Wraps by car

Packard 200/250 wrap

The Packard 200/250 wrap page covers the 1951–1952 Packard 200/250, a single-generation luxury car offered as a two- or four-door sedan. This page explains what a vinyl wrap involves on this body, from film quantities to the panels that need extra care. A full wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film.

1generations20 mof film for a full wrap

Packard 200/250, first generation, factory photo
Packard 200/250, first generation. Factory color shown.

Packard 200/250 wrap colors and ideas

  • 200/250 black wrap
  • 200/250 white wrap
  • 200/250 gray wrap
  • 200/250 silver wrap
  • 200/250 red wrap
  • 200/250 blue wrap
  • 200/250 green wrap
  • 200/250 yellow wrap
  • 200/250 orange wrap
  • 200/250 purple wrap
  • 200/250 pink wrap
  • 200/250 teal wrap
  • 200/250 brown wrap
  • 200/250 gold wrap
  • 200/250 chrome wrap
  • 200/250 color shift wrap
  • 200/250 carbon fiber wrap
  • 200/250 camo and patterned wrap

How much vinyl to wrap a Packard 200/250

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1951–1952sedan (2 or 4 doors)209.4 in (5,318 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

200/250 wrap cost factors

A 200/250 wrap cost depends mainly on the size of the car, the condition of the paint and the film you choose. This Packard measures 209.4 in (5,318 mm) long and is a full-size sedan, so it uses about 66 ft (20 m) of 60-inch (1.52 m) cast film. If the panels are original or uneven, the installer may need more prep time and more film for test pieces.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: sedan (2 or 4 doors).

200/250 wraps by generation

Swipe sideways. Tap a card for the full description.

Packard 200/250, first generation, factory photo
Factory color shown

1951–1952 200/250 sedan (first generation)

1951–1952sedan (2 or 4 doors)209.4 in (5,318 mm)

The first-generation Packard 200/250 is the only generation this page covers, and it was produced in 1951 and 1952. Paint age is the first thing to check on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. The original lacquer can be fragile, so an experienced installer will test adhesion on each panel before committing.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a 200/250

On the 200/250, a partial wrap can cover the roof, hood or mirror caps, and a 200/250 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is also an option, applied as a clear film on the front end to guard the paint from stone chips. These smaller jobs still need careful work because the original chrome and paint can be delicate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Packard 200/250: body, cut-outs and film

A Packard 200/250 vinyl wrap is a large job because the sedan body measures 209.4 in (5,318 mm) in overall length. The long roof, tall doors and wide rear fenders add surface area that a shorter modern car does not have. The two-door and four-door sedans differ in door length and rear side glass, so a wrap kit has to match the exact body style.

For 200/250 wrap ideas, the door handles, mirrors, trim and emblems are the main parts that need cut-outs or removal. The chrome hood ornament and the Packard script on the trunk are delicate, so they are better removed than cut around. The long chrome side spears can be wrapped over or removed for a cleaner look, depending on the finish you want.

When you work out how much vinyl to wrap a 200/250, the single generation from 1951–1952 keeps the figure simple. The same basic sedan body ran for both model years, so the film estimate does not change between them. Different trim levels can add extra chrome or two-tone paint, but the metal surface stays much the same.

Questions about wrapping a Packard 200/250

How much vinyl does it take to wrap a Packard 200/250?

About 66 ft (20 m) of 60-inch (1.52 m) cast vinyl is the estimate to wrap a Packard 200/250. That figure is for a full color change on the sedan body. If you choose a chrome or patterned film, the total is about 77 ft (23.5 m) because those films need extra material for panel matching.

Can I wrap only the hood or the roof of a 200/250?

Yes, you can wrap only the hood or the roof of a 200/250 as a partial wrap. The roof is a large flat panel that shows off gloss or satin film, while the hood is a simpler shape with fewer cut-outs. Mirror caps are another small job that changes the look without covering the whole car.

Is a 200/250 hard to wrap?

A Packard 200/250 is not the easiest car to wrap because of its size and the age of the panels. The sedan is 209.4 in (5,318 mm) long, so large pieces of film have to be handled on tall sections. The original chrome trim and badges need care, and old paint may need extra cleaning or a test spot before the wrap.

How many generations of the 200/250 does this page cover?

This page covers one generation of the Packard 200/250. That single generation was built in 1951 and 1952 as a full-size luxury sedan. All 200/250 models fall under the same body style, so the wrap advice and film estimate apply to the whole series.