Wraps by car

PGO Cevennes wrap

The PGO Cevennes wrap guide covers this French sports car, which has one generation, and a full vinyl wrap takes about 39 ft (12 m) of 60-inch (1.52 m) cast film.

1generations12 mof film for a full wrap

PGO Cevennes, first generation, factory photo
PGO Cevennes, first generation. Factory color shown.

PGO Cevennes wrap colors and ideas

  • Cevennes black wrap
  • Cevennes white wrap
  • Cevennes gray wrap
  • Cevennes silver wrap
  • Cevennes red wrap
  • Cevennes blue wrap
  • Cevennes green wrap
  • Cevennes yellow wrap
  • Cevennes orange wrap
  • Cevennes purple wrap
  • Cevennes pink wrap
  • Cevennes teal wrap
  • Cevennes brown wrap
  • Cevennes gold wrap
  • Cevennes chrome wrap
  • Cevennes color shift wrap
  • Cevennes carbon fiber wrap
  • Cevennes camo and patterned wrap

How much vinyl to wrap a PGO Cevennes

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–nowconvertible (2 doors)145.7 in (3,700 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m)

Cevennes wrap cost factors

Cevennes wrap cost depends on the number of panels and the film finish, not on a price list. A full wrap of this 145.7 in (3,700 mm) convertible uses about 39 ft (12 m) of 60-inch (1.52 m) cast film. A chrome or patterned film raises the material amount to about 44 ft (13.5 m). The installer's time also depends on how much trim is removed.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Cevennes wraps by generation

Swipe sideways. Tap a card for the full description.

PGO Cevennes, first generation, factory photo
Factory color shown

2005–now Cevennes convertible (first generation)

2005–nowconvertible (2 doors)145.7 in (3,700 mm)

The open top of the first generation PGO Cevennes is not wrapped if it is fabric, and the film ends along its edge. A folding hard top, if fitted, is wrapped as its own set of panels. The windshield frame and the panel behind the seats remain part of the body wrap. The film meets the top along a clean line, with no overlap.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).

Roof, hood, chrome delete and PPF on a Cevennes

A partial wrap on a Cevennes can cover the hood, mirror caps, or rear deck without doing the whole car. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as a clear film on the front end. Each of these jobs uses less film than a full color change wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a PGO Cevennes: body, cut-outs and film

A PGO Cevennes vinyl wrap is sized to a compact convertible that is 145.7 in (3,700 mm) long. The two-door body has simple, curved panels, so the film reaches around the rear haunches. The fabric top is not wrapped, so the roof area does not add film. You order wrap material for the painted body only.

Cevennes wrap ideas often start with the areas that stay visible when the top is down. The door handles, mirrors and badges are removed or cut around for a clean edge. The windshield frame and the panel behind the seats must be wrapped in separate pieces. The fabric top is never covered, and film ends where the top begins.

To know how much vinyl to wrap a Cevennes, you compare one body size through its single generation. The car has been built as a convertible from 2005 to now, so the panel count stays the same. A chrome or patterned film needs about 44 ft (13.5 m) for this car. The estimate changes only if you wrap fewer panels.

Questions about wrapping a PGO Cevennes

How much vinyl does it take to wrap a PGO Cevennes?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap a PGO Cevennes. For chrome or patterned film the estimate is about 44 ft (13.5 m). These figures cover the painted body of the convertible, not the fabric top.

Is the top of a Cevennes wrapped?

No, the top of a Cevennes is not wrapped when it is a fabric convertible top. The film ends where the top begins, and a folding hard top is wrapped as its own panels. The windshield frame and the panel behind the seats are wrapped as part of the body.

Can I wrap only the hood or the roof of a Cevennes?

Yes, you can wrap only the hood or the roof of a Cevennes as a partial wrap. The hood, mirror caps and rear deck are typical single-panel jobs. A roof wrap would apply only if the car has a hard top, because the fabric top is not covered.

Is a Cevennes hard to wrap?

A Cevennes is not the hardest car to wrap, but the open top adds work. The fabric top must be protected from heat and film edges, and the windshield frame is a separate piece. At 145.7 in (3,700 mm) long, the car is small, so the film is easier to handle than on a larger body.