Wraps by car

Polestar 1 wrap

The Polestar 1 wrap page covers the first generation of the Polestar 1, produced from 2019 onward. A full vinyl wrap of this coupe takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 67 ft (20.5 m). The page details body styles, film needs, and wrap options.

1generations16 mof film for a full wrap

Polestar 1, first generation, factory photo
Polestar 1, first generation. Factory color shown.

Polestar 1 wrap colors and ideas

  • Polestar 1 black wrap
  • Polestar 1 white wrap
  • Polestar 1 gray wrap
  • Polestar 1 silver wrap
  • Polestar 1 red wrap
  • Polestar 1 blue wrap
  • Polestar 1 green wrap
  • Polestar 1 yellow wrap
  • Polestar 1 orange wrap
  • Polestar 1 purple wrap
  • Polestar 1 pink wrap
  • Polestar 1 teal wrap
  • Polestar 1 brown wrap
  • Polestar 1 gold wrap
  • Polestar 1 chrome wrap
  • Polestar 1 color shift wrap
  • Polestar 1 carbon fiber wrap
  • Polestar 1 camo and patterned wrap

How much vinyl to wrap a Polestar 1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowcoupe (2 doors)180.5 in (4,585 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Polestar 1 wrap cost factors

Polestar 1 wrap cost depends on film choice, labor hours, and surface condition. A full wrap needs about 52 ft (16 m) of cast film, or 67 ft (20.5 m) of chrome or patterned film. The coupe's two long doors and charge port door add time. Partial jobs like a roof wrap use less material and lower labor.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Polestar 1 wraps by generation

Swipe sideways. Tap a card for the full description.

Polestar 1, first generation, factory photo
Factory color shown

2019–now Polestar 1 coupe (first generation)

2019–nowcoupe (2 doors)180.5 in (4,585 mm)

The first generation Polestar 1 is a compact coupe that measures 180.5 in (4,585 mm) long. This body style has only two doors, so the side panels are large but few. A full wrap needs about 52 ft (16 m) of standard film. The charge port door is a separate small panel on every version.

Two long side doors: each door is one large piece of film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Polestar 1

A partial wrap on a Polestar 1 can cover the roof, hood, or mirror caps. Polestar 1 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These jobs use less film than a full wrap and focus on high-impact areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Polestar 1: body, cut-outs and film

A Polestar 1 vinyl wrap must cover a compact coupe body that is 180.5 in (4,585 mm) long. The two-door design means fewer, simpler panels than a four-door car. Each of the two long side doors is one large piece of film. The overall size keeps the wrap manageable for one installer.

Polestar 1 wrap ideas include handling the charge port door as a small piece of film. Both plug-in and electric versions have this door, so it must be cut out or wrapped separately. The side doors are long and need wide film sheets. The coupe's smooth lines allow clean edges without extra relief cuts.

To figure how much vinyl to wrap a Polestar 1, start with the single body style in the catalog. The first generation coupe has not changed size since 2019. The 180.5 in (4,585 mm) length and two doors are the same for every year. Only the charge port door adds a small extra piece.

Questions about wrapping a Polestar 1

How much vinyl does it take to wrap a Polestar 1?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Polestar 1. For chrome or patterned film, the estimate is about 67 ft (20.5 m). This figure covers the full coupe body including the charge port door. The first generation Polestar 1 has not changed size since 2019.

Can I wrap only the hood or the roof of a Polestar 1?

Yes, you can wrap only the hood or the roof of a Polestar 1. Partial wrap jobs include the roof, hood, and mirror caps. These smaller areas need less film and are quicker to install. The coupe's hood and roof are each single continuous panels.

Is a Polestar 1 hard to wrap?

The Polestar 1 is not hard to wrap, but a few details add work. Each long side door is one large piece of film that must be handled carefully. The charge port door on plug-in and electric versions is a small separate piece. The coupe's compact size and two doors keep the panel count low.

How many generations of the Polestar 1 does this page cover?

This page covers one generation of the Polestar 1: the first generation, produced from 2019 to now. The coupe body style and dimensions have stayed the same throughout this generation.