Wraps by car

Polestar 5 wrap

The Polestar 5 wrap page covers the first generation of the electric sedan, produced from 2025 onward. A full wrap of this body uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl film. The page explains the film amounts, the wrap ideas, and the cost factors for this car.

1generations17.5 mof film for a full wrap

Polestar 5, first generation, factory photo
Polestar 5, first generation. Factory color shown.

Polestar 5 wrap colors and ideas

  • Polestar 5 black wrap
  • Polestar 5 white wrap
  • Polestar 5 gray wrap
  • Polestar 5 silver wrap
  • Polestar 5 red wrap
  • Polestar 5 blue wrap
  • Polestar 5 green wrap
  • Polestar 5 yellow wrap
  • Polestar 5 orange wrap
  • Polestar 5 purple wrap
  • Polestar 5 pink wrap
  • Polestar 5 teal wrap
  • Polestar 5 brown wrap
  • Polestar 5 gold wrap
  • Polestar 5 chrome wrap
  • Polestar 5 color shift wrap
  • Polestar 5 carbon fiber wrap
  • Polestar 5 camo and patterned wrap

How much vinyl to wrap a Polestar 5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowsedan (4 doors)200.3 in (5,087 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Polestar 5 wrap cost factors

The Polestar 5 wrap cost depends on the film type, the labor for the 200.3 in (5,087 mm) body, and the coverage. A full color change uses about 57 ft (17.5 m) of cast film and every panel of the sedan. A chrome or patterned wrap needs about 74 ft (22.5 m) and adds time for alignment. Partial jobs like a hood or roof reduce the film amount and the labor.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).
  • Electric car: the charge port door is wrapped as a small piece of its own.

Polestar 5 wraps by generation

Swipe sideways. Tap a card for the full description.

Polestar 5, first generation, factory photo
Factory color shown

2025–now Polestar 5 sedan (first generation)

2025–nowsedan (4 doors)200.3 in (5,087 mm)

The first generation Polestar 5 is a four-door sedan with a body length of 200.3 in (5,087 mm). Its size means a full wrap takes about 57 ft (17.5 m) of 60-inch film and extra care on the long roof. The four doors and the trunk lid add panels to cut and tuck. Electric car details like the charge port door are wrapped as a separate small piece.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Polestar 5

A partial wrap on the Polestar 5 can cover the roof, the hood, or the mirror caps with film. The chrome delete option wraps the window trim and the badges in black film. Paint protection film (PPF) can be applied as a clear film on the front end. These jobs use less film than a full wrap but still need precise cutting on the sedan body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Polestar 5: body, cut-outs and film

The Polestar 5 vinyl wrap starts with a 200.3 in (5,087 mm) long sedan body with four doors. Its mid-size length means a single 60-inch roll can cover most panels without piecing. The four-door layout adds seams at each door and the fenders. The charge port door is wrapped as a small piece of its own.

Polestar 5 wrap ideas begin with the charge port door, which needs a separate film piece and careful cutting. The door handles and the trim around the windows require precise trimming to keep a clean edge. The side mirrors come off for easier wrapping of the caps. The front bumper has deep air intakes that take extra time to heat and tuck the film.

How much vinyl to wrap a Polestar 5 depends on the single generation offered since 2025. A standard color change needs about 57 ft (17.5 m) of 60-inch film. Chrome or patterned film requires about 74 ft (22.5 m) because the pattern must be matched. The wrap facts for this car are the same for all years in the catalog.

Questions about wrapping a Polestar 5

How much vinyl does it take to wrap a Polestar 5?

A Polestar 5 takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl for a full wrap. That estimate covers the first generation sedan body from 2025 onward. Chrome or patterned film increases the amount to about 74 ft (22.5 m). The charge port door is wrapped as a small piece of its own.

Can I wrap only the hood or the roof of a Polestar 5?

Yes, you can wrap only the hood or the roof of a Polestar 5. These partial wrap jobs use less film than a full wrap. The roof, hood, and mirror caps are common partial choices for this sedan. A chrome delete on the window trim and badges is another smaller job.

Is a Polestar 5 hard to wrap?

A Polestar 5 has some wrap challenges, mostly from its size and electric details. The body is 200.3 in (5,087 mm) long, so large panels like the roof need careful handling. The charge port door must be wrapped as a small piece of its own, not as part of the fender. The deep front bumper and the four doors also add cutting time.

How many generations of the Polestar 5 does this page cover?

This page covers one generation of the Polestar 5, the first generation from 2025 onward. The catalog shows no earlier generations for this model. The wrap amounts listed apply to that single body style. The charge port door detail is part of this generation's wrap facts.