Wraps by car

Packard Custom Eight wrap

This Packard Custom Eight wrap page covers the 1927–1950 luxury car and its single generation. The Custom Eight came as a convertible, coupe, and sedan with two or four doors. A full vinyl wrap of the newest body takes about 64 ft (19.5 m) for the convertible to 67 ft (20.5 m) for the sedan.

1generations19.5 mof film for a full wrap

Packard Custom Eight, first generation, factory photo
Packard Custom Eight, first generation. Factory color shown.

Packard Custom Eight wrap colors and ideas

  • Custom Eight black wrap
  • Custom Eight white wrap
  • Custom Eight gray wrap
  • Custom Eight silver wrap
  • Custom Eight red wrap
  • Custom Eight blue wrap
  • Custom Eight green wrap
  • Custom Eight yellow wrap
  • Custom Eight orange wrap
  • Custom Eight purple wrap
  • Custom Eight pink wrap
  • Custom Eight teal wrap
  • Custom Eight brown wrap
  • Custom Eight gold wrap
  • Custom Eight chrome wrap
  • Custom Eight color shift wrap
  • Custom Eight carbon fiber wrap
  • Custom Eight camo and patterned wrap

How much vinyl to wrap a Packard Custom Eight

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1927–1950convertible, coupe, sedan (2 or 4 doors)212.6 in (5,401 mm) to 213.3 in (5,417 mm)about 64 ft (19.5 m) for the convertible to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)

Custom Eight wrap cost factors

Custom Eight wrap cost depends on the body style and the film used. A convertible needs less film than a sedan, about 64 ft (19.5 m) versus 67 ft (20.5 m). Chrome or patterned film can raise the amount to about 77 ft (23.5 m). Installation time is also affected by the car's length of 212.6 in (5,401 mm) to 213.3 in (5,417 mm).

  • Film for a full wrap: about 64 ft (19.5 m) for the convertible to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Custom Eight wraps by generation

Swipe sideways. Tap a card for the full description.

Packard Custom Eight, first generation, factory photo
Factory color shown

1927–1950 Custom Eight convertible, coupe, sedan (first generation)

1927–1950convertible, coupe, sedan (2 or 4 doors)212.6 in (5,401 mm) to 213.3 in (5,417 mm)

The first generation Packard Custom Eight has an open top on the convertible body that is not wrapped. The fabric top is left uncovered and the film ends where the top begins. For a folding hard top, the wrap is applied as panels of its own. This keeps the vinyl from interfering with the top's operation.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 64 ft (19.5 m) for the convertible to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a Custom Eight

A partial wrap on a Packard Custom Eight can cover the roof, hood, or mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These Custom Eight chrome delete and partial wrap options allow smaller color changes without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Packard Custom Eight: body, cut-outs and film

A Packard Custom Eight vinyl wrap has to work around body styles that differ in length and panel count. The car measures 212.6 in (5,401 mm) to 213.3 in (5,417 mm) long depending on the body. Convertibles have a fabric top that is not wrapped, while sedans have a fixed roof that adds film area. The film estimate ranges from about 64 ft (19.5 m) for the convertible to 67 ft (20.5 m) for the sedan.

Custom Eight wrap ideas should account for parts that need cut-outs or come off the car. Door handles, badges, and trim are removed or cut around for a clean install. The convertible body has a fabric top that is not wrapped and the film ends where the top begins. A folding hard top is wrapped as separate panels of its own.

Knowing how much vinyl to wrap a Custom Eight helps when comparing film between generations. This page has one generation, listed as 1927–1950. The film estimate is about 64 ft (19.5 m) for the convertible to 67 ft (20.5 m) for the sedan using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 77 ft (23.5 m).

Questions about wrapping a Packard Custom Eight

How much vinyl does it take to wrap a Packard Custom Eight?

It takes about 64 ft (19.5 m) to 67 ft (20.5 m) of vinyl to wrap a Packard Custom Eight, depending on body style. The convertible needs about 64 ft (19.5 m) and the sedan about 67 ft (20.5 m), using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 77 ft (23.5 m).

Is the top of a Custom Eight wrapped?

No, the top of a Custom Eight is not wrapped on the convertible body. The fabric top remains uncovered and the film ends where the top begins. A folding hard top is wrapped as panels of its own, separate from the body panels.

Which Custom Eight body takes more film?

The sedan takes more film than the convertible in a Packard Custom Eight wrap. The sedan needs about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. The convertible needs about 64 ft (19.5 m) because the fabric top is not wrapped.

Can I wrap only the hood or the roof of a Custom Eight?

Yes, you can wrap only the hood or the roof of a Custom Eight. A partial wrap can cover the roof, hood, or mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is another option for the front end.