Wraps by car

Polestar 3 wrap

The Polestar 3 wrap page covers the first generation of this electric SUV, produced from 2022 onward. A full vinyl wrap of the Polestar 3 uses about 69 ft (21 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate rises to roughly 80 ft (24.5 m).

1generations21 mof film for a full wrap

Polestar 3, first generation, factory photo
Polestar 3, first generation. Factory color shown.

Polestar 3 wrap colors and ideas

  • Polestar 3 black wrap
  • Polestar 3 white wrap
  • Polestar 3 gray wrap
  • Polestar 3 silver wrap
  • Polestar 3 red wrap
  • Polestar 3 blue wrap
  • Polestar 3 green wrap
  • Polestar 3 yellow wrap
  • Polestar 3 orange wrap
  • Polestar 3 purple wrap
  • Polestar 3 pink wrap
  • Polestar 3 teal wrap
  • Polestar 3 brown wrap
  • Polestar 3 gold wrap
  • Polestar 3 chrome wrap
  • Polestar 3 color shift wrap
  • Polestar 3 carbon fiber wrap
  • Polestar 3 camo and patterned wrap

How much vinyl to wrap a Polestar 3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)192.9 in (4,900 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Polestar 3 wrap cost factors

Polestar 3 wrap cost depends on the area covered, the film type, and the labor for this specific SUV. A full wrap takes about 69 ft (21 m) of cast film, or about 80 ft (24.5 m) for chrome or patterned stock. The 192.9 in (4,900 mm) length and five doors add panels and time compared with a smaller car.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Polestar 3 wraps by generation

Swipe sideways. Tap a card for the full description.

Polestar 3, first generation, factory photo
Factory color shown

2022–now Polestar 3 SUV (first generation)

2022–nowSUV (5 doors)192.9 in (4,900 mm)

The first generation Polestar 3 is an SUV with five doors and a length of 192.9 in (4,900 mm). This size means a full wrap uses about 69 ft (21 m) of 60-inch film, or 80 ft (24.5 m) for chrome or patterned film. The body style breaks into many panels: hood, roof, four doors, fenders, bumpers, rockers, and the tailgate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Polestar 3

For a partial wrap on a Polestar 3, you can cover just the roof, hood, or mirror caps to change the look. A Polestar 3 chrome delete covers the window trim and badges with black film, removing the brightwork. Paint protection film (PPF) is a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Polestar 3: body, cut-outs and film

A Polestar 3 vinyl wrap starts at 192.9 in (4,900 mm) of body length and five doors. The SUV body style means large side panels, a long roof, and a tall tailgate, all of which increase film use. Installers count the roof, hood, fenders, doors, rockers, bumpers, and the tailgate as separate panels.

Polestar 3 wrap ideas must account for the tailgate and its integrated rear glass. The film ends cleanly at the edge of the glass, leaving a defined cut line. Because this is an electric car, the charge port door is wrapped as a small separate piece, so it can open without stress.

To know how much vinyl to wrap a Polestar 3, compare the single generation in this catalog. Since the Polestar 3 has only one generation so far, from 2022 onward, the film estimate stays the same for all production years. Minor trim differences do not change the overall dimensions of the SUV.

Questions about wrapping a Polestar 3

How much vinyl does it take to wrap a Polestar 3?

You need about 69 ft (21 m) of 60-inch (1.52 m) cast film to wrap a Polestar 3 fully. If you choose chrome or patterned film, plan for about 80 ft (24.5 m). These estimates come from the first generation body produced from 2022 onward.

Can I wrap only the hood or the roof of a Polestar 3?

Yes, you can wrap only the hood or the roof of a Polestar 3 as a partial job. Mirrors caps are another small area that can be done alone. For a blacked-out look, a chrome delete covers only the window trim and badges.

Is a Polestar 3 hard to wrap?

A Polestar 3 is not especially hard to wrap, but two features add work. The tailgate has the rear glass built in, so the film must end at the glass edge with a clean cut. The charge port door is wrapped as a small piece of its own, and the 192.9 in (4,900 mm) length means more film to handle.

How many generations of the Polestar 3 does this page cover?

This page covers one generation of the Polestar 3, the first generation. It was introduced in 2022 and is still in production. All wrap estimates and notes on this page refer to that single body style.