in (4,495 mm) long and needs about 64 ft (19.5 m) of solid 60-inch cast film. The film is cut along the sliding door tracks, and the older paint may need more cleaning before installation.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Lafesta

A partial wrap on a Lafesta covers the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges. Paint protection film (PPF) is a clear film on the front end. A chrome delete on this minivan works well around the side windows and the tailgate. A roof wrap in black is a straightforward job because the roof panel is flat and has no antenna on some years.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Lafesta: body, cut-outs and film

A Nissan Lafesta vinyl wrap covers one boxy van body with five doors. The second generation is 181.7 in (4,615 mm) long, and the first is 177.0 in (4,495 mm) long. Both sizes mean the roof and tall side panels use almost all of the film width. You plan the wrap around the sliding door tracks and the long rear quarter panels.

Lafesta wrap ideas start with the sliding side doors, where the door tracks stay bare and the film is cut along them. The door handles, mirror caps, and badges come off for a clean edge. The roof rails and the rear spoiler need relief cuts, and the front bumper is wrapped in sections. You can keep the factory paint color and add only a black roof or a hood stripe.

How much vinyl to wrap a Lafesta changes by generation and film type. A second-generation Lafesta needs about 66 ft (20 m) in a solid color, but chrome or patterned film takes about 79 ft (24 m). A first-generation car needs about 64 ft (19.5 m), or 74 ft (22.5 m) with chrome or patterned film. The extra length for chrome or patterned film comes from matching the pattern across panels and the sliding doors.

Questions about wrapping a Nissan Lafesta

How much vinyl does it take to wrap a Nissan Lafesta?

A full wrap on a second-generation Nissan Lafesta takes about 66 ft (20 m) of 60-inch (1.52 m) film. A first-generation Lafesta takes about 64 ft (19.5 m) of the same film. Chrome or patterned film adds about 13 ft (4 m) to the second generation and about 10 ft (3 m) to the first generation. These figures include the extra for the sliding door areas and the bumpers.

Are the sliding doors of a Lafesta wrapped?

Yes, the sliding doors of a Lafesta are wrapped, but the door tracks stay bare and the film is cut along them. This keeps the doors sliding freely and gives a clean line at the track. The film is tucked behind the track cover where possible.

Can I wrap only the hood or the roof of a Lafesta?

Yes, you can wrap only the hood or the roof of a Lafesta. A partial wrap covers the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges. Paint protection film is another partial option for the front end.

Is a Lafesta hard to wrap?

A Lafesta adds some work because of the sliding side doors, where the tracks stay bare and the film is cut along them. The van body is long, with the second generation at 181.7 in (4,615 mm) and the first at 177.0 in (4,495 mm), so handling the large roof and side panels takes extra care. The door handles, mirror caps, and badges need to come off for a clean wrap.